How do you hang a curtain rod with command strips

Tension rods are probably the easiest. … Magnetic curtain rods are available as are hangers that tap in behind your window frame.Command hooks can work, too. … No-Drill Curtain Rod Brackets.Velcro.

How do you hang a curtain rod without nails?

1. Tension rods are probably the easiest. …
2. Magnetic curtain rods are available as are hangers that tap in behind your window frame.
3. Command hooks can work, too. …
4. No-Drill Curtain Rod Brackets.
5. Velcro.

Will Command strips hold a curtain pole?

Hanging lightweight curtains is as easy as 1-2-3 with Command™ Medium Brushed Nickel Metal Hooks which hold up to 1kg. 1. Place your Command™ hooks on each side of the window. … Lay the curtain rod across the hooks for a sleek, modern and damage-free window hanging.

Can Command strips hold up curtain rods?

And the answer is brilliantly simple. Look no further than 3M Command hooks. Yes, the same hooks you use for hanging pictures, keys, mugs, and plants. An easy hack turns them into quick DIY supports for your curtain rod and that splash of color, sun shade, or bit of privacy you’ve been searching for.

How can I hang curtains without putting holes in the wall?

1. Use 3M Command Hooks.
2. Try Kwik-Hang Curtain Rod Brackets.
3. Use Tension Rods.
4. Get Creative With Coat Hooks.
5. Try Magnetic Rods on Metal Doors.

What can I use in place of a curtain rod?

Pipe Rods. This one is a pretty common alternative. Many people turn to copper pipes when they need a substitute curtain rod. Copper pipes have a unique look about them which is what draws many folks toward it, but you can use any style of or look of pipe.

How do you hang a curtain rod without studs?

If there isn’t a stud, you need to use a drywall anchor and a screw to reinforce your curtain rod brackets. Without a drywall anchor, a screw won’t be able to hold the weight of your curtain rod. You risk pulling the brackets out of the wall and causing further wall damage.

Can I hang curtains without drilling holes?

Dowels and Sticky Hooks A slim wooden dowel is a beautifully understated way to hang curtains. … And the beauty of using a sticky hook instead of drilling holes in the wall is that if you decide the curtains look too low or too high, you can move the rod and hooks without any damage.

How much weight can a command Strip hold?

The large strips can handle a 24-inch to 36-inch object that weighs up to 16 pounds. The smaller hanging strips can only handle up to 4 pounds.

What size curtain rod will fit in command hook?

One of the keys to successfully using command hooks for curtain rods is being mindful of weight and size. I do not use rods larger than 3/4″ in diameter. I’m also careful to use lighter materials, paying close attention to the finials. For example, look for acrylic over glass.

Article first time published on

Which Command hooks to hang curtains?

Purchase 2-3 jumbo command hooks per window. Pick a finish that is the same as the curtain rods you will be hanging. Clean wall surface where you will be applying hooks with rubbing alcohol and clean cloth or paper towel. Clean gently, rubbing too hard can remove the paint.

Do Command strips take off paint?

Command strips can be beneficial during wall decoration as they enable you to hang pictures and other objects without harming your wall. However, if not removed carefully, they might ruin your wall by peeling off paint.

How can I hang my curtains in my apartment without drilling?

1. Use Temporary Command Hooks.
2. Hang Curtains With Tension Rods.
3. Order Custom Compression Shades.
4. Make a Faux Roman Shade.
5. Buy Twist & Fit Curtain Rods.
6. Suspend Curtain Rods from the Ceiling.

Do curtain rods need to go into studs?

Well, you do NOT need a stud to hang a curtain rod, but you will need a special type of wall anchor to hold the weight. There are two different types I like to use: a drywall anchor or toggle bolts. … TIP: If you could have a stud in your wall, use a 1/8″ drill bit to check first. You will know if there is wood!

Do you need wall anchors for curtains?

