How much does a new Mercruiser engine cost

ENGINE PACKAGE PRICES6.2L 350 Inboard DTS350-hp$16,7796.2L 350 Inboard DTS w/ECT350-hp$18,5958.2 HORIZON DTS w/ECT375-hp$21,8598.2 MAG H.O. DTS w/ECT425-hp$23,245

How much is a new marine engine?

So if you are one of these lucky ones, your engine replacement will cost around $5,000 if you either want something smaller or get a good deal. $10,000 is the top of the range estimate you will have to pay in case you are looking for more power, and/or fancy one of the bigger manufacturer brands.

Is a MerCruiser a Ford engine?

Mercruiser is the inboard marine engine division of Mercury Marine. … This engine displaces 3.7 liters and uses the head, connecting rods, pistons and flywheel from the Ford 460 engine.

How long do Mercruiser engines last?

The average marine gasoline engine runs for 1,500 hours before needing a major overhaul. The average marine diesel engine will run for more than three times that long and log an average 5,000 hours under the same conditions.

How many hours will a MerCruiser 5.7 last?

Thanks rasorinc. A friend says “1000 hours” as a general rule for the lifespan of a gas mercruiser inboard/sterndrive engine.

How much are boat motors per horsepower?

40hp – $6,671.6090hp – $10,263.00175hp – $15,968.0050hp – $7,958.00115hp – $11,565.20200hp – $19,258.8060hp – $8,572.20135hp – $13,552.50225hp – $20,913.6075hp – $9,640.50150hp – $14,813.60250hp – $21,814.50

What is a MerCruiser engine?

Mercury MerCruiser engines and drive systems are designed, tested, and built exclusively for the marine environment. That translates to best-in-class reliability, dependability, and long-lasting performance. Patented metallurgy technology.

Is it cheaper to rebuild or replace an engine?

A scheduled overhaul is almost always less expensive than a new engine. Rebuilding to repair is usually cheaper than buying a new engine, too. You may save up to half of the cost of a new engine by rebuilding. However, sometimes rebuilding is not a good option.

How much do ship engines cost?

The cost to ship an engine can vary based on size, weight, distance traveled, and several other factors. In general, the cost to ship most engines runs from $120 – $380.

Is 5.7 Mercruiser a good engine?

The 5.7L gasoline engine and Alpha or Bravo drive make up a solid, easy to maintain package suitable for a wide range of boats and boating life styles. … Both these features help reduce the amount of time your boat is out of the water during routine maintenance.

Article first time published on

Is a 5.7 Mercruiser engine?

Displacement350 C.I.D. (5736cc) / 5.7LBore x Stroke4.00″ x 3.48″ (101.60 x 88.39 mm)Main Bearing CapsCast iron GM232-MIgnitionNot IncludedFlywheel Diameter14″ (Ring Gear Towards Engine)

How long does a boat engine last?

The average marine gasoline engine runs for 1,500 hours before needing a major overhaul. The average marine diesel engine will run for more than three times that long and log an average 5,000 hours under the same conditions.

Are Mercury and MerCruiser the same?

Mercury Marine is a marine engine division of Brunswick Corporation. … It also produces the MerCruiser line of sterndrives and inboard motors.

Is a 3.0 MerCruiser a 4 cylinder?

Trophy’s standard setup for its 2052 Walkaround is the MerCruiser 3.0L. This is an overhead-valve inline Four of 3.0 liters and 135 hp, with two valves per cylinder and a 2-barrel carburetor. It runs happily on 87 octane gasoline.

Is 1000 hours a lot on a boat?

As a general rule, experts say that 1,500 hours on a boat is a lot. … Regardless of the hours, a boat that is used around 30-100 hours each year and serviced annually would be a great pick than a boat used less or serviced rarely. And it’s good to look for a boat that is used every year.

What is a 6.2 MerCruiser?

Mercury designed and built the 6.2L engine specifically for marine use rather than adapting and marinizing an automotive engine. … The MerCruiser 6.2L engine offers a runner scrolled intake manifold that optimizes airflow for higher torque, which translates into greater acceleration and improved boat performance.

Is a 4.3 MerCruiser a good engine?

