How do i know what moen shower cartridge i need

If not the series number can be usually be found on the underside of the faucet or on the decorative escutcheon ring that goes around it. The second way to identify your Moen valve cartridge is to remove the old one. You will do this by first shutting off the hot and cold water feed to your shower.

How do I find my shower cartridge model number?

Check behind the shower handle at the center of the trim plate to find the manufacturer symbol or brand name. “K” is for Kohler, “M” for Moen while Price Pfister, Delta and American Standard have their full names on the faucet. You can also use the cartridge length to find the brand name.

What is the difference between Moen 1200 and 1225?

Moen 1200 has an all-round brass design which ensures longevity in the long run. But in terms of performance, Moen 1225 can offer you better performance with its 1GPM water discharge rate. While Moen 1200 does not support Posi-Temp shower valves, Moen 1225 is compatible with almost any faucet.

Is there a difference between Moen 1225 and 1225B?

The difference between the 1225 and the 1225B is with the packaging. The cartridges are exactly the same, the package in which the part is displayed is different.

How do I know what model Moen faucet I have?

Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).

How do I know what type of shower valve I have?

Assess the faucet and determine how many handles it has. If it has two handles, it is a double-handle faucet, which means that the hot and cold water pipes each connect to separate handles. If it has one handle, it is a single-handle faucet. If the faucet has three handles, it is a rare three-handle model.

What is difference between Moen 1222 and 1222B?

There is absolutely NO difference between the Moen 1222 vs 1222B replacement cartridges. They are both the replacement part cartridge for the Posi Temp Moen shower valve. They are made from the same parts, the only difference is their packaging and model number. The “B” in the 1222B model number stands for Bulk.

What size Allen wrench does Moen use?

For the most part, Moen uses hardware that will require a 7/64 inch hex wrench. This applies to Moen Renzo faucets, handle set screws on one-handle kitchen faucets, and PosiTemp levers in Moen showers.

Are all Moen shower valves the same?

For many years Moen tub/shower valves have been manufactured using one of three valves. These valves are Standard, Posi-Temp and Moentrol. Although the look is similar, the trim is not necessarily interchangeable. … Note:Posi-Temp trim and Moentrol trim are not interchangeable.

Are all shower cartridges the same?

Although you’ll find many variations on a theme out there, there are only a few basic shower valve cartridge types. The original style was called a compression faucet and had two handles: One for hot water and one for cold. Each faucet has a valve regulating water flow and an onboard washer to create a pressure seal.

Article first time published on

What is the most common Moen shower cartridge?

Moen shower valve models There are many models of Moen shower faucets. But the most common takes the standard Moen 1225 cartridge, 1200 cartridge and the pressure balancing Moen 1222 cartridge.

Are Moen cartridges interchangeable?

Moen shower faucets cartridges are not universal and therefore not interchangeable. … The faucets they are installed in work differently. The main difference between the Moen 1222 and 1225 cartridges is that faucets with the 1225 cartridge have water volume control while faucets with the1225 cartridge don’t.

What is the Moen logo?

The Moen logo has been specially created for our brand. It features the waterdrop symbol, the Moen wordmark and our long-established tagline. The full-color logo is always preferred and should be used whenever possible.

Are shower valve cartridges universal?

Cartridges aren’t interchangeable among different faucets, so if you decide you need a replacement, you need to know its part number so you can order it from your plumbing supplier or online. That number is usually available on the manufacturer’s website in the online version of the owner’s manual for your faucet.

What are the different types of shower valves?

In a nutshell, there are three different types of shower valves on the market: pressure balancing shower valve, thermostatic shower valve and diverter shower valve.

What is the difference between Posi Temp and Moentrol?

Moentrol and Posi-temp is up to the user. With Moentrol you can set the temp and pull the handle to get your pre-set temp. With Posi-temp you have to pass cold to get to hot and no volume control.

What size Allen wrench takes off a Moen shower handle?

The handle set screw can be removed with a 7/64 wrench. APhillips screwdriver is used to remove the handle.

How do I know my Allen key size?

Measure the Hex Key Hex keys measurements are done across-flats or AF. This simply means that they are measured from one flat side of the head to the one directly across from it.