Wash needlesticks and cuts with soap and water.Flush splashes to nose, mouth, or skin with water.Irrigate eyes with clean water, saline, or sterile wash.Report all exposures promptly to ensure that you receive appropriate followup care.
What is the procedure for after exposure to blood or other body substances?
- remove contaminated clothing.
- if blood or body fluids get on the skin, irrespective of whether there are cuts or abrasions, wash well with soap and water.
- if the eyes are splashed, rinse the area gently but thoroughly with water while the eyes are open.
What is the first step after an exposure incident?
When a worker experiences an exposure incident, the employer must make immediate confidential medical evaluation and follow-up available to the worker.
What is an exposure incident and what do steps do you take if it happens to you?
If you are exposed, take the following steps immediately: Clean the contaminated area thoroughly with soap and water. Wash needlestick injuries, cuts, and exposed skin with soap and water. Flush out any splashes of blood and OPIM to the mouth and nose with water.What is an exposure control plan?
An Exposure Control Plan is meant to be a “living” document, used as a source of information for answering bloodborne pathogen-related questions and to help ensure exposure control activities are in place.
What is an exposure event?
An exposure incident is a situation when the eye, mouth, mucous membranes, or even non-intact skin comes into contact with blood or other potentially infectious material.
Which of the following steps are correct in the management of a small blood or body fluid spill?
Cleaning spots or small spills Spots or drops of blood or other small spills (up to 10 cm) can easily be managed by wiping the area immediately with paper towels, and then cleaning with warm water and detergent, followed by rinsing and drying the area. Dry the area, as wet areas attract contaminants.
What is an exposure incident Chapter 5?
What is an exposure incident? An exposure incident is contact with no intact (broken) skin, blood, body fluid, or other potentially infectious materials that is the result of the performance of an employee’s duties.What is an exposure incident examples?
Examples of exposure incidents include needle sticks, splash/spatter to the mucous membranes of the face, and any other incident that involves contact between blood or potentially infectious materials and non-intact skin (cuts, scratches, chapped skin, etc.).
What is the procedure for handling an exposure incident in a salon?- Stop service and put on gloves.
- Stop bleeding.
- Clean injured area.
- Apply antiseptic and/or liquid/spray styptic.
- Bandage cut.
- Clean and then disinfect workstation.
- Discard contaminated objects.
- Disinfect all tools in EPA-registered disinfectant.
What is the purpose of an exposure incident report?
These facts are needed for follow-up and prevention of similar exposures to others. Reporting is important because part of the follow-up includes testing the blood of the individual source to determine HBV and HIV infectivity, if this is unknown and if permission for testing can be obtained.
What are the 5 steps of an exposure control plan?
- Step 1: Required Personal Protective Equipment. …
- Step 2: Equipment. …
- Step 3: Decontamination Procedures. …
- Step 4: Disposal. …
- Step 5: Decontaminate Re-useable Equipment. …
- Step 6: Wash Your Hands.
What are 3 main parts of an exposure control plan?
- Statement of purpose.
- Responsibilities of the owner, prime, employer, designated resources (i.e. H&S Manager), supervisors, and workers.
- Health hazards and risk categories for each product in your worksite.
- Written work procedures and practices.
What is the first step in the exposure control plan?
1. Exposure determination – The plan should include the names, department and task of each employee where the potential for occupation exposure to bodily fluids exists.
What is the 3 step procedure for cleaning up a blood spill?
Procedure for Spills on Hard, non-porous surfaces: Cleanup and decontamination is a 3 step process requiring proper personal protection equipment, removal of gross filth (visible material), followed by disinfection of surface.
What are the steps in disinfecting and decontamination of spills involved in blood and other biohazardous materials?
Put on disposable gloves. Wipe up the spill as much as possible with paper towel or other absorbent material. Gently pour bleach solution – 1 part bleach to 9 parts water – onto all contaminated areas. Let bleach solution remain on contaminated area for 20 minutes and then wipe up remaining bleach solution.
What occupational exposure means?
