How do you install recessed wall shelves

1 Lay Out Niche. Determine that the wall you’re cutting into is not a load-bearing or exterior wall. … 2 Cut Deeply Into Wall Studs. … 3 Finish Cut with a Reciprocating Saw. … 4 Rip-Cut Frame Boards to Width. … 5 Assemble Niche Box. … 6 Trim Out Niche. … 7 Fasten Niche Box.

How do you build a recessed niche wall?

1 Lay Out Niche. Determine that the wall you’re cutting into is not a load-bearing or exterior wall. …
2 Cut Deeply Into Wall Studs. …
3 Finish Cut with a Reciprocating Saw. …
4 Rip-Cut Frame Boards to Width. …
5 Assemble Niche Box. …
6 Trim Out Niche. …
7 Fasten Niche Box.

What is a shower ledge?

Put simply, a tiled shower ledge is a half-height wall built into your shower, a modern and practical way to house your most-used bathroom products. … A tiled shower ledge creates a horizontal break in the wall making it the perfect way to incorporate a feature.

How deep should wall niches be?

That means that the outside depth of your box can be no more than 3-1/2 inches, which also means the inside depth of your box will be that dimension less the thickness of the back panel (3/4″) or 2-3/4″.

How wide should a niche be?

When putting a shower niche in an existing wall, 12”w x 24”h is a good size. It allows the niche to fit between studs which are often 16 inches apart. With a glass shelf at 12 inches this creates 2 feet of shelf space. The typical depth of a shower niche is 3.5 inches, the width of a wood stud.

Are shower niches a good idea?

A shower niche is a much better solution, for relatively little expense. It’s an extremely useful feature that provides you with a proper place to keep your shower accessories, without adding bulky organizers that take up much-needed space.

How big should a niche be?

When finding the perfect spot for your niche, think about how the space will function in use. Positioning your niche at chest to eye-level is a good standard. This translates to a height of about 48 to 60 inches.

How do you support a shelf in a corner?

Corner shelving should be fixed to the support battens – with the shelf in position, mark underneath the side of the supports onto the shelf. Drill a hole halfway between the marks and the edge of the shelf to take a small screw, and countersink the top side of the shelf if necessary.

What are the angles for a corner shelf?

In a perfect world, you could just build a corner shelf with a perfect 90-degree angle in the back. But in many cases, corners are not square. If you build the shelf that way, there will be gaps at each side where the sides of the shelf don’t sit flush against the wall.

Do you waterproof Schluter niche?

Schluter-Systems has developed four prefabricated and completely waterproof shower niches that are ready to tile. Made of Schluter®-KERDI-BOARD, the shower niches are completely compatible with surface applied waterproofing systems, such as the Schluter®-KERDI and KERDI-BOARD shower assemblies.

Article first time published on

How deep is a shower ledge?

Ledge should be somewhere between elbow and shoulder height (adjust the height of the ledge so that the wall tile does not need to be cut). Depth of ledge should be approximately 4-5 inches.

How high should a shower ledge be?

Minimum Curb Height for Shower In the United States, building codes typically require tile shower curb height to be a minimum of two inches above the top of the drain. However, that doesn’t necessarily mean the curb itself has to be two inches high.

How do you attach a shelf to a shower?

If you’re adding permanent shelves, you can attach them with a heavy-duty caulk. Make sure to choose a water-resistant product and fasten the shelf in the center of a tile. A better solution is to attach your shelf to the mortar while you’re installing the tile; this creates stronger, longer-lasting shelves.

How far apart are studs?

The general spacing for wall studs is 16 inches on center, but they can be 24 inches. At my home, the exterior wall studs are spaced at 24-inch centers, but the interior walls are 16 inches on center.

How is niche pronounced?

There is a debate about how you are supposed to pronounce niche. There are two common pronunciation variants, both of which are currently considered correct: \NEESH\ (rhymes with sheesh) and \NICH\ (rhymes with pitch). \NICH\ is the more common one and the older of the two pronunciations.

What niche size means?

The niche width of an organism refers to a theoretical range of conditions that a species could inhabit and successfully survive and reproduce with no competition.