How thick can you lay ardex feather finish

MIXING/INSTALLATION ARDEX FEATHER FINISH is easily applied with a steel trowel and can be used to form a true feather edge up to 3mm in thickness. ARDEX FEATHER FINISH is designed specifically for very thin smoothing applications typically 1mm thick or less, but may be used up to 3mm thick in one application.

How thick can you apply ardex?

ARDEX K 521™ is a pourable, polishable, self-leveling topping for fast-track resurfacing of indoor concrete. ARDEX K 521 can be installed from a minimum thickness of 3/8″ (9 mm) up to a maximum thickness of 2″ (5 cm). Use ARDEX K 521 to provide a polished, “aggregate-exposed” surface.

How many square feet does a bag of Ardex Feather Finish cover?

Coverage: 16.7 sq. ft. per bag at 1/4”, 33.3 sq. ft.

Is feather finish waterproof?

ARDEX FEATHER FINISH – Laminate Floors and Waterproof Flooring-Carpet-Wood-Tile-Parquet-Soundproofing-Vinyl-Porcelain in Miami Florida Talula Floors.

How thick can feather finish be?

Thickness of Application ARDEX FEATHER FINISH can be installed from a true featheredge up to 1/2 in. (12.7 mm) over large areas. It can also be installed up to any thickness in small, well-defined areas, such as thresholds and birdbaths, as well as for height transitions.

Can you paint over ardex feather finish?

Amazon Music Stream millions of songsAmazon Advertising Find, attract, and engage customersAmazon Warehouse Great Deals on Quality Used ProductsWhole Foods Market America’s Healthiest Grocery StoreNeighbors App Real-Time Crime & Safety Alerts

Is Henry feather finish the same as ardex?

The Henry Feather Finish is the same stuff as is in this Ardex bag. They are made by the exact same company -just different packaging. I found the Henry at Home Depot. You just have to search because different territories in the US carry different products and brands.

How thick can self-leveling be?

QUIKRETE® Fast-Setting Self-Leveling Floor Resurfacer (No. 1249-51) can be installed from 1-1/2 inch (38 mm) thick to a feather edge, although a ¼ inch (6.3 mm) minimum thickness is required for heavy traffic areas.

How thick can you pour self level?

How thick you can pour self-leveling concrete depends on the specific product used. But standard thicknesses are between ⅛ inch and 1 inch. However, it is possible to get options that pour as thin as 1/25 inch and as thick as 5 inches.

What is the PSI of ardex feather finish?

Using advanced Portland cement chemistry with a self-drying matrix, ARDEX SD-P is ideal for patching and reaches a compressive strength of 4200 psi. It was developed to reduce curing time on pressed-for-time jobs.

Article first time published on

Does ardex feather finish expire?

The shelf life of ARDEX PC-T and ARDEX SD-T is extended to 9 months (previously 6 months) for unopened, properly stored bags. We are writing to clarify our recommendations for the installation of ARDEX products with consideration to the new OSHA Standard on crystalline silica.

Can ardex be used exterior?

ARDEX K 301™ Exterior Self-Leveling Concrete Topping is a self-leveling topping and underlayment for fast-track resurfacing and smoothing for exterior and interior applications over concrete and approved, properly prepared, non-porous surfaces, including terrazzo, epoxy coatings and ceramic and quarry tile – on, above …

What is Floor feathering?

Feather finish irregular floors. Designed to smooth grooves, joins, gaps and grout joint lines over concrete, terrazzo and ceramic tiles. … Feather Floor is easily applied to any prepared surface using a steel trowel. Apply sufficient pressure to fill all defects and to feather the product into the subfloor surface.

Can you feather finish over tile?

One Million Layers This is where using feather finish concrete over tile counters differs from applying it over a smooth surface. … You want to make sure everything is very dry so it adheres well to the counter and doesn’t crack.

How do you use Henry 549?

