How much horsepower does a 350 rocket have

350. Produced from 1968–1980, the Rocket 350 was entirely different from the other GM divisions’ 350s. It used a very oversquare 4.057 in (103.0 mm) bore and Oldsmobile small-block standard 3.385 in (86.0 mm) stroke for 350 cu in (5.7 L). Output ranged from 160-325 hp (119-242 kW).

Is the 350 rocket a good engine?

GM often mixed and matched its 350s with different make and model cars. However, other than the Cadillac Seville, the Rocket 350 only powered Olds models. Although it was generally a dependable engine, the Rocket 350 suffered from a weak oil system and troublesome valve train.

How much does it cost to rebuild a 350 rocket?

$600 to $3,500 … depending upon how involved you want to get with the thing. Generally, for a “good” rebuild that doesn’t really get beyond ‘mild 350’ standards, you’re looking at about $1,600-2,500 depending upon location.

How much horsepower does a 455 rocket have?

Factory horsepower ratings ranged from 310 all the way up to 400 ponies, with 500 lb-ft the most common torque figure. The Cutlass would benefit from the hottest versions of the 455, starting right out of the gate with 1968’s Hurst/Olds, a 390hp special model with a more aggressive camshaft and carb setup.

How much horsepower does a Oldsmobile 307 have?

From 1980 until 1990, Oldsmobile made a 307-cubic-inch, eight-cylinder engine that was capable of producing between 140 and 180 horsepower. The 307 went into nearly all ’80’s Oldmobiles, including the Delta 88s, Cutlass/442, 98s and Toronados.

Did Ford ever make a 350 engine?

Ford set out to develop an engine with exceptionally low weight, high power and quick throttle response for the latest version of the GT 350, a model that goes back to the high-performance Mustangs legendary racer Carroll Shelby developed with Ford in the 1960s.

How much horsepower does a 1969 Cutlass have?

V 8Displacement :5735 cc | 350.0 cu in. | 5.7 L.Power :310 HP (228.16 KW) @ 4800 RPMBore :4.1 in | 104 mm.Stroke :3.4 in | 86 mm.

How much horsepower does a 426 Hemi really have?

MoPar 426 Hemi The 426 street Hemi was rated at 425 horsepower from the factory. This Chrysler dyno sheet from decades ago and this close-to-stock dyno session of a new 426 Hemi both put the gross horsepower rating at about 470 horsepower without full exhausts and other engine-driven accessories.

How much horsepower does a 4-4-2 have?

Oldsmobile 442 I 6.6 V8 Coupe Engine Technical DataCompression Ratio :10.25Maximum power – Output – Horsepower :355 PS or 350 bhp or 261 kW @ 5000 rpmMaximum torque :597.0 Nm or 440 lb.ft @ 5000 rpmDrive wheels – Traction – Drivetrain :RWD

Is a 350 rocket a big block?

The Oldsmobile V8, also referred to as the Rocket, is series of engines that was produced by Oldsmobile from 1949 to 1990. … The 260 cu in (4.3 l), 307 cu in (5.0 l), 330 cu in (5.4 l), 350 cu in (5.7 l) and 403 cu in (6.6 l) engines are commonly called small-blocks.

Article first time published on

How much horsepower does a 350 big block have?

a typical 350 Chevy can make upwards of 350 – 375 HP before you exceed the reliability of the components. For a big block with the same stock components it can make in the area of about 400 to 475 or so HP and handle upwards of about 500 HP before you exceed the reliability of the stock cast pistons.

How much horsepower does a Oldsmobile 403 have?

ENGINEOLDSMOBILE 403BORE4.351 INCHES (110.5 MM)STROKE3.385 INCHES (86.0 MM)HORSEPOWER185 HP (138 kW)TORQUE320 LB-FT (430 N-m)

What does 442 stand for in the Oldsmobile 442?

Confusingly, the 442 (pronounced “four four two”) did not have a 442-cubic-inch engine. Instead, the numerals indicated that the car had a four-barrel carburetor (atop a 330-cubic-inch V-8), a four-speed manual, and dual exhausts.

What is the smallest V8 engine?

