Do I really need to replace the drum on my Brother printer

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

Why does Brother printer say replace drum?

Without a chip, your drum unit has no way of being able to associate itself with your Brother printer. As a result, you will get the “Replace Drum” message because your printer thinks that you’ve not installed a drum unit. On the right is a standard toner cartridge with a chip.

What happens if I don't replace printer drum?

A degraded drum unit can cause streaks, smudges, and blank spots on your printed page even if you just inserted a new printer toner. While a broken drum unit won’t break your printer, it will just fail to stop printing at a certain point.

How do you fix a drum on a Brother printer?

Replace Drum.
Drum End Soon.
Drum Stop.

How long do Brother printer drums last?

The yield of a drum unit is approx. 15,000 pages (1 page/job). There are many factors that determine the actual drum life, such as the temperature, humidity, type of paper, type of toner used and so on. Under ideal conditions, the average drum life is estimated at approximately 15,000 pages.

How do I reset my printer after replacing drums?

Make sure that the machine is turned on.
Open the front cover.
Press and hold OK for 2 seconds.
Press the Up arrow key or 1 to reset the drum counter.
Close the front cover.

Is toner and drum the same thing?

In short, the toner cartridge is a container that contains the toner powder, whereas the drum unit is an electrically charged cylinder that transfers the powder onto paper.

What does printer drum do?

What is the drum unit? The drum unit transfers the toner to the paper. The laser printer puts the toner on the roller called “The photosensitive drum” inside the drum unit, and then prints letters and images by fixing toner to the paper by heat and pressure.

How do you know when your printer drum needs replacing?

The drum unit may need replacing if you notice the printer producing blurry, low-quality images. Black or colored toner spots on printouts also indicates a failing drum unit. In some cases, horizontal lines may develop across the printout every time the paper passes the failing part of the drum.

Can you clean a printer drum?

Look for chunks of toner on the drum unit. … After you have removed the chunks of toner, dip a cotton swab in rubbing alcohol. Carefully wipe off any dirty areas visible on the drum. If the drum unit is dirty, apply some rubbing alcohol onto your lint-free cloth and carefully wipe the body of the drum unit.

Article first time published on

How do I check drum status on Brother printer?

Press MENU and choose Machine Info. => Drum Life.
Press the OK key. Your Brother machine’s LCD will display the percentage of remaining drum life.
Press the STOP/EXIT key.

Do laser printer drums wear out?

A laser printer drum’s shelf life is approximately two years if the drum is still in its protective bag. Leave your printer’s drum in its protective bag until you’re ready to install the component.

How do you reset the drum on a Brother MFC l2710dw?

The printer should be on.
Close the front of the printer.
Hold down the “OK” button and the “up” arrow at the same time.
Press the “OK” button to select “Drum”.
Press the “up” arrow to reset the counter.

How do you reset the drum on a Brother HL l2320d?

Open the front cover.
Press and hold the “Go” button until all LEDs light up. Once they are lit, release the button.
Close the front cover.
The Drum LED should now be off.

How can I extend my brother drum life?

You can extend the drum life and keep it clean by occasionally cleaning the corona wire. You can simply do this by sliding the little plastic piece attached to the corona wire back and forth a couple of times. After you replace your drum, don’t forget to reset it.

Why is my Brother printer printing dirty pages?

– If the dots are random on the page, check for loose toner inside the machine and around the drum area. A toner cartridge that is leaking or has leaked inside the machine will need to be replaced. Do not remove the toner cartridge from the Brother machine until you are ready to replace it.

How do I know if my laser printer drum is bad?

The most obvious is most common on laser color printers and can be detected by a flashing message on the printer display screen. Other signs of a bad printer drum include printing blank pages, printing gray pages and strange sounds coming from the printer as it prints.

Can a printer drum be repaired?

In a laser printer, the drum is one of the key components used to ensure high quality printing. … If you are experiencing laser printer problems, such as paper jams or splotchy printing, you may need to either repair or replace the drum. Troubleshoot the problem to confirm that the laser drum needs to be repaired.

How do you reset the drum on a brother mfc 7360N?

BROTHER MFC-7360N/MFC-7362N Open the machines front door where you would replace the cartridges. On the top panel you will see a “clear/back” button. Press it and on the display you will see a reset menu come up. Arrow to desired item (toner, drum etc) and press the OK button.