How do you hang a curtain rail on a wall

Place all pole parts on the floor in front of the bay window to calculate the position of the brackets.We recommend that curtain poles should sit 10cm above the window. … For standard brackets, align one at the centre point of the window and one at each end, placed 10cm from where you want the pole to finish.

Where should curtain rail brackets be placed?

  1. Place all pole parts on the floor in front of the bay window to calculate the position of the brackets.
  2. We recommend that curtain poles should sit 10cm above the window. …
  3. For standard brackets, align one at the centre point of the window and one at each end, placed 10cm from where you want the pole to finish.

How far out should Curtain rods extend?

As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.

Can you screw curtain rail into plasterboard?

When buying new curtains, most people limit themselves to installing them over framed windows. … Plasterboard (also known as drywall or gib board), may look solid enough, but it won’t hold a screw, and if you mount a curtain rod improperly, you’ll end up with a sagging curtain and a hole to patch.

How much should a curtain rod overhang?

When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side. This allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges.

Where should I hang my curtain rod?

DO Hang High The higher the curtain rod, the taller the window will appear, so fix your curtain rod closer to the ceiling than the top of your window, if you can. One rule of thumb is that they should sit 4-6 inches above the window frame.

How do you hang curtains without drilling?

  1. Use 3M Command Hooks.
  2. Try Kwik-Hang Curtain Rod Brackets.
  3. Use Tension Rods.
  4. Get Creative With Coat Hooks.
  5. Try Magnetic Rods on Metal Doors.

Do curtain rods need to be hang on studs?

Well, you do NOT need a stud to hang a curtain rod, but you will need a special type of wall anchor to hold the weight. There are two different types I like to use: a drywall anchor or toggle bolts. … TIP: If you could have a stud in your wall, use a 1/8″ drill bit to check first.

How high should a curtain rod be for 84 inch curtains?

The length of the curtain dictates the height of the rod. If you buy 84-inch-long curtains, the rod must be mounted roughly 84 inches from the floor if the curtains hang from the rod without rings. This lets the hem of the curtains brush the floor.

Should curtains touch the floor or window sill?

In formal or dressy rooms, curtains should just touch the floor. A romantic room deserves elegant, extra-long curtains that pool or puddle on the floor. Curtains to the sill, or to the bottom of the window trim (called the apron), look great and are practical in a kitchen.

Article first time published on

How do professionals hang curtains?

  1. Hang them high. Especially in rooms with low ceilings, be sure to hang your curtain rod as high as possible. …
  2. Hang them wide. …
  3. Hang them in the right length. …
  4. Hang the right amount of panels. …
  5. Hang the right style of panel.

What anchors to use in plaster walls?

Plastic wall anchors, Molly Bolts or Toggle Bolts? Plastic wall anchors don’t work with lath and plaster walls. Instead, use plaster anchors made of metal like a molly bolt or a toggle bolt. Be sure to use one that’s long enough to get behind the plaster and lath.

How do you fix blinds to plasterboard?

  1. Use a flat drill bit to drill a hole in the plasterboard. Top tip – for a dot and dab or double depth plasterboard, use our undercutting tool.
  2. Use a hammer to gently tap the fixing into the drilled hole. …
  3. Use a screwdriver to turn the cam and open the wings for super grip strength.

Will no nails hold curtain rails?

The best way to hang curtains without damaging the wall is to choose a no-nail hanging option. Keep in mind, you’ll need to choose lighter weight curtains for most of these options to work well. But there are great curtain and curtain rod options out there that can provide both privacy and a nail-free wall.

Can you hang curtain rod on drywall?

You’ll need to use plastic wall anchors to provide proper support if you’re installing in drywall. Fasten the brackets to the walls using your drill or screwdriver. Having a hand tool ready often makes this job easier, since it can be hard to use a larger electric drill when mounting curtain rod hardware to the wall.

Can you hang curtains on drywall?

Hanging curtains on drywall is not as simple as it looks. Drywall will not hold a screw because it’s not solid. If you mount a curtain rod with a screw, over time you will end up with a sagging curtain and hole. Using drywall anchors is the only solution.

How much weight can drywall hold?

Thin drywall will hold 1.2 to 1.6 pounds per square foot without some type of support. Thicker drywall will hold 1.5-2.1 pounds per square foot without additional support. Shear and tension affect the weight supported.

How do you use anchors for drywall?

  1. STEP 1: Choose the right drywall anchor. …
  2. STEP 2: Twist the self-drilling wall anchor into drywall with moderate pressure. …
  3. STEP 3: Turn the drywall anchor in until the lip is flush with the wall. …
  4. STEP 4: Attach your rack or shelf to the wall by screwing into the drywall anchor.

How can I hang curtains without a rod?

  1. upholstery tacks.
  2. tension cables.
  3. hook-eye screws and drapery pins.
  4. staples and furring strips.
  5. cabinet knobs.

How do you cover a whole wall with curtains?

  1. Measure the length and width of the wall space you wish to cover, using a tape measure. …
  2. Choose your curtains. …
  3. Clear away the clutter against the wall you wish to cover. …
  4. Join 10-foot lengths of conduit with set-screw conduit couplings until your rod is the desired length.

Where do curtain hooks go?

Hang each tieback hook a third of the way up from the bottom of the curtain. Buffer three inches from the edge of the window. For example, if your curtain is 84 inches long, you would place the tieback about 28 inches from the bottom. A tieback for a 36-inch long cafe curtain would be placed 12 inches from the bottom.

How do you use curtain cord tidies?

Gently draw the cords from one end and gather to create the pleats to the required width. Take the cords and thread onto the cord tidy. Wind the excess cord around the cord tidy keeping it tight to the header tape.

How do you hang double curtain tracks?

  1. Screw Double Brackets to the wall at required height.
  2. Loosen the screws underneath the brackets slightly.
  3. Insert the back track into the back section of each bracket and snap into place. Tighten the screws as you go.
  4. Repeat step 3 to fit the front track into front section of the bracket.

What type of curtain goes on a track?

Pencil pleat heading suits all types of pole or track and is often the most common type of heading used when hanging curtains under a pelmet.

How do corded curtain tracks work?

Corded curtain tracks, they do what they say on the tin. The have a cord to the side of the track which you pull to open and close the curtains. This cord should always be secured to the wall and a minimum of 1.5m from the ground – this will ensure that a child will not be able to get entangled in the cord.

How do you hang curtains when the window is at the top of the wall?

  1. Suspension Curtain Rods. Floor-to-ceiling windows are often slightly or deeply recessed, allowing the adjacent walls to form a kind of frame. …
  2. Hardware-free Hooks. …
  3. Use Wall Brackets. …
  4. Install Ceiling Mounts. …
  5. Suspended Ceiling Hardware.

How far should curtains hang below window sill?

While fashion once dictated a “flood level” bottom line for curtains—one that hung just past the window sill, short enough that it would not get wet in a flood—today, style calls for curtains to either hang down to within ½-inch of the floor or even puddle slightly.

Should curtains touch the ceiling?

Ceiling height plays a major role in how high you should hang your curtains. … It is often best to use the 4 to 6 inches above the window trim rule here unless the windows stretch close to the high ceilings. If there is little space between the trim and the ceiling, then hang the curtains from the ceiling.

You Might Also Like