With the pump running, take the power switch down to the “Off” position, and then back up to “Auto”. You should hear a click within 10 or 15 seconds. When you do, press the diagnostic button five times in a row. The system will go through a recalibration process.
How do I reset my Aqua Rite board?
Push the diagnostic button until “t-xx” appears on the display. Press Diagnostics button 5 times to display Instant Salt level. Wait for the number to settle. To reset, turn the unit to Off and then back to Auto.
How do you calibrate a Hayward Aqua Rite salt chlorine generator?
Turn Salt System Off and On With the pump running, take the power switch down to the “Off” position, and then back up to “Auto”. You should hear a click within 10 or 15 seconds. When you do, press the diagnostic button five times in a row. The system will go through a recalibration process.
How do I reset my Aqua Rite chlorine generator?
To reset, move the switch to ‘Off’ and then back to ‘Auto’. Wait for the relay to click (5 to 10 seconds). When the instant salt level is stable (and the negative sign still present), slide switch to ‘Super Chlorinate’ and back to ‘Auto’. It takes about 30 seconds for the unit to settle back on the default reading.How do I know if my salt water generator is working?
The easiest way to ascertain if the chlorinator is working is to make sure the cell is clean by checking the needle or production lights. Ensure there is enough salt in the pool. On the chlorinator box there should be a light or dial that indicates it is working.
How do you reset inspect on Hayward?
If the Inspect Cell Light is the only LED light flashing, then you can reset it by simply holding down the diagnostic button for 3 seconds, then release. The Inspect Cell indicator will now reset and will later come back on after another 500 hours of use.
How do I reset my Hayward Aqua Plus?
Turn the filter pump on. You must reset the system by entering the ‘Diagnostic Menu’ and then hitting the right arrow key once and then pushing the plus key once. This should reset the light and message.
What should my chlorine generator be set at?
We suggest you start your salt chlorine generator at 50 percent output and run it for a couple of days, then check the chlorine level. In a balanced pool, a good chlorine level is 1-3 parts per million. If your chlorine levels are low, you can raise the percentage, and if it’s high you can lower the percentage.What should my Hayward salt generator be set at?
The ideal salt level is between 2700-3400 ppm (parts per million) with 3200 ppm being optimal. If the level is low, determine the number of gallons in the pool and add salt according to the chart on page 4. A low salt level will reduce the efficiency of the Aqua Rite® and result in low chlorine production.
What setting should my salt generator be on?Try to maintain a consistent salt level of between 2,700 parts per million (ppm) and 3,400 ppm, with 3,200 ppm being ideal.
Article first time published onWhat happens if salt level is too high in pool?
Having too much salt in your pool water can result in unnecessarily increasing chemical expenses. But having too little salinity restricts the amount of chlorine being generated and can lead to algae and bacteria growth.
How do you test a Hayward Salt Cell?
Turn off the power to the system and deactivate the pool pump before removing the Turbo Cell. Remove the Turbo Cell. Once removed, look through the cell and inspect for scale formation (light colored crusty or flaky deposits) on the plates and for debris that is caught on the plates.
How do you convert Aqua Rite to metric?
To change the unit from Metric Mode to US Standard , start by pressing the ‘Diagnostics’ button one time. Once showing the temperature in Celsius, move the switch up to ‘Super Chlorinate’ then back to ‘Auto’. After 30 seconds the unit should settle back to the default reading.
What number should my Hayward chlorinator be set at?
How much salt does the system require? Salt Systems work best with approximately 3200 parts per million (ppm) of salt, which is roughly the equivalent to a teaspoon of salt per gallon. However, all Hayward Salt Systems are designed to operate with salt levels anywhere from 2700 ppm to 3400 ppm.
How many pucks are in a Hayward chlorinator?
Your CL-220 holds up to 18 large (3″ diameter) tablets (about 9 lbs.) and has a dial type control valve to regulate the rate of water flow through the chlorine feeder. This large capacity feature, under normal conditions, should provide a minimum of two weeks chlorination for large pools.
How many pucks are in a chlorinator?
It is easy to tell if you need more chlorine pucks in your skimmer basket. Since they dissolve, once they have disappeared just add more. Chlorine pucks also allow you to manually control how much chlorine is in your pool’s water. It is usually 1 chlorine puck for every 5,000 gallons of water.
Why is my salt water pool not generating chlorine?
Salinity. Chlorine generators need salt to produce chlorine and can’t do so if the amount of salt in the water is too low. The desired salinity level in a saltwater pool is between 2,500 and 3,500 ppm. … If your salinity is below 2,500 ppm, the generator will not be able to produce chlorine.
Why is my salt pool not generating chlorine?
The saltwater chlorinator needs a sufficient flow of water for effective operation. A dirty skimmer basket, clogged or dirty filter, and a clogged pump strainer, can cause insufficient water flow for the chlorinator to produce less chlorine.
How many hours a day should a salt water pool pump run?
The average pool system needs to run anywhere between 4-10 hours so you will have to gauge it yourself though testing over time.
How do you unlock the configuration menu on Hayward Aqua Plus?
Press the ‘Menu’ until, ‘Configuration Menu-Locked’ appears. To unlock, press and hold the (<) & (>) until the text, on the display, changes from ‘Locked’ to ‘Unlocked‘ (unit will beep).
What does chlorinator off no flow mean?
The “No Flow” light indicates that the flow switch is not detecting sufficient water passing through. Check the following: cleaning the cell or the filter (see how to backwash a DE Filter or Clean a Cartridge Filter). Replace the flow sensor.
Why are my salt generator check salt and inspect cell lights staying on?
If both the “check salt” and the “inspect cell” lights stay on, it most likely means that no chlorine is being produced at this time and your salt level fell below 2300 ppm. Both lights will also stay on if the controller is set to the wrong turbo cell type, or if the cell is unplugged.
How long does a pool salt cell last?
This is all possible thanks to your pool’s salt chlorine generator cell. With proper care, a cell will last about five years. Eventually, though, it will need to be replaced.
What should my chlorinator read?
On a Hayward Salt Chlorinator, your salt reading should be between 2,700 – 3,400 PPM (parts per million) with the optimum level of 3,200 PPM.
What should pool Instant salt level be?
The ideal salt level is between 1200-1800 ppm (parts per million) with 1500 ppm being optimal. If the level is low, determine the number of gallons/liters in the pool and add salt according to the chart on page 4. A low salt level will reduce the efficiency of the Aqua Rite® and result in low chlorine production.
What should chlorinator be set at in summer?
Since it’s summer, set your salt water chlorinator to 80% to 100%.
