No, difference, they are exactly the same thing. In 1225b the “b” is the bulk packaging. Only the packaging is different. 1225 has a plastic shell and 1220 has a brass, all metal shell.
Is there a difference between Moen 1225 and 1225b?
No, difference, they are exactly the same thing. In 1225b the “b” is the bulk packaging. Only the packaging is different. 1225 has a plastic shell and 1220 has a brass, all metal shell.
How do I know if my Moen cartridge is bad?
- Leaking from the handle, tub spout or shower head when off.
- Difficult to open or close shower valve.
- Difficult to turn shower handle.
- Inability to get very hot or very cold water.
How do I find the model number of my Moen faucet?
Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).What is the difference between Moen 1200 and 1225?
Moen 1200 has an all-round brass design which ensures longevity in the long run. But in terms of performance, Moen 1225 can offer you better performance with its 1GPM water discharge rate. While Moen 1200 does not support Posi-Temp shower valves, Moen 1225 is compatible with almost any faucet.
How do you remove a Moen single handle faucet?
Some Moen faucets have handles that remove by loosening the screw in the back of the handle. To loosen this screw use a 3/32″ hex wrench. After the handle has been removed unscrew the spout collar nut by turning counterclockwise then lift and rotate the spout.
How do you remove a Moen retainer cartridge?
The official instructions for removing the Moen 1224 cartridge are to remove the retaining nut and then simply pull up with a pair of pliers on the cartridge to remove it. But, if the cartridge has been in place for five or more years and you have been using hard water, this may not work.
What does ASME A112 18.1 mean?
ASME A112.18.1/CSA B125.1 1 covers the design requirements of plumbing supply fittings. Faucets are required to function at pressures of 20 to 125 psi at a rated temperature of 40°F to 160°F.Where is the part number on a Moen faucet?
The model/series number is usually a four or five digit number and can be followed by letters. On the underside of the spout, the series number may be found. There is a decorative ring at the bottom of the spout that has a series number on it.
How do I identify my faucet manufacturer?The most obvious and quickest solution is to look for a logo — the manufacturer’s symbol — that identifies its faucets. Each manufacturer has a distinctive logo that sometimes appears on the escutcheon — the plate beneath the faucet — the body of the faucet, the spout itself or somewhere on the handle.
Article first time published on