HENRY 549 FeatherFinishTM can be applied to any prepared surface using a steel trowel. Apply sufficient pressure to fill all defects and to featheredge the product into the subfloor surface. It is not necessary to leave a certain minimum thickness of product on the substrate.

Is ardex and Henry the same?

HENRY, a division of ARDEX Americas, is a manufacturer of adhesives for all types of flooring installations.

Does feather finish concrete?

One thing that’s important to know about the Feather Finish concrete countertops is that it is not as hard as regular concrete. … My Feather Finish concrete is applied in thin layers on top of laminate counters, so there’s a bit of a durable surface underneath the concrete.

What is feather finish used for?

ARDEX FEATHER FINISH® is an underlayment formulated from a blend of Portland cement and other hydraulic cements that provides a smooth, permanent finish for a variety of substrates prior to the installation of today’s demanding floor coverings, including sheet vinyl and VCT (vinyl composition tile).

Can you epoxy over ardex?

ARDEX K 15® is the original and the most specified self-leveler in North America. Install over: interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems, wood, metal and non-water soluble adhesive residue on concrete; can be installed over concrete treated with certain curing compounds.

How thick should self-leveling compound be?

The minimum thickness advised for many levelling compounds is only 2 or 3 millimetres (some require a minimum of 5mm). And whilst even a millimetre less than the prescribed minimum might not seem that significant, it can cause problems.

How thick can Gypcrete be poured?

Gypsum Concrete continues to be one of the most versatile and cost effective floor levelers that we offer. It can be installed from 1/4”-4” thick in a single lift, it dries faster than concrete, it finishes flatter than concrete and it costs less than cement based self leveling products.

How many square feet does a 50 lb bag of self leveler cover?

Coverage: One 50 Lb. bag will cover approximately 40 Sq. Ft. at 1/8 In.

What is minimum screed thickness?

The minimum thickness of an unbonded traditional screed will usually be around 50mm. An unbonded Cemfloor Screed would usually require a minimum of 30mm thickness. Floating screed: This is where the screed is overlaid on something that is compressible and not rigid.

Do I need to prime floor before self Levelling?

Wood floors need to be primed before covering them with self leveler. The floor will be covered with water-saturated leveler, which will cause the wood to swell. It will shrink back down when it dries, which could cause cracks in the underlayment and tiles above. The primer prevents the wood from absorbing water.

Do I need primer for self leveling compound?

Primer. All of the self leveling cements require that you buy bottles of primer as well to coat your floor with prior to pouring the concrete. It is a rule but it’s only applicable if you’re pouring cement onto cement. If you have a non porous surface as your base primer isn’t crucial.

Can you use ardex feather finish on OSB?

2. Saw Cuts, Dormant Control Joints and Dormant Cracks – fill all dormant control joints and dormant cracks with ARDEX ARDIFIX™ Low Viscosity Rigid Polyurethane Crack & Joint Repair or ARDEX FEATHER FINISH® Self-Drying, Cement-Based Finish Underlayment as recommended by the manufacturer. OSB equivalent.

Can you use ardex on wood?

ARDEX TL WOOD™ is a self-leveling underlayment used to smooth uneven, structurally sound plywood, OSB, and strip wood flooring without the use of metal lath. … Additionally, ARDEX TL WOOD can be used over wood and gypsum floors that employ the use of hydronic or electric in-floor heating systems.

What is ardex waterproofing?

ARDEX S 1-K™ One-Component Waterproofing and Crack Isolation Membrane is an easy-to-use, single-component, load-bearing waterproofing compound that produces a flexible, positive-side waterproof coating for all common interior building substrates requiring protection from topside water exposure that could damage tile …

Can Level Quick be used outdoors?

Level Quick Rapid Setting Self-Leveling Underlayment is a bagged mix used to create a level surface for installing ceramic tile, stone, carpet and other types of flooring. It is approved for both indoor and outdoor use and can be applied on top of concrete and plywood subfloors.