The MerCruiser 4.3L MPI makes good economic sense in infrequently used sportscruisers. The exhaust note is nowhere near as satisfying as a V8 but under load the V6 noise ain’t half bad! Thanks to Lifestyle Marine, Toronto, NSW – phone (02) 4959 1444 – for supplying such well setup engines.

How many hours does an inboard engine last?

An inboard engine can run for an average of between 1500 to 2000 hours depending on the type. As with outboard engines, maintenance is crucial to prolonging the usefulness of an inboard motor. Ventilation is crucial for an inboard motor and should be continuously checked; otherwise overheating could cause a fire.

Does GM make MerCruiser engines?

And where there is MerCruiser, there is GM. … Introduced in 1955, the small-block engine has survived to this day with minimal refinements and design changes, and GM has produced — quite literally — millions of them.

Does Mercury Marine use GM engines?

Mercury Marine currently offers two high-performance engines for cars: the SB4 and QC4 crate engines. The SB4 is a 7.0-liter DOHC V8 based on a GM LS block and produces 750 horsepower. The larger QC4 displaces 9.0-liters and features a twin-turbocharger to make 1,350 hp.

How much does a 150 hp outboard cost?

$15,305.00. There’s a good reason why the legendary Yamaha F150 is the best-selling 150-horsepower four stroke of all time. Powerful, light, nimble and compact, boaters know that its proven reliability is unmatched for everything from pontoons to flats boats to deep-V hulls.

Why do outboards cost so much?

The boat engine (outboard) is expensive because they need to withstand the marine environment well, so all the parts used in making one are expensive stuff. And they don’t sell numerous motors all the time, so to stay in business, they need to make a profit, so the price of an outboard (boat motor) is high.

How much does a 200 horsepower outboard motor cost?

Expect today’s best 200-hp outboard motors to have some weight, especially 4-stroke models. After 2014, just about any maker’s 200-hp outboard V6 engine costs upward of $20,000 installed, depending on your gauge package, controls, installation, etc.

How long does it take to deliver an engine?

A: Typical shipping time usually takes between 7-14 business days, but could be a little longer due to unusual circumstances (such as weather, volume, etc…)

How much do engines cost?

New engines start at around $4,000 for a 4-cylinder, around $5,500 for a V6 and $7,000 for a V8. Prices increase from these figures based on complexity of the engine and the brand of car.

Why do container ships use 2 stroke engines?

Both 2 stroke and 4 stroke engines are widely available in the market but for a large ocean-going merchant vessel, a 2 stroke engine is more commonly used as the main engine and has a much better market. … A two-stroke engine can burn low-grade fuel oil and hence reduce the running cost of the ship.

Are Rebuilt engines as good as new?

In frequent circumstances, rebuilt engines can be superior to new car engines. This is because better parts can be utilized for the engine rebuild. Design changes in parts can even correct problems that existed with the original engine. As technology advances, parts are created and manufactured better than before.

How many miles will a rebuilt engine last?

You might not have to worry about the motor in your car for a long time if you do it right. If an engine rebuild is done properly, it can last over 100000 miles! And even just maintaining the vehicle and doing some of the work on its own will help keep that mileage up as well.

Are Rebuilt engines worth it?

Since the car is 20 years old it may not be worth much more than $2,000 even with a rebuilt engine and it may be worth about $500 as scrap. … In this case, a full engine rebuild is not only worth it but also could also increase the value of a car that does not suffer from other wear and tear problems.

How much gas does a 5.7 MerCruiser burn?

Select MerCruiser Test ModelHPFuel consumption WOTMerCruiser 5.0 MPI – 305 cid260 hp18.5 GPHMerCruiser 5.7 L – 350 cid260 hp21.0 GPHMerCruiser 5.7 MAG – 350 cid300 hp23.0 GPHMerCruiser 6.2 MAG – 377 cid320 hp24.5 GPH

How do you run a MerCruiser 5.7 out of water?

  1. Attach the outdrive muffs to a garden hose.
  2. Place the muffs over the vents in the outdrive. There are two vents on each side. Make sure the muffs are completely covering the vents.
  3. Turn the water source on. Allow the air pockets to work their way through the muffs.

You Might Also Like