We strongly recommend the use of the 2 component system: Rubio Monocoat Natural Oil Plus 2C – Parts A & B. The oil will cure in 7 days. The floor, fixture, or furniture is useable after 24 hours and can be cleaned with liquids within a week. There is much less chance of spotting, scuffing, etc.
How long does Rubio monocoat take to cure?
Liquid resistance in 48 hours. Full cure within 6 days.
How often do you have to apply Rubio monocoat?
A lifetime with proper maintenance. We would expect the first maintenance to be needed somewhere between 2 and 5 years depending on wear.
Can you use Rubio monocoat without accelerator?
Although Part A is available without the accelerator, we strongly recommend the use of the component system – Rubio Monocoat Natural Oil 2C Parts A & B – since the oil will cure in 7 days rather than 21 days, virtually eliminating spotting, scuffing, etc. during the cure period.How long does Rubio monocoat last once opened?
The product can be stored up to 12 months in dry conditions After mixing Oil Plus 2C can be used for a maximum of and in its original packaging. 6 hours (depending on the temperature and air humidity).
Can you put polyurethane over Rubio monocoat?
More research indicates poly can be applied over the Rubio in theory but their site isn’t overly positive about doing it.
Can I sand off Rubio monocoat?
Mix 1 part Rubio Soap to 100 parts water. Sanding should be done according to the NWFA guidelines. Proper sanding is critical for a professional end result. The surface needs to be evenly sanded, especially when applying colors.
Does Rubio monocoat yellow over time?
The oil can also produce a warm, amber or yellowish tint over time, which can change the look of the wood.Is Rubio monocoat waterproof?
Very wear-resistant. Water- and heat-resistant, ideal for kitchens and bathrooms. Very fast curing: 80% in 2 days. A short ‘dry’ maintenance period: after 5 days, the surface can be cleaned with water and soap.
Is Rubio monocoat epoxy?Rubio EasyPrimer Epoxy 2C – Epoxy is a high-quality water-based two-component epoxy primer. This primer is almost odourless and contains no VOC. In one layer, the primer can be used as a screed hardener for poor quality substrates.
Article first time published onHow much Rubio monocoat do I need?
The correct ratio for Monocoat is 3 parts A (oil) to 1 part B (accelerator). If you use the entire content of both cans, it’s already the correct 3:1 ratio. To determine how much oil you will need, use the following guidelines: Hardwoods: 350 mL will cover up to 175 sq ft.; 1.3L will cover up to 650 sq ft.
What is Rubio monocoat made of?
Rubio Monocoat and similar products are hard wax oils that penetrate the wood itself to provide protection instead of forming a barrier on top. Prior to the early 1980s, hardwood floors had to be waxed, which was a tedious and time-consuming process, hence the popularity of placing carpet on top of them.
Where is Rubio monocoat made?
Rubio Monocoat oil was developed in Izegem, in the heart of Belgium. Now, our products are being used all over the world, from Mexico, the United States over South Africa to China.
What is the most waterproof wood finish?
Oil-based varnish tops the durability charts in terms of water-resistance. The secret lies in its synthetic resins which have been bonded to drying oils and mixed with a thinner. (Faster to cure, varnishes that use urethane for their resin—often labeled polyurethane—dominate the modern market and are easier to find.)
Is Rubio monocoat a sealer?
Spread Rate:~ 72 ft²/LWarning:Do not allow to freeze
How do you increase sheen Rubio monocoat?
To increase the sheen on a surface finished with Oil Plus 2C, use Universal Maintenance Oil. This will increase the gloss level to about 8-12 units.
Is Rubio Monocoat a varnish?
Rubio Varnish 2C is a wood varnish based on a high quality polyurethane emulsion. The product is developed to give an excellent smooth satin finish to all wooden surfaces.
What kind of finish is Rubio Monocoat?
One of the newest additions to the wide range of finishes is Rubio Monocoat. It’s a hard-wax oil finish that goes on easily and, unlike standard polyurethane finish, actually permeates the wood itself rather than simply creating a protective barrier on top of it.
Does Rubio Monocoat block UV?
Rubio Monocoat’s exterior line combines their zero VOC hardwax oil technology with UV protection. The Hybrid Wood Protector exterior oil is long lasting against UV radiation and wood rot, keeping exterior wood looking fresh – still with just one coat!
Can you epoxy over Osmo?
As you apply the OSMO, it will penetrate wood but not the epoxy. … If you are using an epoxy finish over the complete wood surface then you should not use OSMO or any kind of high solid oil finish as it will not penetrate the epoxy to be absorbed into the wood.
Do you have to buff Rubio monocoat?
Don’t do anything you can’t finish within 15 minutes. Any longer than that and the finish becomes hard to remove. Once coated, buff the finish in using a white pad on a sander or manually with a white scotch bright pad. This step not only helps spread the finish but also helps drive it deeper into the wood.
How do you apply Rubio monocoat to stairs?
- Apply the oil.
- Allow 3-5 minutes for the oil to react.
- Remove ALL excess oil within 10-15 minutes.
Can you measure Rubio monocoat by weight?
You can measure by weight or volume. I prefer using a scale, but you can use measuring spoons, syringe, etc. Once the product is mixed. You have 6 hours to use the product.
