How do I turn on my Rainbird sprinkler system after winter

Turn on the main water supply for the sprinkler system. … Open the ball or gate valve all the way once you hear the water rushing through the pipe.Press the “Manual” start button on the Rainbird controller.

How do I know if my Rain Bird controller is connected to the Internet?

Check to see if your controller is currently connecting to the WiFi network by pressing on the picture of the controller in the Rain Bird App.

Does my Rain Bird have WiFi?

Yes! The Rain Bird App does not require an internet connection to talk to the controller, if the controller and smart device running the Rain Bird App are on the same local WiFi network.

What is the Rain Bird controller password?

The controller password is restricted to letters and numbers, 4-8 digits in length. No special characters. If you use a special character it will not be registered in the password. As an example, if you typed in [email protected], the password would be stored as 1234.

Why is my Rainbird not working?

Circuit breaker/fuse – Check the condition of the circuit breaker or fuse, if it has been blown the most likely reason is a field wiring short. An Electromechanical controller will stop on the station that caused the problem. Reset the controller to its rest position and replace the fuse or reset the circuit breaker.

What does alarm on Rain Bird mean?

Controller Alarms Red alarm light on the controller front panel is illuminated. The controller is reporting an alarm condition. Turn dial to Auto, press the Alarm button, review the alarm conditions, and address the issue(s).

What does it mean when the rain sensor is flashing?

If the LED is flashing, the selected Transmitter location is within range. The rainfall setting determines the amount of rainfall needed to prevent your irrigation system from watering.

Why is my sprinkler head not rotating?

The most common reason for a sprinkler to stop rotating is the accumulation of debris in the filter. … When in operation, water turns a small turbine in the base of the sprinkler, which drives a series of gears that cause the head to rotate. The Hunter gear drive mechanism is sealed from dirt and debris.

Why is my sprinkler not oscillating?

If the water level is too low, the distribution bar on an oscillating sprinkler may be unable to move at all, or it may move very slowly to the end of the cycle, then be unable to move past the pivot that sends it back in the opposite direction. (This varies a lot between models.

When should I turn on my sprinkler system in the spring?

To keep your irrigation investment safe, monitor the weather and wait until temperatures consistently remain above freezing through the night. Typically, the best time to start up your sprinkler system is between the middle of April and the middle of May.

Article first time published on

Should solenoid be on or off?

Avoid over-turning the solenoid in either direction, as this can cause damage to the components or cause pressurised water to escape the solenoid. When you hear water rush through the device, it’s easy to tell that the valve has opened successfully.

Does Rain Bird have an app?

Download the Rain Bird app for iOS and Android today.

How do Rain Bird rain sensors work?

How rain sensors work. The two leading manufacturers of irrigation products, Rain Bird and Hunter, both make rain sensors and both detect rain using the same method. They have a series of porous cork discs that when they get wet from rain, they expand and force the sensor to prevent the controller from watering.

You Might Also Like