You’ll need to use plastic wall anchors to provide proper support if you’re installing in drywall. Fasten the brackets to the walls using your drill or screwdriver. … Hang the curtains and double-check to make sure your brackets are still secure. Open and close to check that they’re functioning properly before finishing.

Can you hang curtains without a curtain rod?

You’re missing a great decorative opportunity if you’re not wondering how to hang curtains with or without a rod. … To hang curtains where there weren’t any before, you can put up a rod, but if you don’t want to fix one of these to the wall or prefer a different look, they can be hung without a rod as well.

How do you hang curtains without rods and hooks?

1. upholstery tacks.
2. tension cables.
3. hook-eye screws and drapery pins.
4. staples and furring strips.
5. cabinet knobs.

How do you keep Command hooks from falling down?

No worries, just grab your hair dryer and a piece of dental floss! Blow your hair dryer on the strip for 20-30 seconds, then wiggle the dental floss between the adhesive part of the strip and the surface it’s stuck to.

Are Command Hooks strong?

Jumbo hooks allow you to hold up to 7.5 pounds! Using the revolutionary Command™ Adhesive, Command™ Decorative Hooks hold strongly on a variety of surfaces, including paint, wood, tile and more. … Holds up to 7.5 lbs.

Do Command strips really work?

If you follow the instructions carefully, Command strips are highly effective. If you cut corners and don’t follow the instructions, you’ll have issues. Here are the most common mistakes people make when using Command strips: Not using enough strips.

How do you hang curtains outside without drilling holes?

If you want to hang outdoor curtains without drilling holes, tension rods are the way to go. This method is especially helpful for patios with columns made of stone or brick. You can also use ceiling-mounted hardware for brick or stone patio walls.

How do you cover a whole wall with curtains?

1. Measure the length and width of the wall space you wish to cover, using a tape measure. …
2. Choose your curtains. …
3. Clear away the clutter against the wall you wish to cover. …
4. Join 10-foot lengths of conduit with set-screw conduit couplings until your rod is the desired length.

Do Command hooks come in gold?

3M’s Sleek New Command Hooks Come In Rose Gold, Yellow Gold And Matte Black Colors.

How do I hang curtains in my apartment?

1. Hang Curtains With Command Hooks. If you have lightweight curtains, Command Hooks can be a perfect solution for you. …
2. Use Tension Curtain Rods. …
3. Get Twist & Fit Curtain Rods. …
4. Buy Simple Fit Shades. …
5. Try Kwik-Hang Curtain Rod Brackets.

Can you use Command strips outside?

Yes you can with Command™ Outdoor Products. The adhesive should be applied to a clean, smooth, dry surface when the temperature is above 15°F (-9°C). The products hold strongly down to -20°F (-29°C).

How do you use Command strips on wallpaper?

2. The Adhesive Strip for Wallpaper & Plaster should be applied to the rougher surface first. So when it comes to wallpaper or plaster, always apply it to the wall, with the blue tab facing the wall. Before using a strip, make sure that your surface is strong enough to take the weight of the object you want to attach.

Can you use multiple command strips to hold more weight?

Yes and No. If the hook you are using has the space for two to be side by side, or if you are putting it directly onto something and can put them side by side, all of the instructions indicate this does double the amount of weight that can be held up.

How long after painting can you hang Command strips?

Important tips to follow when applying Command™ Picture Hanging Strips: wait 7 days after painting before use, do not apply strips to paper or soft surfaces on frame, remove hanging hardware from back of frame, failure to follow instructions carefully may cause damage.

Do Command Hooks leave residue?

Command™ adhesive holds strongly to a variety of surfaces including wood, tile and glass as well as solid, hollow and painted walls. It removes cleanly using 3M stretch-release technology, leaving no cracks, holes, damaged plaster or sticky residue.

How do you repair walls after removing command strips?

1. Sand the wall with sandpaper where the tape was to remove any leftover adhesive, loose paint chips or small pieces of broken drywall. …
2. Apply waterproof primer to the wall if the top layer of the drywall has been broken.