What do you use to hang things on pegboard

Pegboard is everywhere-panels, hooks, doodads, you name it. Every hand tool in the hardware store is hanging on pegboard. Every bag of bolts, roll of duct tape and tin of Tic Tacs at the checkout counter-pegboarded. Even the pegboard hooks hang on pegboard hooks.

What hooks to use on pegboard?

Most pegboard holes are 1/4 or 1/8 of an inch in diameter. If you have a “small hole” pegboard, then you’ll need pegboard accessories with 1/8-inch hooks. Standard pegboards with 1/4-inch holes can usually use 1/4-hook accessories along with smaller 1/8-inch hooks.

Can you wallpaper over pegboard?

Wallpaper is my favorite way to decorate pegboard. It comes in a variety of colors and patterns, and is very easy to install (even easier and less time than paint!).

Can you screw into pegboard?

Insert a screw with a washer into each marked hole on the pegboard, then fit a spacer onto each screw, on the back side of the pegboard. Position the pegboard against the wall and drive each screw into its corresponding anchor or into a wall stud. If you’re not using a spacer kit, use 2-inch washer head wood screws.

What screws to mount pegboard?

Using a screw gun, 3/4-inch wood screws, and appropriately sized washers, mount the pegboard on frame, aligning outer edges and spacing the screws at equal intervals. (If you do not have a screw gun, drill a pilot hole first, then insert the screws with a screwdriver.)

How do you use a pegboard?

1. Step 1: Find the area where you want to put your pegboard. …
2. Step 2: Locate the studs in your wall using a stud finder and mark them with a pencil. …
3. Step 3: Mount your pegboard in place and secure it via the studs. …
4. Step 4: Finish securing your pegboard to the wall with standard drywall screws.

Can I paint pegboard?

When painting pegboard, we would recommend using a paint gun (or spray paint) over rollers. When using rollers, it will be much easier to get the pegboard holes clogged up, which makes it harder to fill your board with all your pegboard accessories once it’s painted. … Ideally, you’ll use a professional paint sprayer.

Do Command Hooks damage walls?

Damage-free hanging, great for surfaces notoriously difficult to drill. Command™ adhesive holds strongly to a variety of surfaces including solid, hollow and painted walls, and those difficult to drill – such as tiles and glass. They’re easily and cleanly removed – no cracks, holes, damaged plaster or sticky residue.

How far off the wall does pegboard need to be?

Pegboard needs about 1/2 in. of ‘standoff’ space behind it so the hooks can be inserted. Plastic and metal pegboard panels have this space built in, created by the L-shape flanges at the edges.

How do you make pegboard look good?

Frame it! Building a frame is a great way to give a finished look to the edges so your pegboard looks more polished. If you aren’t into building your own, you can also have a custom frame built for it at a framing shop or buy as large a frame as you can find and then cut your pegboard to that size.

Article first time published on

Does contact paper stick to pegboard?

If you can’t find the right size vinyl you need, especially if you’re covering a really large pegboard, you can always use Contact Paper instead.

What do furring strips look like?

If you’re unfamiliar with what a furring strip is, it’s best described as a long, slender strip that’s constructed from either wood or metal. In most cases, furring strips are 1” x 2” or 1” x 3” in size and can be applied both horizontally or vertically.

How do you hang a picture on a pegboard?

You can easily hang artwork by using a string on the back of the canvas or by simply placing two notch hooks on the same row of pegboard holes to create a stable pegboard easel display. Note – There is about 1/4″ of space between the front notch of the hook and the back of the pegboard.

Which side of the pegboard faces out?

Cut and Prepare the Pegboard and Furring Strips thickness. If necessary, cut the pegboard panel to the exact dimensions using a circular saw or jigsaw. Place the pegboard with the façade facing down (the “back” facing up) to keep it clean.

Is pegboard waterproof?

Because plastic pegboard is sleek and waterproof, it’s a good choice for the bathroom. … Pegboard can’t hang flush against the wall – you need to leave a little room for the backs of the hooks.

How do you keep pegboards from falling out of pegs?

1. Get the perfect hooks with double peg attachment and appropriate thickness for your board.
2. Use metal wire to secure thin hooks.
3. Use glue or a zip tie to secure the thin hooks to your board.
4. Use plastic peg locks.