In summary. In summary, for Venetian, roller and vertical blinds, we would recommend they be hung from within the recess. However, Roman blinds would be better suited outside the recess, as they are able to let more light enter into the room.
Do blinds go inside window frame?
An inside mount is when blinds or shades are installed inside the top of the window frame. … Installing window treatments as an inside mount gives your windows a clean, finished look, allows blinds or shades to be flush with the trim or wall, and doesn’t cover decorative molding.
How close should blinds be to the window?
2) Measure distance from where the top of the blind will be located to the window sill. The blind should overlap the window opening on the top by at least 1-1/2″. Some products may require more then 1-1/2″ above the window for mounting hardware.
Where do blinds go in a window?
Outside-mounted blinds or shades are mounted on the wall outside the window frame, on the window trim or even on the ceiling above the window. Outside mounted window coverings may be right for your home if: You want to block more light. Outside mounts cover the entire window.Should blinds be flush with wall?
1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
What is the difference between inside Mount and outside mount?
As opposed to inside mount when the coverings are mounted inside the window frame, outside mount is mounted on the wall above the window and directly on the trim. Because of this the blinds or shades will need to be wider than your window opening.
Where should inside mount blinds be placed?
Inside mount blinds and shades are installed with the brackets attached to the inside of the window frame, and depending on the bracket, they can be placed almost anywhere on the top, or the corner of the inside window frame.
How much smaller should blinds be than the window for inside mount?
Inside-Mounted Vertical Blinds Window should have a minimum recessed space of 2 3/8″ for inside mount. Measure the width of the window from the top of the opening to the sill in 3 places. Use the smallest dimension for the blind width. The factory will automatically deduct up to 1/4″ – 1/2″.How deep should inside mount blinds be?
3⁄4″ is the minimum depth required for inside mount blinds.
How much space should be on each side of blinds?Blinds.com recommends at least 1.5″ of overlap on each side of the window for blinds and shades, and 2″ of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.
Article first time published onShould blinds be against the window?
If looks are your major concern, then choosing inside mounting is the best choice. Inside mounted blinds enable you to look your window to smooth and have the less visual effect on the room. If you don’t get along too well with installation guides and measuring tapes, then inside mount should be your choice.
What does inside mount blinds mean?
Inside mount refers to blinds and shades that are installed within the confines of a window frame. That means the headrail is attached flush with the top of the window frame and the window treatment is fully contained inside the four corners of the frame itself. Pros: Inside mounts provide a sleek, built-in appearance.
What does inside Mount mean?
An inside mount simply means that the window covering fits neatly inside the window, outlining crisply the inside of the window frame and snugly fitting all around the inside. … You might have to choose an outside mount if the window is not deep enough for the mounting brackets.
