How do you change the spark plug on a Yardworks lawn mower

Spark plugs are typically located on the back or side of a lawn mower engine. Look for a short wire that’s about 1/4-in. -thick leading to the top of a short, cylindrical protrusion from the engine. If you’re not sure where the spark plug is, consult your owner’s manual.

Where is the spark plug on a yard machine mower?

Spark plugs are typically located on the back or side of a lawn mower engine. Look for a short wire that’s about 1/4-in. -thick leading to the top of a short, cylindrical protrusion from the engine. If you’re not sure where the spark plug is, consult your owner’s manual.

What are the symptoms of a bad spark plug on a lawn mower?

A bad spark plug often causes an engine cylinder to misfire or sound like it’s struggling. The engine might even stall out completely while you are mowing. You may also notice that it becomes increasingly more difficult to restart the mower each time that it dies.

How do you remove a spark plug from a lawn mower without a spark plug wrench?

  1. Park the lawnmower on the plane surface.
  2. Gather some basic tools.
  3. Pull the spark plug out using a wrench.
  4. Pull the spark plug out using a nose plier or other tool.
  5. Pull them out using a magnet and a wrench.
  6. Pull it out by a rubber hose/ pipe.

What size socket wrench Do I need to remove a spark plug from a lawn mower?

Drive socket wrench in 1/2 inches or 3/8 inches, whichever is appropriate for your machine. New spark plug.

Do I need a special tool to remove spark plugs?

You’ll need just a few tools to change out the spark plugs on your car. The most important tool is a socket wrench with an extension and a spark plug socket. Spark plug sockets come in two sizes: 5/8 inches and 13/16 inches. Most spark plug sockets have a rubber insert that holds the plug snugly in place.

How do you remove a spark plug?

Gently grasp a spark plug wire by the boot (the place where it connects to the spark plug), twist it, and pull it straight out. Never yank on the wire itself (you can damage the wiring). The shiny thing sticking out of the engine block after you remove the wire from the spark plug is the terminal of the spark plug.

How often should lawn mower spark plugs be changed?

For standard lawn mower and small engine maintenance, you should check and/or replace spark plugs: once a season. every 25 hours of use. if your lawn mower our outdoor power equipment won’t start.

Will a lawn mower start with a bad spark plug?

A dirty or fouled spark plug can cause your lawn mower to not start. It can also work itself loose, causing issues. If the spark plug appears to be seated correctly but the engine doesn’t start, a new one may be in order.

Are all lawn mower spark plugs the same?

The spark plugs in both types of engine work on the same basic principle. … Some automotive and lawn mower spark plugs may be interchangeable, but many others are not because of physical differences.

Article first time published on

How do I know what size spark plug socket I need?

Most spark plugs require a 5/8″ (16mm) size spark plug socket. This refers to the size of the flats on the spark plug that are in contact with the socket. This spark plug requires the 5/8″ spark plug socket, which will probably fit a 3/8 ratchet extension.

When changing spark plugs What else should I change?

Whenever you change spark plugs, it is a good idea to replace the ignition wires and vice versa. This will keep your vehicle running at peak performance and prevent you wasting money on unburned gasoline. In fact, a sudden drop in gas mileage may be an indicator that your ignition system is not functioning properly.

Should you disconnect the battery when changing spark plugs?

No. The battery will not cause any problems when changing the plugs. The one thing to avoid is accidentally dropping a tool and having it contact the positive battery terminal and the car body. If this occurs, you will get a spark and possibly blow a fuse.

How can you tell when a spark plug is bad?

  1. Rattling, pinging or “knock”-like noises. When spark plugs begin to misfire, you may notice unusual noises from the force of the pistons and combustion not working properly. …
  2. Hard vehicle start. …
  3. Reduced performance. …
  4. Poor fuel economy.

What are spark plug pliers used for?

Used to Remove Stubborn Spark Plug Wires on GM 3.1L, 3.4L, 3.8L and Other Engines. The 5/8″ opening of the pliers properly fits spark plug wire boots to prevent damage to spark plug wires.

Why is my lawn mower turning over but not starting?

The most common reason for a riding mower cranking over but not starting is bad gas, but other possible reasons include: Gas Valve Off. No Gas. Choke Fault.

Can you clean a spark plug with wd40?

WD-40 removes carbon residue and keeps moisture away from spark plugs and spark plug wires. WD stands for Water Displacement, so if your spark plugs are wet or you need to drive moisture away from ignition distributors, for example, WD-40 is a product you should have handy!

How long does a spark plug last in a lawn mower?

Typically, the consensus among the mechanical engineer community is that a spark plug for a lawn mower will last up to 25 hours of use. Some users simply prefer to replace it every mowing season as a part of their yearly lawn mower maintenance.

Can I clean and reuse spark plugs?

Technically, yes, you can clean spark plugs, however, in most cases it’s not worth it. We do not recommend it for a number of reasons. Ultimately, you won’t get the same performance from a cleaned plug as from a new plug.

Can you use a different spark plug for a mower?

Yes there are different plugs for different engines. Usually you need the engine model on your mower, and take in the old spark plug to the hardware store. Ask for someone to help you find the right spark plug and tell them your engine model and mower model.

What kind of spark plug does a Briggs and Stratton?

Replacement Part TypeBriggs & Stratton Spark Plug Part NumberSpark Plug GapExtended Life Series® OHV Spark Plug Platinum (Replaces Champion RC12YC)696202 5066 (5066D, 5066H).030”Resistor Spark plug – hotter spark (Replaces Champion RC14YC)496018S 5092.030”Resistor692051.020”

What do spark plugs do when going bad?

Common signs of faulty spark plugs include slow acceleration, loss of power, poor fuel economy, engine misfires, and difficulty starting the car.

You Might Also Like