In 1975, the 2.0 L (122 cu in) engine in the Ferrari 208 GT4 became the smallest production V8 engine ever produced.

How much does a 1986 Cutlass weight?

Engine Location :FrontBody / Chassis :Separate body and frameProduction Years for Series :1982 – 1997Price :$10,700-$11,550Weight :3125 lbs | 1417.476 kg

How much horsepower does a 1969 Oldsmobile 442 have?

How much HP does a 442 have? While the 1968 model was rated at 380 HP, 1969 442 could deliver 380 HP through the 330-cubic inch V8 engine.

What is the 442 package?

The package was dubbed 4-4-2 based on its combination of four-barrel carburetor, four-speed manual transmission, and dual exhausts.

What is a 1969 Oldsmobile 442 worth?

BodystylesMedian SaleHoliday Hardtop$28,550Hurst/Olds$71,250Sports Coupe$42,000

How much horsepower does a Chevy 350 small block have?

The Chevy 350 engine is a 350 cubic inch (5.7-liter) small block V8 with a 4.00 and 3.48 inch bore and stroke. Depending on the year, make and model of a car, horsepower ranges from approximately 145 to more than 370.

How much HP does a 302 V8 have?

Ford 302 H.O.Cooling systemWater-cooledOutputPower output290 hp (216 kW) @ 5200 rpmSpecific power59.2 hp (44.1 kW)/Liter

How much horsepower does a 5.0 liter 302 engine have?

Engine:Ford 302 Windsor V-8 (5.0L)Engine Weight:~ 450 lbsEngine Oil Capacity:6 qts w/ filterPeak Horsepower:130 hp – 205 hp (see table below)Peak Torque:233 lb-ft – 270 lb-ft

What does w30 mean on a 442?

This Oldsmobile 442 is equipped with the W-30 option package, which added the “Select-Fit” engine components, a W25 fiberglass hood which provides outside air induction through functional air scoops, a low-restriction air cleaner, a Winters aluminum intake manifold as well as a longer-duration, higher-lift cam.

What does 442 mean in football?

For example, 4–4–2 means four defenders, four midfielders, and two forwards. Traditionally, those within the same category (for example the four midfielders in a 4–4–2) would generally play as a fairly flat line across the pitch, with those out wide often playing in a slightly more advanced position.

What is a 442 in soccer?

This week we’re starting with a guide to a formation, that English classic, the 4-4-2. It’s characterised by four defenders (two centre-backs in the middle, full-backs on the left and right sides), four midfielders (two central midfielders, two wingers on the left and right sides) and two strikers.

What muscle car has the highest horsepower in 1970?

1970 was arguably the pinnacle of the first muscle car era. For Chevy fans, the peak of performance is a Chevelle with the LS-6 454 V8. Check one box on the order from, and you could get an estimated 450 horsepower in a spankin’ new box body that defined the muscle car era.

How much horsepower does a Ford 428 have?

With the Muscle Car horsepower race escalating for the 1968 season, Ford Motor Company introduced its all-new 428-cubic inch Cobra Jet engine. With 335 hp, the potent 428 CJ offered a huge leap in power over the smaller 390-cube V8, which was the top Mustang engine for 1967.

How much horsepower did the Boss 429 actually have?

The Boss 429 engine was a monstrous big-block, forcing changes to the front shock towers and bracing. Rated at a conservative 375 hp and 450-lb. ft. of torque, its installation in the Mustang created the ultimate super pony, albeit in low numbers.

How much does a 350 rocket weigh?

Olds 350 is about 560 lbs, 455 is about 620 lbs.

What's the difference between a 350 and a 350 Vortec?

The regular 350 head uses a 90 degree bolt angle while the Vortec uses a 72 degree bolt angle. When the head is bolted to the engine, all the attachment bolts point straight up, as experienced mechanics know.

When did Oldsmobile come out with a V8 engine?

The very popularity of Oldsmobile’s cars created a problem for the division in the late 1970s, however. At that time, each General Motors division produced its own V8 engines, and in 1977, Oldsmobile, Chevrolet, Pontiac, and Buick each produced a unique 350-cubic-inch displacement V8.