Unscrew the latch from the side of the door. Insert a flathead screwdriver between the metal edge of the latch plate and the recessed groove in the side of the door. Gently pry out the edge of the latch plate and remove the latch.
How do you remove a lock cylinder from a Kwikset deadbolt?
Hold the cylinder side of the lock in your hand with the inside of the lock facing you. Remove the clip on the side of the plug with a flat-head screwdriver or plug-removal tool. The clip will release from the plug as you move the clip side to side.
How do you disassemble a brass lock?
- Unlock the lock. You can cheat and use the key if you have one. …
- Remove screw. Using a standard phillips head screwdriver remove the retaining screw hidden under the shackle. …
- Remove the top cover. Remove the top cover. …
- Remove the Pin. …
- Remove the circlip. …
- Repin your lock! …
- Re-assemble the lock.
How do you remove a cylinder door?
- Step 1: Locate the position of the lock and unscrew the front side.
- Step 2: Remove the screw inside the lock’s body.
- Step 3: Turn the cylinder cam into a 12 o’clock position.
- Step 4: Eject the lock from the cavity of the door.
How do you remove a deadbolt faceplate?
Insert a flat-head screwdriver putty knife or similar tool into the notch or under the faceplate edge, prying outward with gentle pressure. The plate will unsnap from the interior mounting ring and will remove by pulling outward along the lever shaft.
How do you unlock a Kwikset lock code?
- Press the button marked “program button” once.
- Using the keypad, enter a 4- to 8-digit code.
- Press the ‘LOCK” button to save the code.
- Extend the bolt by pressing- the “LOCK” button.
- Enter the new code number. The bolt should retract.
How do you pick a Kwikset lock with a paperclip?
- Get a paper clip and insert it into the keyhole with the desired end.
- Next, begin to slowly twist the paperclip in the keyhole towards the opening while moving it up, down, left and right.
How do you open a locked door with a keyhole?
Insert the tip of the paperclip inside the bottom of the keyhole and push it in. Twist the base, holding your finger against the paper clip to keep its shape. Apply pressure and the lock should automatically turn to open the door.
