What do I put on the wall of a dart board

We recommend mounting your dartboard directly onto a stud for maximum support. If you’re mounting your dartboard in drywall, use heavy duty anchors to support the weight of the board. Before you start, make sure you have all the tools necessary. You will need a drill or screwdriver, a pencil, and a tape measure.

What do I put on the wall behind a dart board?

A dartboard cabinet is the best wall protection for dart boards. Not only can it protect your wall, but your dartboard as well. It also offers many other benefits. It is decorative, can hold your stuff, acts as a scoreboard and protects your dartboard when not in use.

Can you hang a dartboard on drywall?

To hang a dartboard on drywall, it’s best to mount the board to a wall stud. The stud provides ample support for the dartboard’s weight. A board can weigh 10 pounds or more, enough to rip the mounting screws out of drywall if the board is hung from drywall without wall anchors.

How do you hang a dart board on the wall?

Line up your dart board by keeping the 20 scoring area vertical as you place the dartboard into the wall bracket. Make sure the disc is attached. Once the brackets are mounted, align the board and drop it into the wall brackets. Mount the board flush to the wall not slanted like a picture.

How thick should a cork be for a dart board?

600mm) x 36” (approx. 900mm) in size and are a full 1” (25mm) thick. As many sheets as required can be butted together forming as large a backing area as needed. Non-reflective cork will eliminate glare.

What are the measurements for hanging a dart board?

Dart Board Height: 5 feet. 8 inches from floor to the center of the bull’s-eye. Distance from front of the dartboard to the throwing line: Steel Tip: 7 feet 9 1/4 inches, Soft Tip: 8 feet 0 inches. To mark the throw line a simple piece of tape will suffice.

Can you hang a dart board with Command Strips?

If it’s a lightweight soft-tip board, no problem. If it’s a real steel-tip dartboard, then no. Even if you used enough Command strips to get it to stay up there, eventually the combination of weight and gravity is going to pull your sticky contraption off the wall.

How do you fix a dartboard cabinet to the wall?

Pre-drilled holes in the four corners of the cabinet should line up with the wall studs (16 inches apart). Use a tape measure to place the center mark that you made in step 3, 68 inches (173 mm) above the floor. Use the screw holes as a template to mark the wall for the screw holes. Remove the cabinet.

How do you hang an arachnid dart board?

Choose a location to hang the board that is near an electrical outlet, and that has at least 10 feet of open floor space in front of the board. 2. Locate a wall stud, and place a mark 76 3/8” (194cm) up from the floor along the stud (see illustration above). Place another mark 16” (40.64cm) below the first mark.

What dart boards do professionals use?

What dart board do professionals use? Professional dart players almost exclusively use bristle dart boards such as the Barrington Collection Bristle Dart Board or the Winmau Blade 5. These meet tournament regulations, allowing them to practice in the right conditions.

Article first time published on

How much does a dartboard weigh?

A high quality bristle dartboard is at least 10 lbs. This weight combined with the force of pulling darts from the board on a regular basis makes using anchors in a dry wall seem pretty risky.

What is regulation darts?

The throwing distance in the game of darts is regulated at 7′ 9.25” | 2.37 m from the oche to the front face of the dartboard. Dartboards must be hung on the wall with the center of the bullseye at 5’8” | 1.73 m from the floor—a height established based on the eye-level of a six foot man.

What is the distance from dartboard to throw line?

Setup the dartboard throwing distance to measure 7 Feet 9 and a quarter inch from the front of the dartboard to the front of the Oche (Throwing Line). The throwing distance can also be measures as 93.25 inches, 2.37 meter or 237 centimetres.

How do you stand when throwing a dart?

Throwing the Dart Stand up straight and try not to lean forward too much. Turn your face so it is facing the dart board and use both eyes to firmly aim. Your elbow should be fixed at a position that is most comfortable when slowly lowering the hand holding the dart from above your head.

Why do my darts go left?

If your throws always go left (across your body) of where you aim it could be a number of things: Parallax & Offset error, Twisting your body, or just not being Aligned with your throw. It might also be time to take another look at How you Aim. If your dart went wild and your throw just felt wrong…

What is a good dart weight?

The bestselling weights for darts falls between 22 grams and 26 grams. The better a player is the more often they fall towards the lighter end of this scale with 22 grams being hugely popular on the Pro-Tours.

You Might Also Like