On average, the cost to install a gas fireplace in a basement is $1,705 to $4,291.
Can you put a ventless gas fireplace in a basement?
States including California and Massachusetts have banned the installation of ventless fireplaces, and the devices are not permitted in HUD housing. Individual municipalities may also ban them, so check with your local building authority before you purchase a ventless fireplace.
Do you need ventilation for a gas fireplace?
Not all gas fireplaces need venting. Both natural vent and direct vent gas fireplaces need venting, which exhaust air up a chimney and through the wall to the outside respectively. Ventless gas fireplaces don’t need venting.
Can you put a gas fireplace anywhere?
Their inner and outer shell construction allows for maximum heat insulation.” As long as you have a natural gas connection or propane availability, you can install a gas fireplace almost anywhere in your home—under a window, in either an outside or inside wall, at wainscot or floor level, in a corner or even in the …Do I need a chimney for a gas fireplace?
Ventless fireplaces fueled by gas or propane rely on indoor air for combustion, and they exhaust a low level of their combustion gases into the room in which they’re located. A chimney or flue isn’t necessary. … In fact, ventless fireplaces generally are just for aesthetics and supplemental space heating.
Can you install a direct vent fireplace in a basement?
Types of Fireplaces to Put in Basements. … If you choose a gas or wood option, the safest and most efficient option for the fireplace would be a direct vent system. Direct vent fireplaces utilize rigid or flexible pipes placed into your walls to connect the fresh outside air with your fireplace.
Does a gas fireplace add value to a home?
Return on Investment A homeowner can often recover over 100 percent of the expenses associated with adding a fireplace upon selling their home. According to the National Association of Real Estate Appraisers, adding a fireplace to home can increase the resale value of the home by as much as 6-12 percent.
Why do old houses have fireplaces in the basement?
Basement hearths in early America were frequently associated with inns and taverns. They could also be found in houses of the wealthy that had domestic service. Most often, if a basement contained a fireplace, it was used as a kitchen for food preparation and cooking.Are unvented gas fireplaces safe?
Are Ventless Gas Fireplaces Safe? Ventless gas fireplaces emit dangerous and noxious gasses into the room they are operating. … Ventless fireplaces produce small amounts of nitrous dioxide and carbon monoxide which can be deadly in large doses.
How many hours can you run a gas fireplace?In short, you really shouldn’t let a gas fireplace on for too long—specifically more than three hours at a time.
Article first time published onCan you install a gas fireplace after a house is built?
Be assured that it is possible to add a fireplace to an existing home. You’ll just need to determine which one will work best. … Fireplaces generally fall into one of three categories: gas, masonry, and zero-clearance (also known as prefabricated or manufactured fireplaces).
Can you vent gas fireplace into chimney?
A gas stove can be vented through an existing chimney, whether it is a manufactured or masonry chimney. To ensure proper venting, however, a liner must first be installed in the chimney. … In a B-vent system, a substantial amount of heat is lost through the chimney.
What does a vented gas fireplace look like?
But only vented systems can really replicate the look of real wood flames. A vented fireplace has attractive yellow and orange flames that lick upward around the sides of the ceramic logs. An unvented fireplace, by contrast, has much less striking flames. These flames tend to be smaller and bluer.
Where does a gas fireplace vent?
Most direct vent gas fireplaces are vented to the outdoors horizontally (through the wall), but they can also be routed vertically (through the roof).
What is difference between gas fireplace and gas insert?
A gas insert is installed within an existing masonry, wood burning fireplace. A gas insert is smaller than a gas fireplace to allow it to fit inside of the opening of an existing wood burning fireplace. … A gas insert can get much hotter on the outside (no, not that hot) than a gas fireplace.
Can I burn wood in a gas fireplace?
The answer to “Can you burn wood in a gas fireplace?” is a resounding NO! That is, if your setup is a true gas-only fireplace. In this type of installation, burning wood is extremely hazardous. With other kinds of gas fireplaces, you might be able to burn wood, but only under the right conditions.
Do gas fireplaces need electricity?
