How do you refinish an old roll top desk

Remove all drawers from the desk. … Apply stripper to all wooden areas. … Apply stripper to the roll top area. … Scrap off the old finish. … Sand the wooden areas. … Stain the desk. … Complete the project by applying a coat of lacquer over the stain.

Can you paint a laminate table top?

You can sand, prime and paint laminate as if it were a solid wood piece of furniture! … Because it’s often somewhat glossy-looking, and important to sand it down until the finish is very dull before priming. We recommend using 120 grit sandpaper for this.

How do you paint a roll up desk?

Apply a light coat of primer to the desk, using a medium paint brush and working from the top down. Keep the roll top in its hidden position so you can paint the desk’s inside and the bottom piece of the roll top. Apply primer to the drawer fronts, moving the brush from side to side. Allow the primer to dry.

Can you remove the top of a roll top desk?

Modernize an old desk by removing the roll top. Rolltop desks used to be common. … Cut from bottom to top, stopping about 2 inches shy of the top lip of the desk to saw across and remove the strip. Break up the remaining strips of of wood, including the thickest strip at end, from the top of the roll top.

Can you chalk paint a roll top desk?

I painted two full coats with the paint roller, and used a brush to get into the corners and any spots that needed delicate touches. I used this particular brush for the roll top portion of the desk. … Chalk paint is a very flat finish, so this wax makes it more wipeable and easier to clean.

What kind of paint do you use on laminate furniture?

Latex paint is recommended for laminate surface painting projects because of its durability and smooth finish.

How much is my roll top desk worth?

Factors Affecting Roll Top Desk Value Age – Older desks in will be worth more, generally, than similar newer desks in the same condition. Look at the way the drawers are put together. Large hand cut dovetail joints will indicate the piece is older than if the dovetails are small and uniformly cut by machine.

How heavy is a roll top desk?

Item Weight‎338 poundsProduct Dimensions‎57 x 25.5 x 25 inchesWeight‎338 Pounds

What is the best paint for a table top?

Lacquer. Lacquer is the best type of paint you can use on a table top as far as looks and durability. You can apply it with a brush.

How does a roll top desk work?

The rolltop desk is simply a “pedestal desk”–a top set on two columns of drawers–with a top case added. All rolltop desks have a three-sided cabinet that has tracks routed along the top and front edges of each side, lined with metal or plastic so that the roll part, or “tambour,” will slide easily.

Article first time published on

How do you restore an oak roll top desk?

Apply a heavy coat of chemical stripper onto the oak roll top desk with a brush. …
Scrape the old finish off with the putty knife and steel wool. …
Sand the desk with 120 grit sandpaper. …
Wipe grain filler onto the oak roll-top desk with a cloth and work it into the wood.

What is US milk paint?

It’s an environmentally-friendly paint made from simple, 100% natural ingredients like clay, milk protein, lime, and pigment—and it’s water-based. It’s non-toxic, biodegradable, and doesn’t let off noxious fumes. Plus, it dries in under 30 minutes, unlike the 24 hours needed for oil paints.

What is roll-top?

a flexible, sliding cover for the working area of a desk, opening by rising upward and back in quadrantal grooves and rolling up beneath the top. Also called roll-top desk, rolltop desk . a desk with such a cover.

What kind of glue do you use to repair a roll top desk?

All that you’ll need to fix the desk is some heavy duty fabric and glue (I used wood glue, but I’m sure craft glue would work as well). Cut the fabric to be about four inches less than the width of your roll top and just slightly less than the length.

What style is a roll top desk?

A rolltop desk is a 19th-century reworking of the pedestal desk with, in addition, a series of stacked compartments, shelves, drawers and nooks in front of the user, much like the bureau à gradin or the Carlton House desk. … It is a relative of the tambour desk, whose slats retract horizontally rather than vertically.

What is difference between antique and vintage?

In the strictest sense, the difference between an antique and a vintage item is its age. Antiques are items which must be at least 100 years old. That means, as of the date of this posting, an antique item was made on or before April of 1918. … Vintage items are not as old as antiques.

How do I know if my desk is an antique?

Look carefully at the bottom, sides, and back of the drawer; if the wood shows nicks or cuts, it was probably cut with a plane, a spokeshave, or a drawknife. Straight saw marks also indicate an old piece. If the wood shows circular or arc-shaped marks, it was cut by a circular saw, not in use until about 1860.

Can I paint laminate without sanding?

So yes! You can paint laminate furniture without sanding! Keep in mind though, if you have any scratches or spots of nail polish (like I did), you’ll want to sand those areas so you have a nice smooth surface for your paint.

Will chalk paint stick to laminate?

Annie Sloan Chalk Paint will adhere beautifully to laminate. All I do is clean my piece to remove any residue or dirt and then apply the paint. … Once again, laminate top.

Do you need to sand laminate before painting?

Laminate is a non-porous and slick surface, so without sanding, the paint will have a difficult time sticking on it. It’s best to use fine-grit sandpaper because you don’t want to sand your furniture too much and tear right through the laminate and into the particle board underneath.

Can you paint laminate?

First, laminate can be painted over. It’s not difficult (at all), you just need to do it right. … Second, laminate is more durable than wood when it comes to scratches and dings. Most likely a piece with a laminate top will be in better condition.

Can you upcycle laminate furniture?

Laminate furniture is affordable, durable and easy to assemble. It’s also easy enough to upcycle and makeover. So you can give an old piece a new lease of life and do your bit for the environment.

Can you paint over veneer?

Veneer can be primed, painted, stained, and treated just like any other wood surface. Painting veneer surfaces is a great way to spruce up furniture, make older pieces look newer, or make an original piece match a new décor scheme.

What can I put on top of paint so it doesn't chip?

Protect it. I like to use Protect or a polycrylic. With this step, you can also use a paint sprayer or a high-quality paintbrush. A good topcoat will make your paint job stronger and hold up against little circuses that may be roaming around.

How do you paint a table without sanding it?

MINERAL PAINT (My Favorite Option) With Mineral paint you don’t need to prime anything beforehand. …
CHALK PAINT. Chalk paint is the best way to paint practically anything without sanding. …
MILK PAINT + BONDING AGENT. …
BONDING PRIMER. …
LIQUID DEGLOSSER.

What is the average width of a roll top desk?

Roll Top Desk Dimensions: Height: 47 ½” Width: 42″ Depth: 30″ …
Wood: Oak Wood (Standard) Rustic Walut Wood. …
Drawer Slides: Under-Mount Soft-Close Drawer Slides.
Standard Features: Dovetailed Drawers. Raised Panel Sides. …
Optional Features: Drawers on Top – Adds 4″ to Height. Raised Panel Solid Wood Back.