How do you remove a window screen spline

Use your pliers or utility knife to release an edge of the spline and pull it out of the frame. If there are multiple pieces of spline securing the old screening in place, repeat the process until all of the spline is removed and the old screen can easily be lifted off of the structure.

How do I Respline my screen?

1. Introduction.
2. Step 1: Cut the Replacement Material to Size.
3. Step 2: Remove the Old Screen.
4. Step 3: Lay the New Screen Across the Frame.
5. Step 4: Replace the Spline.
6. Step 5: Press the Spline into the Frame.
7. Step 6: Cut Away the Excess.

How do you remove window screen with top pins?

1. Locate the plunger pins on the inside of the screen. …
2. Pull the plunger pins inward and release the window screen.
3. Grasp the frame around the screen and push the screen outward. …
4. Turn the screen at an angle to fit it through the window.

What are plunger pins?

Plungers are mechanical components for positioning and fixing workpieces. A spring is built into the main body so that the ball or pin at the tip sinks into the body when a load is applied, and is returned to its former position by spring force when the load is removed.

Are all screens removable?

Keep in mind, the removal of every window screen is not the same. For each style of window, the screen is removed in a specific way. Don’t worry, though. All window screens, regardless the style of your window, are pretty simple to take out and place back in.

What is a spline tool?

A screen roller or spline roller is a small hand tool used to press screen mesh into the edges of a window frame that is fluted on the inner edges, or to press in the retainer spline that holds that mesh in place.

Can I reuse window screen spline?

Unless the spline breaks, it can be reused. New spline costs about $2 a roll, but be sure that it has the same diameter as the original. With the spline removed, the screen can be lifted out of the frame.

What is the standard window screen spline size?

Screening Types:5/16” x ¾”Frame7/16” x ¾”FrameStandard Fiberglass Insect Screening.140 (9/64”).140 (9/64”)Aluminum Insect Screening.125 (⅛”).125 (⅛”)Pool and Patio Screening.140 (9/64”).140 (9/64”)No-See-Ums Screening.140 (9/64”).140 (9/64”)

What can I use instead of a spline roller?

Regardless of the screen material, no other tool in the house can do what a spline roller does. A pizza cutter might seem like a good substitute, but it’s too sharp, and the wheel is too big for proper control and leverage. So don’t try a pizza cutter.

What is spline rolling?

Spline Rolling or Spline Rollers is a high production, economical cold forming process that can be used to form many shapes; including splines, threads, helixes, snap rings and more. The spline rolling process utilizes two opposing forming racks which advance over a cylindrical part under extremely high forces.

Article first time published on

What is a spring plunger?

A spring plunger, also known as a spring-loaded device (SLD), is a small and narrow device that’s used for indexing and positioning of various components. Once installed, it applies adequate pressure so the ball or nose remains positioned.

Do the tabs on window screens go on the inside or outside?

Exterior screens install over windows from the outside, usually on first floor windows. Interior screens are intended to be installed from inside the home, with the plunger pins or spring systems on the inside of the screen frame so you can access them from inside through an open window.

Can you replace flat spline with round spline?

Some frame types will only accept flat spline. We offer several sizes of the round spline if your frame will accept round spline. The spline is designed to be removable so you can rescreen / replace the screen material as needed. The flat and round spline are going to be comparable in holding the material in.