Gas fireplaces are a form of fireplace that traditionally didn’t typically need a source of electricity in order to work. … Turning this control through the spark ignition position to the pilot light position allows the pilot light to be started, all without the need for a source of electricity from the house.
How much does it cost to install a gas fireplace from scratch?
Average Cost to Install a FireplaceNational average cost$4,000Average range$2,650-$5,800Minimum Cost$600Maximum Cost$10,000
Is a gas fireplace cost efficient?
Gas fireplace efficiency includes easy maintenance, so you have no ashes or soot in the chimney with a gas fireplace. Natural gas is a fairly inexpensive form of energy, so a gas fireplace is inexpensive to run. Gas fireplaces cost 17-19 cents an hour to run, or about $60 annually, Electric Fireplaces Direct says.
What type of fireplace adds the most value?
Any type of fireplace will add more appeal and instant value to your house. Generally speaking, electric units will be your least cost option. Gas models next, followed by wood burning fireplaces. Both equipment and installation costs with gas and wood fireplaces are more than an electric model.
Do gas fireplaces give off heat?
A gas fireplace only produces heat when it’s on and the flames are burning, meaning that a gas fireplace can’t produce heat for your home when it has been turned off. Gas fireplaces aren’t always used primarily for heating purposes.
How many BTUs do I need for a basement fireplace?
ModelBTUsSpace it will HeatCrave 3617,500 – 30,000600 – 900 square feetCrave 4821,000 – 40,000800 – 1,300 square feetCrave 6026,000 – 50,0001,300 – 2,100 square feetCrave 7230,000 – 58,0001,500 – 2,400 square feet
Can an electric fireplace heat a basement?
Luckily, the answer to that question is yes, and using an electric fireplace in a basement is considered very safe. Not only that, but many homeowners have done just that. Furthermore, they are considered to be a highly effective and energy efficient way to heat your basement during the winter.
Can you get carbon monoxide poisoning from a gas fireplace?
Yes, gas fireplaces are one potential cause of carbon monoxide poisoning. … An improperly maintained or ventilated gas fireplace can create incomplete combustion, creating carbon monoxide, and causing this toxic gas to linger—putting those inside at risk of carbon monoxide poisoning.
How can you tell the difference between vented and unvented gas logs?
Follow the gas line from beneath the logs to where it disappears in the wall or floor. If the gas is merely contained by a simple gas line, then the logs are vent free. If there is a small cylinder attached to the gas line, then the logs are vent-free.
Are fumes from gas fireplace harmful?
Gas fireplaces are generally considered cleaner than traditional wood-burning fireplaces, but they can also pollute indoor air quality if not properly vented. Toxic gasses emitted include deadly carbon monoxide and nitrogen dioxide — a gas particularly harmful to those with asthma.
How do basements get heated upstairs?
Use Fans. Using fans to move the heat around will allow you to heat the entire upstairs, or place fans that move the wood stove heat to only one room. A fan mounted high in a doorway or on the wall in the same room as the stove will blow hot air to where you need it to go.
How did people heat their homes in the old days?
Stoves that could burn either wood or coal—the type being pushed was Anthracite, or “hard” coal—became popular. Iron stoves were not new technology. While English settlers brought fireplaces, German settlers had iron stoves that did a good job of heating a space. … Coal became mainstream in post-Civil War America.
Can I put a wood stove in my basement?
A heat-efficient wood stove can be installed in a basement as long as some precautions are considered. Wood stoves are one way home and property owners keep a house toasty during chillier winter months.
Is it cheaper to run gas fireplace or central heat?
A modern furnace is more efficient in turning gas into heat than a gas fireplace. This means that although a furnace costs more to run per hour than a gas fireplace, it turns more of that energy into heat and can warm a whole house rather than a single room.
Can gas fireplaces explode?
Although convenient, these home gas fireplaces pose significant risk of explosions and house fires if they are improperly installed or maintained. Gas Fireplace leaks can result in carbon monoxide poisoning, but can also result in explosions that can level an entire neighborhood block.
