How do you reset the maintenance light on a 2013 BMW 328i

Turn on your car without starting the engine. … Hold down the RESET MILES button. … Find the ENGINE OIL. … Hold down the RESET MILES button. … Release the button and then hold it again to confirm the reset.

How do you reset the oil life on a 2013 BMW 328i?

1. Turn on your car without starting the engine. …
2. Hold down the RESET MILES button. …
3. Find the ENGINE OIL. …
4. Hold down the RESET MILES button. …
5. Release the button and then hold it again to confirm the reset.

How do you reset the maintenance light on a 2013 BMW X3?

1. Turn ignition to Terminal 15 which is one turn of the key or one press of the START/STOP button.
2. Press and hold the Instrument Cluster Set/Reset button for 10 seconds.
3. The upper display in the Instrument Cluster will be illuminated with a Service Item.

How do you turn off the service light on a BMW 328i?

Locate the small odometer button near the bottom left corner of the instrument panel. Press and hold it until the service message appears. Release the button, and press and hold it again until the message says “Reset?”.

How do you reset the oil light on a 2015 BMW 328i?

To perform an oil reset on the 2015 bmw 328i you need to turn it on, but do not start the engine. Find the reset button on the console dash and hold it. When the light blinks and stops turn the vehicle off and wait 5 min. Your oil is now reset.

How do you reset the oil light on a 2013 BMW x1?

1. Turn the ignition to the ON position with the vehicle off (close all doors and windows and put the vehicle in park)
2. Press and hold the TRIP reset button for about 10 seconds until the first service job appears in the display.

How do you reset the oil light on a BMW x3?

Hold in the reset button that is on the cluster menu. When the service menu appears then press the trip reset and hold for 3 seconds. Press the trip reset button again for 3 seconds. That should fix the problem.

How do you reset the service light on a BMW 520d?

Press START/STOP button without pressing clutch/brake, wait for the service reminder to disappear. Immediately, after service reminder goes out, press and hold the odometer reset. After 3 seconds a warning triangle will appear. Keep the odometer reset button pressed.

How do you reset the oil light on a BMW 328i?

Press and hold the SET/RESET button until the service indicator light appears. Press the SET/ RESET button repeatedly to scroll the service menu. With the oil change interval highlighted, press and hold the SET/RESET button.

What does service due mean on a BMW?

Service Vehicle: When this light is red, your BMW is overdue for service. When it’s yellow, it means your BMW is due for service soon. In either case, it’s best to schedule a service appointment as soon as possible.

Article first time published on

How do you reset the inspection light on a BMW?

1. Ignition OFF (POS 0)
2. Press and Hold the trip odometer button while turning key to position 1 (ACCESSORY)
3. Keep the button depressed (about 5 secs.) until you see “Oil Service” or “Inspection” with “Reset” or “Re” in the display then let go.

How do you reset the dashboard lights?

1. Open the hood of your vehicle. …
2. Loosen the nut that holds the negative terminal to the battery with the pliers. …
3. Completely remove the cable from the negative battery terminal. …
4. Leave the battery disconnected for 10 minutes to ensure that the computer is fully reset.

Why won't my oil light go off?

If your oil light stays on even after changing your engine oil, you’re going to want to check the sensor first to rule out a malfunctioning sensor as the cause. … The oil pump may not be circulating enough oil to keep the engine’s parts lubricated and functioning properly, which can in turn cause multiple engine issues.

Can you reset check engine light without disconnecting battery?

Turning the Ignition On and Off Switching the ignition on and off is also one method of hard reset without disconnecting batteries. Put the keys in your ignition and turn your ignition on and off consecutively after a second in each step. Once it is done, see if the engine check light is still coming on or not.

How do I reset my car without disconnecting the battery?

1. 3.1 Step 1: Open the hood and disconnect the battery.
2. 3.2 Step 2: Locate the car’s fuse box and remove the fuse.
3. 3.3 Step 3: Reinstall the fuse and reconnect the battery terminal.
4. 3.4 Step 4: Start the vehicle and perform a test run.

How do you turn off the service light on a BMW 1 Series?

Press the “Menu” button on the end of the turn signal arm to move through the menu until the service reset option is highlighted. Press and hold the “Reset” button until the service light resets.