Occupational Exposure means reasonably anticipated skin, eye, mucous membrane, or parenteral contact with blood or other potentially infectious materials that may result from the performance of an employee’s duties.
Which of the following is included in an exposure control plan?
A description of the device being used (including type and brand) Protective equipment or clothing that was used at the time of the exposure incident (gloves, eye shields, etc.) Location of the incident (O.R., E.R., patient room, etc.) Procedure being performed when the incident occurred.
What is an exposure to Covid?
Individual who has had close contact (within 6 feet for a total of 15 minutes or more) Exposure to. Person with COVID-19 who has symptoms (in the period from 2 days before symptom onset until they meet criteria for discontinuing home isolation; can be laboratory-confirmed or a clinically compatible illness)
What do you do first when a blood exposure incident occurs cosmetology?
1. Clean all contaminated surfaces with suitable cleaner. 2. Apply disinfectant to the surfaces.
What is an exposure incident in cosmetology?
What is an exposure incident? contact with non intact or broken skin, blood, bodily fluid or other potentially infectious materials that is the result of the performance of an employees duties. What is the procedure for handling an exposure incident in the salon. Stop service.
What are four modes of pathogen transmission?
The modes (means) of transmission are: Contact (direct and/or indirect), Droplet, Airborne, Vector and Common Vehicle. The portal of entry is the means by which the infectious microorganisms gains access into the new host.
What are the levels of disinfection?
There are three levels of disinfection: high, intermediate, and low. The high-level disinfection (HLD) process kills all vegetative microorganisms, mycobacteria, lipid and nonlipid viruses, fungal spores, and some bacterial spores.
What are the 7 steps to handling an exposure incident?
- STOP service.
- GLOVE hands of licensee.
- CLEAN injured area as appropriate.
- APPLY antiseptic and/or liquid or spray styptic as appropriate (see NOTE).
- COVER the injury with the appropriate dressing to prevent further blood exposure.
- BAG and dispose of all contaminated objects. …
- RETURN to service.
What are standard precautions in cosmetology?
Precautions and Safety Standards They include hand washing, wearing gloves, and proper handling and disposal of sharp instruments and items that have contaminated by blood or other body fluids.
Which should you do when handling disinfectants?
Wear rubber gloves and eye protection when using toxic disinfectants. Open windows and turn on exhaust fans to dissipate the toxic fumes. Precautions must be followed to minimize exposure to these harmful chemicals. Keep these products away from children, and open windows or turn on exhaust fans when using.
What does the exposure control plan consist of quizlet?
This is provided to eliminate or minimize occupational exposure to bloodborne pathogens. Must describe: Potential risks in the Lab, Measures taken to protect personnel, & Procedures to follow of Lab personnel are exposed to bloodborne pathogens.
Which four elements are covered under the UMB BBP exposure control plan?
Therefore, to minimize the risk of occupational exposure to potentially contaminated blood and body fluids a combination of education, personal protective equipment (PPE), vaccinations, engineering controls, and application of recommended work practices will be used.
What are the key elements of CBP's TB exposure control program?
7. Tuberculosis Control Program Elements. The CBP Tuberculosis Control Program consists of periodic screening, prevention of tuberculosis disease among tuberculin reactors, management of tuberculosis disease, and tuberculosis contact investigations.
Where is the exposure control plan located?
- EXPOSURE DETERMINATION. …
- IMPLEMENTATION METHODS AND CONTROLS. …
- HEPATITIS B VACCINE. …
- POST EXPOSURE EVALUATION AND FOLLOW UP. …
- COMMUNICATION ABOUT HAZARDS TO EMPLOYEES.
- RECORDKEEPING. …
- ANNUAL REVIEW. …
- The exposure control plan is located in each work center.
What are the primary ways exposure to bloodborne pathogens occur in an occupational setting?
Occupational exposures can occur through needlesticks or cuts from other sharp instruments contaminated with an infected patient’s blood (including blood contaminated saliva) or through contact of the eye, nose, mouth, or skin with a patient’s blood.
