Contact with live wires resulting in electric shock and burns,Fires due to faulty wiring,Exposed electrical parts,Ignition of fires or explosions due to electrical contact with potentially flammable or explosive materials,Inadequate wiring,
What are common electrical hazards?
Damaged Tools and Equipment– Exposure to damaged electrical tools and equipment can be a risk of electrocution. … Do not attempt to fix or repair anything unless you are qualified to do so. Thoroughly check for cracks, cuts, and abrasions on cables, wires, and cords.
What are the 5 electrical hazards?
- Poor Wiring and Defective Electric Wires: …
- Outlets Close to Water. …
- Lightbulbs. …
- Covered Electrical Cords and Wires. …
- Pouring Water on Electrical Fires. …
- Inquisitive Young Children. …
- Wet Hands. …
- Extension Cords.
What are the 3 main hazards of electricity?
- electric shock and burns from contact with live parts.
- injury from exposure to arcing, fire from faulty electrical equipment or installations.
What are the 8 electrical hazards?
- Arc Faults. …
- Ground Faults. …
- Old Wiring. …
- Light Bulbs with the Wrong Wattage. …
- Overloaded Outlets. …
- Unprotected Outlets. …
- Faulty Appliances and Cords. …
- Broken Smoke Alarms.
What are the risks and hazards of electrical wiring?
- Overhead Power Lines. They carry high voltages and can cause severe burns to the workers. …
- Exposed Electrical Parts. …
- Improper Grounding. …
- Damaged Insulation. …
- Elimination. …
- Substitution. …
- Engineered Controls. …
- Administrative Controls.
What are 5 electrical safety tips?
- Never put fingers or other objects in an outlet.
- Keep metal objects out of toasters.
- Never use anything with a cord or plug around water.
- Never pull a plug out by its cord.
- Stay away from substations and power lines.
- Don’t climb on power poles.
- Never fly kites near power lines.
What are electrical hazards in the workplace?
Hazards Associated With Electricity Electricity is widely recognized as a serious workplace hazard, exposing employees to electric shock, burns, fires, and explosions.What are 10 electrical safety tips?
- Always Cut the Power. …
- Have the Appropriate Fire Extinguisher on Hand. …
- Use More Than One Outlet. …
- Feel Your Outlets. …
- Child-Proof Your Outlets. …
- Investigate Flickering Lights. …
- Install Arc-Fault Circuit-Interrupters. …
- Don’t Use Extension Cords Long-Term.
- All electrical equipment should be in proper working condition. …
- Main Power Off. …
- Warm & Cold Power Outlets. …
- Fire Extinguisher. …
- Ground Older Appliances. …
- Expert Intervention. …
- Rooms with running water need to be equipped with Ground Fault Circuit Interrupters.
What is basic electrical safety?
Electrical safety refers to any safety precautions taken against electricity. … Electrical safety precautions can protect against electrical shocks and burns, and authorities responsible for workplace safety ensure that workers are following the correct safety procedures while dealing with electricity.
What are the most important safety concerns for electricians?
- Avoid water at all times when working with electricity. …
- Never use equipment with frayed cords, damaged insulation or broken plugs.
- If you are working on any receptacle at your home then always turn off the mains. …
- Always use insulated tools while working.
How can electrical hazards be prevented?
- Inspect wiring of equipment before each use. …
- Use safe work practices every time electrical equipment is used.
- Know the location and how to operate shut-off switches and/or circuit breaker panels. …
- Limit the use of extension cords. …
- Multi-plug adapters must have circuit breakers or fuses.
What are the 4 main types of electrical injuries?
There are four main types of injuries: electrocution (fatal), electric shock, burns, and falls. These injuries can happen in various ways: Direct contact with exposed energized conductors or circuit parts.
What causes electrical hazard shock?
There are two known hazards of electricity—thermal and shock. A thermal hazard is one where excessive electric power causes undesired thermal effects, such as starting a fire in the wall of a house. A shock hazard occurs when electric current passes through a person.
