How do you reset the oil light on a hyundai

Start the vehicle.Press and hold the “OK” or “RESET” button (varies by model) for 5 seconds.Release the “OK” button, then press and hold it again for 1 second. The oil change light will then reset.

How do you reset the oil life on a 2018 Hyundai Elantra SE?

The 2018 Hyundai Elantra oil life can be reset by first navigating through the LCD display menu using the MODE button located on the right-hand side of the steering wheel at the very top. Press and hold the Select/Reset button (also the OK button) until the interval resets itself.

How do you reset the oil light on a Hyundai Elantra?

1. Start the vehicle.
2. Press and hold the “OK” or “RESET” button (varies by model) for 5 seconds.
3. Release the “OK” button, then press and hold it again for 1 second. The oil change light will then reset.

How do you reset the maintenance required light on a 2012 Hyundai Sonata?

Each time Your 2012 Hyundai Sonata is serviced, the “Service Interval” settings should be reset. Press and hold the “OK” button on the right-hand side of the steering for 5 seconds, and the Service Interval will be reset to its default settings.

How do you reset the oil life on a Hyundai Elantra 2019?

To perform an oil reset on the 2019 hyundai elantra you need to turn it on, but do not start the engine. Find the reset button on the console dash and hold it. When the light blinks and stops turn the vehicle off and wait 5 min. Your oil is now reset.

How do you reset the oil light on a 2013 Hyundai Elantra?

To reset the oil light in a 2013 hyundai elantra, start the vehicle. Press the ok button and hold it down for 5 seconds. Release the button, and then press it once more releasing after a second. You should see that the oil change light has been reset.

How do you reset the oil light on a 2015 Hyundai Elantra?

To reset the oil life warning or maintenance light in your 2015 hyundai elantra vehicle, turn the ignition key to the “on” position and depress the gas pedal slowly three times. Release and start your vehicle and oil light should indicate a reset.

How do I reset my Hyundai Santa Fe oil?

1. Turn the engine On.
2. Press the MODE button to navigate USER SETTINGS.
3. Then scroll down to SERVICE INTERVAL then press OK.
4. Enable the SERVICE INTERVAL then scroll down to RESET then press OK.
5. Then select YES then press OK to confirm the reset.

Where is the TPMS button on a 2017 Elantra?

The TPMS reset button is usually located under the steering wheel.

How do you reset the oil life on a 2013 Hyundai Sonata?

To perform an oil reset on the 2013 hyundai sonata you need to turn it on, but do not start the engine. Find the reset button on the console dash and hold it. When the light blinks and stops turn the vehicle off and wait 5 min. Your oil is now reset.

Article first time published on

How do you reset the oil light on a 2012 Hyundai Elantra?

To reset the oil level warning or maintenance light in your 2012 hyundai elantra vehicle, turn the ignition key to the “on” position and depress the gas pedal slowly three times. Release and start your vehicle and oil light should indicate a reset.

How do you reset the oil light on a 2012 Hyundai Veloster?

To reset the oil life on the 2012 hyundai veloster you will need to press the display button till it shifts to the odometer. Once you do that turn the power off. Now turn the power back on while you are holding down the trip meter reset button. This will cause the oil life to reset.

How do you reset the oil light on a 2011 Hyundai Sonata?

You’ll first need to put the key in the ignition and give the vehicle power. Now located the OK button on Your steering wheel and hold it down for a few seconds. After a few moments the light will disappear and You should get confirmation on Your instrument panel that it has been reset.

How do you reset the oil light on a 2007 Hyundai Sonata?

1. Start the engine.
2. Press and hold the “OK” button located on the top right of the steering wheel for about 3 seconds.

Where is the reset button on Hyundai Elantra?

First, locate the reset button which can be found on the left hand side of the vehicle, underneath the dashboard. Push and hold the button until the low tire pressure light flashes on and off three times.

How do you reset the oil light on a 2017 Hyundai Veloster?

1. Turn the ignition key to the “ON” position without starting the engine. …
2. Press the TRIP button repeatedly until you see ⚙️ (USER SETTINGS) …
3. Scroll down and select MAINTENANCE. …
4. Select ENGINE OIL.

What does the change oil light look like?

Indicator Light | Engine Oil Level Engine Oil Level Indicator– This dashboard warning light looks like a lamp with a drop of oil dripping from it. … Two, your vehicle is long overdue for an oil change. If this light illuminates, check your oil levels.

Where is the TPMS reset button on Hyundai Elantra 2017?

To reset the tire pressure monitor or tpms system in your 2017 hyundai elantra vehicle, turn the ignition key to the “on” position and depress the tpms button, usually located under the dash, until the tpms light blinks several times.

How do you reset the TPMS light on a Hyundai Elantra?

1. Put the key in the ignition and turn to the ‘ON’ position.
2. Do not start the car.
3. Press and hold the Tpms reset button until the tire pressure light blinks 3 times.
4. Release the Tpms button.
5. Start the car.
6. Wait 20 minutes for the sensor to reset.

Where is my TPMS reset button?

The TPMS reset button is usually located beneath the steering wheel. If you are unable to find it, refer to your vehicle’s owner’s manual. Inflate all tires to 3 PSI over their recommended amount, then deflate them completely. Be sure to include the spare tire, as it may have a sensor as well.

How do you reset the oil life on a 2013 Hyundai Tucson?

To reset the oil level warning or maintenance light in your 2013 hyundai tucson vehicle, turn the ignition key to the “on” position and depress the gas pedal slowly three times. Release and start your vehicle and the oil light should indicate a reset.

How do you reset the oil light on a 2010 Hyundai Sonata?

The first thing You will need to do is start the vehicle. Once it is on You can press and hold the OK button that is located on the steering wheel. Continue to hold this for about 5 seconds. Release the button then press and hold it one more time for about 1 second.

How do you reset the oil light on a 2014 Hyundai Sonata?

1. Close all doors, Gear to the park position.
2. Start the car engine.
3. Press the MODE button to scroll to USER SETTINGS, then scroll down to SERVICE INTERVAL, then press the OK button.

Where is the tpms reset button located on a 2013 hyundai elantra?

To reset the tpms on the 2013 hyundai elantra make sure the tire pressure is correct, then turn on the vehicle. Now hit the reset button that is to the right of the steering wheel and wait ten minutes. In some cases you may need to hold the button down till the light flashes.