How do you install a Steelcase lock core

Pull the back of the lock away from the cylinder and pull the lock cylinder out of the drawer. Look for the C-clip securing the lock to the drawer if there are no screws. Pry the C-clip off with a flat-head screwdriver. Pull the lock bolt tab off the rear of the lock and pull the cylinder out of the drawer.

How do you remove a lock cylinder from a desk drawer?

Pull the back of the lock away from the cylinder and pull the lock cylinder out of the drawer. Look for the C-clip securing the lock to the drawer if there are no screws. Pry the C-clip off with a flat-head screwdriver. Pull the lock bolt tab off the rear of the lock and pull the cylinder out of the drawer.

How do you remove a cabinet lock without the key?

Do you want to learn how to remove a file cabinet lock without a key? By using a nail clipper file, you can open a file cabinet lock by inserting it into the keyhole and jiggling the file up and down until you push down all the pins and turn the lock into the unlocked position.

How do I remove the best core lock?

Remove original core from cabinet Control Key) into the lock. Be sure it snaps completely into the lock core which drops the retainer wafer (the last wafer in the lock core). 3) Place a slight twisting force on the Core Removal Key and slowly pull the key and old core out of the lock barrel.

How do filing cabinet locks work?

The file cabinet lock is mounted inside the cabinet frame. A hole is drilled into the top of the frame right over the file cabinet drawer, and the tumbler housing and cabinet lock are inserted. … When locked, the bolt then slides into this hole, preventing the file cabinet from being opened.

How do you break into a filing cabinet lock?

1. Straighten out the paperclip while leaving one of the ends bent.
2. Insert the curved tip of the paperclip into the keyhole of the lock. …
3. Move the paper clip from left to right to find the right way to push down the pins and open the lock.

How do you put a lock on a drawer?

1. Step 1: Empty the drawer and remove the drawer from the dresser or cabinet, if possible.
2. Step 2: Locate the center point of the drawer.
3. Step 3: Drill a hole that will fit the lock shaft.
4. Step 4: Remove the lock bolt and the O-ring then install the lock in the drawer.

What is a lock core key?

Lock cores are specific to each manufacturer and lock codes, and can be “keyed alike” or “keyed differently.” Keyed alike means that the locks will all operate using the same key – these lock cores have the same manufacturer and lock code. Keyed differently means the locks will operate using different keys.

How does a desk drawer lock work?

A plunger lock is installed to the side of the desk frame. When the lock is pushed in, a “plunger” or pin gets pushed into a hole that is drilled within the drawer’s side. This locks the drawer in place.

What is the difference between a cylinder and a core?

Let’s take a look. If Standard Cylinders are being specified than the term CORE typically means the entire cylinder. If Removable Core Cylinders are being specified than the term CORE typically means just the core. Components: Housing, Core and Control Key.

Article first time published on

How does an interchangeable core work?

The basic premise of the interchangeable core system is that the core is secured into the lock housing (I. E. mortise/rim cylinder, lever, padlock, etc.) by a sleeve-based lug. A control key is specially cut key whose function is to operate the control shear line that is between the sleeve and the housing.

How do you open a locked steel cabinet?

Move the filing tool up and down slightly 3-5 times. This moves the pins of the locks so you can easily open the cabinet. Most household locks have about 5 pins, and your key effortlessly moves these pins when you insert it into the lock. You must move these pins to unlock the cabinet.

Can you make a copy of a file cabinet key?

Replacement Keys & Locks For File Cabinets Most locks have a code right on the face of the cylinder, and we can use that code to create a factory-cut copy of the key that will operate the lock. … A trained file cabinet locksmith can create a working key by hand.

Can you add locks to filing cabinets?

When you need to lock a filing cabinet, you might: just need a filing cabinet key, want to replace a missing lock, or are looking to add a lock to the filing cabinet. Depending on the application, you can lock a filing cabinet with: cam locks, filing cabinet locking bars, hasps, plunger locks and dead latch locks.

How do you install a tubular cam lock?

1. Insert the lock body through the front of ¾ inches drilled hole.
2. For the wood, place prong washer over lock body, prongs facing the wood.
3. Thread the cylinder nut, and then tighten.
4. Attached stop cam and the straight cam, and then secure using a screw and lock washer.

How does a plunger lock work?

Plunger Locks These, like the ratchet lock, are used on sliding glass doors. The lock contains a bolt that slides forward and backward, and will rest inside a slot when locked. This keeps the glass door from sliding. These locks are similar in price to door/drawer locks.

How do you lock a drawer without a key?

If you don’t have lock picks, and for most drawer locks – but not all, you don’t need them, simply straighten out two paper clips. Use 1 paper clip as the tensioning tool, use the other one like a rake pick. Keep slight tension on the lock in the direction that a key would unlock it.