Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.
How do you set a 6x6 post in the ground?
- Dig the post hole, making it three times the width of the post and at a depth equal to 1/3 to 1⁄2 of the above-ground length of the post, plus 6″ (right). …
- Pour 6″ of gravel or crushed stone into the bottom of the hole. …
- Set the post in the hole.
How many bags of concrete do I need for a 6x6 post hole?
Depth50 Lb Bags18″-21″622″-25″726″-28″828″-30″9
How big of a hole do I need for a 4x6 post?
Dig an 18-inch diameter hole to the appropriate depth for your pole length. When completed, fill the hole with water and allow it time to drain away. This saturates the surrounding soil. Then add 6 to 8 inches of gravel to the bottom of the hole to ensure good drainage.How long will a treated 6x6 post last in the ground?
5 Answers. A PT post will last a long time in concrete, maybe 5 to 10 years in soil alone.
How deep should I bury a 20 foot post?
The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post.
How deep should a 6x6 post be in the ground?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole.
How much concrete do I need for a 4x6 post?
Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.How strong is a 6x6 post?
The load capacity of a 3-foot #2 grade 4×4 is 17,426 pounds, and a similar 6×6 is 20,834 pounds or 16% better. However, an 8-foot 4×4 supports 6468-pounds and 2339-pounds at 14-feet, while a 6×6 is 18032 and 10550-pounds respectively – or 64% and 78% more load capacity.
How deep should a 4x6 post be in the ground?For a six-foot-tall post, therefore, you would dig a hole two feet deep. The ideal diameter, meanwhile, should measure three times the width of the post. So, for a standard 4×4, the ideal hole would span twelve inches across.
Article first time published onHow many bags of concrete do I need for a 10x10 slab?
The thickness of your 10′ x 10′ slab will determine just how many bags you need. The average thickness of a 10′ x 10′ concrete slab for a shed is 4 inches thick. At 4″ thick, your 10 x 10 slab will take 56 bags of concrete that weigh 80 lbs.
Is 2 ft deep enough for fence post?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
How many bags of concrete do I need for a 8x10 slab?
Regarding this, “how many bags of concrete do I need for a 10×8 slab?”, at 4 inches thick, generally you will need approximately either 58 bags of 60lb or 45 bags of 80lb of premixed concrete for a 10×8 slab, at 5 inches thick slab, either 73 bags of 60lb or 56 bags of 80lb premixed concrete are required, while at 6 …
Is it OK to bury pressure treated lumber?
Pressure-Treated Wood Makes the Grade Pressure-treated wood in contact with the ground needs the most protection, and will rot in just a few years if you use the wrong grade. … If your wood will touch the ground or be buried, you should get the highest grade you can, up to .
Can pressure treated lumber be set in concrete?
YES. Any exterior concrete that is in contact with earth may wick moisture. Thus, it is required to place pressure treated wood directly against the concrete if one wishes next to build off that concrete with untreated wood.
Does water make wood rot?
As discussed in Build Green: Wood Can Last for Centuries, water is the main culprit in wood decay. Because of this, buildings should be designed to minimize wetting of wood or to maximize how quickly wood dries when wetted by rain.
How deep should a 16 foot post be in the ground?
In general, holes should be at least 3 feet deep for posts that extend 8 feet or more above ground level. Posts that extend 6 feet above ground level should have holes at least 2 1/2 feet deep.
What size post do I need for an 8 foot fence?
A common rule of thumb, is to dig the hole 3 times as large as the post, and to a depth of 1/3-1/2 of the post height above ground. so for a 8′ high fence, using 4×4 posts. dig the holes 12″ in diameter, to a depth of 2 1/2 – 4′. Of course, that’s assuming you’re setting the posts in concrete.
How deep should a 15 ft pole be buried?
Calculating the Depth of the Pole Poles are typically set into the ground: 10% of the overall height + 2 feet, except in questionable soil conditions.
How long does it take concrete to set in a post hole?
Typically, you can apply some weight to the posts after 4 hours, but it’s a good idea to wait at least 24 hours before resuming fence construction. Standard concrete mixes may take up to two hours to set and should cure for 24 to 48 hours before any forces are applied to the posts.
How much load can a 6x6 hold?
A 6×6 with 12′ span can support 2000 lbs. if you assume a conservative 1400psi bending stress. If you do a good job bonding the two members together, your double 6×6 can support more than 4,000 lbs.
How far apart can 6x6 posts be?
Post Anchors are made to support a maximum raililng height of 42 inches. The maximum spacing of 4×4 deck posts should be 6 feet on center, while the maximum spacing of 6×6 deck posts should be 8 feet on center.
Can a 6x6 be used as a beam?
The distance a 6×6 can span as a beam depends on the species of wood, grade, grain orientation, moisture content or seasoning, condition, and load. Southern Pine (SP) 6x6s will span 5” to 8” further than other common softwood species of the same grade.
How do you calculate concrete post holes?
Calculate Concrete Volume With the volume of the submerged post and the volume of the hole figured out, subtract the post volume from the hole volume, and you will have the volume of concrete needed for each hole. Simply multiply that amount times the number of posts to get a total quantity.
How big should the hole be for a deck post?
Dig, align, and finish the job Dig an 8″-diameter hole at least 6″ deeper than your area’s frost line for each 4×4 post, using a power auger, hand auger, or post-hole digger. A 6×6 post requires a 10″-diameter hole. Shovel a 6″ layer of gravel into the hole to provide drainage.
Can you mix quikrete in the hole?
Whether you are building a new fence, setting a mailbox or anchoring a basketball goal or play set, QUIKRETE® Fast-Setting Concrete is the ideal product for the job. With Fast-Setting Concrete there is no mixing or tools required – You simply pour the dry mix right from the bag into the hole, then add water.
How do I keep my post level while concrete dries?
You need to level it in two directions with a 4-foot level. After getting it straight in the first direction, hold one of the braces against the post and drive a single screw to connect the brace to the post. You can then level and brace the post in the other direction and begin filling the hole.
How much gravel goes in the bottom of a post hole?
You should put approximately 2″ to 4″ of gravel in the bottom of the hole making sure that the Post stands 6′ 4″ tall from the ground to the top of the post.
How strong is a 4x6 post?
2 and better (no loose or missing knotholes), then a 4×6 spanning 18′ will support about 105 lbs. loaded at the mid-span (slightly higher if it’s loaded at third points or further from the center point).
How much concrete do you need for a 12x12 slab?
Regarding this, “how many bags of concrete do I need for a 12×12 slab?”, at 4 inches thick, generally you will need approximately either 104 bags of 60lb or 80 bags of 80lb of premixed concrete for a 12×12 slab, at 5 inches thick slab, either 131 bags of 60lb or 100 bags of 80lb premixed concrete are required, while at …
How much area does an 80 lb bag of concrete cover?
80 lb bag of concrete cubic feet 80 lb bag of concrete yields 0.60 cubic feet which is approximately around 0.0222 cubic yards that will cover around 3.6 sq ft area up to standard depth of 2 inch excavation or backfills, and for 1 cubic feet of landfill you will need 1.66 bags of 80 lb concrete.
