How do you attach curtain tape to header

Place the header tape on the back of the panel so the upper edge of the tape is 1/4 inch down from the fabric fold and the tape covers the raw edge of the fabric. Pin the tape in place across the width of the panel, allowing an extra inch of tape on each side.

Which way up does curtain header tape go?

Ensure that the tape is the correct way up – yellow line at the bottom, and that the hook pockets are facing you. Machine the tape to the curtain along the turquoise sewing lines, leaving 3mm between the top of the tape and the top of the curtain. The top and bottom rows must be stitched in the same direction.

How do you sew lining tape on curtains?

Stitching the Tape to the Curtain. Straight stitch along the top and bottom of the tape. Take the material over to your sewing machine and use a simple straight stitch to sew across the top of the tape so it’s attached to the liner. Then, sew straight stitches along the bottom of the tape so it’s completely secure.

What is header tape for curtains?

Drapery header tapes to make the perfect pleat in your drapery project. Cartridge pleat, goblet pleat, etc., we have what you need for your perfect pleat!

How do you attach hooks to rod pocket curtains?

If you don’t want to use header tape, or don’t have access to a sewing machine, simply slide your pinhooks up into the rod pocket. Space your pinhooks 4 inches to 6 inches apart for curtains that lie flat between the hooks and 7 inches to 12 inches apart for a swoop between pinhooks.

Should you wrap exhaust headers?

Header Wrap keeps the heat in the pipes. This improves exhaust flow and The Scavenging Effect. It also lowers underhood temps. Wrapped headers will make a little more Torque and Horsepower than a bare metal set.

How do you put string back in curtains?

Push one end of the drapery cord up into the pulley housing on the left side of the left pulley. There are two pulleys inside the housing, and the cord should be on the left side of both. Work the cord over the top of both pulleys toward the right, then pull the end out the right side of the pulley housing.

What is the toilet roll trick?

You can use empty toilet rolls as curtain spacers, so the pleats hang evenly at regular intervals instead of some being bunched up and others spread out. And it turns out this trick is easy to do without having to take your curtains down. So don’t just chuck out the cardboard tubes.

Can you use tie backs with eyelet curtains?

Eyelet curtains don’t need to be tied back because of how they drape, but you can install wall-mounted tie backs if you want to. From the top of the window frame, measure two-thirds down.

What is the toilet roll hack for curtains?

To recreate the look all you need to do is save up your empty toilet rolls. You can either take the curtains off entirely and put a tube between each eyelet, or cut down the tube length-ways and wrap it around the curtain pole.

Article first time published on

How do you hang curtains without a rod?

1. upholstery tacks.
2. tension cables.
3. hook-eye screws and drapery pins.
4. staples and furring strips.
5. cabinet knobs.

Can you use hooks with rod pocket curtains?

Using curtain rings with hooks on rod pocket curtains is another way to allow for easier opening and closing of your curtains. These sharp metal curtain hooks are attached to curtain rings. You secure the rings to the curtains by sliding the hooks into the fabric on the back of the drapery.

How do curtain pulls work?

A drapery puller is a long rod that is used to pull or push draperies open or closed. You simply hold one end in your hand, and the other up at the top of the draperies, then simply slide the drapery back and forth along the rod with the puller.

Does header wrap cause rust?

The main reason exhaust wrap can cause premature rust is because it holds moisture. … If you paint your exhaust parts with a high temperature paint and then wrap them, the rust issue will either be reduced or completely eliminated. Header paint is available at many auto parts stores.

How long do wrapped headers last?

The insulating properties of header wrap will help the scavenging process even more, because unlike ceramic, the material used in header wraps don’t retain heat on the surface. DEI’s Titanium wrap is resistant to chemicals and will retain its original color for the life of the wrap, which can be three to five years.

Do you need silicone spray for exhaust wrap?

The DEI High Temperature (HT) Silicone Coating provides lasting protection for any hot surface up to 1500 degrees Fahrenheit. DEI recommends the use of this coating with their exhaust wrap because it seals the material and provides lasting protection from oil, dirt and road grime.

Can you hang back tab curtains with rings?

Tabs on the back side of heavier curtains are designed to support the the fabric, which lets the curtains hang properly without sagging or bowing. Hanging heavy curtains with rings can cause the clips to pull, snag or tear the top edge of the fabric.