Ford NAA PowerDrawbar (claimed):20.2 hp 15.1 kWDrawbar (tested):26.8 hp 20.0 kWBelt (tested):31.14 hp 23.2 kWpower test details …
How much is a 1953 Ford Jubilee worth?
The preauction estimate is $5,000-$7,000 which is not unreasonable. While Golden Jubilee NAA’s aren’t difficult to find they are popular with collectors and in like-new condition can command premium prices.
What years did Ford make the Jubilee tractors?
The tractors are properly called the Ford NAA but everyone I know calls this model a Jubilee, regardless of the year of production. While the tractor was produced for a short time (September of 1952 through the end of 1954), it was wildly popular. Nearly 130,000 tractors were produced in just over 2 years.
What is a Ford Golden Jubilee tractor?
The Ford NAA is a rare and desirable tractor that was introduced by Ford as an entirely new model in 1953 and dubbed the Golden Jubilee as part of their 50th year anniversary celebration. The NAA designation was a reference to the first three digits of the serial number style used starting with this tractor.Does a 1953 Ford Jubilee have live PTO?
This is the lever for the rare, dealer-installed optional live pto system offered on the 1953 Ford Golden Jubilee and 1954 NAA. If you look close you can also see a hydraulic line running from the pto lever plate and up over the transmission.
What color was the Ford Jubilee?
Ford Jubilee Gold / #c7b992 Hex Color Code. The hexadecimal color code #c7b992 is a medium light shade of yellow.
Does a Ford Jubilee have live hydraulics?
Larger than the 8N, the Golden Jubilee featured live hydraulics, a 50th-year Golden Jubilee badging, an overhead-valve “Red Tiger” four-cylinder engine and streamlined styling, but just as significantly, it was the first tractor Ford built after losing its court battle with Harry Ferguson in 1952 over the patents the …
What is the HP of a Ford 9N tractor?
Ford 9N PowerDrawbar (claimed):12.68 hp 9.5 kWBelt (claimed):20.29 hp 15.1 kWPlows:2 (14-inch)Drawbar (tested):16.31 hp 12.2 kWHow much hydraulic fluid does a Ford Jubilee hold?
Hydraulic reservoir capacity 8 qts. Filler cap is under the seat on the left side. Drain plug is under the hydraulic reservoir.
How many quarts of oil does a Ford Jubilee tractor take?Engine OilOil capacity:5 qts 4.7 L
Article first time published onHow much does a Golden Jubilee weigh?
Dimensions and Tires. With a wheelbase of 73.86 inches, the Jubilee measures a total of 119 inches long, 64.75 inches wide and 74 inches tall. Its operating weight is 2,814 lbs., while its ballasted weight, or weight added to counter additional implements, is 4,392 lbs.
What's the difference between an 8n Ford tractor and a 9n Ford tractor?
For starts, the 8n tractors have a four speed transmission while the order 9n tractors had a three speed transmission. … This lets you control your speed and power a bit more. One way you can easily tell between 8n and 9n Ford tractors is if it has foot pegs.
How many horsepower is a 1953 Ford Jubilee?
Ford NAA PowerDrawbar (claimed):20.2 hp 15.1 kWBelt (tested):31.14 hp 23.2 kWpower test details …
Does a Ford 8n tractor have a live PTO?
One disadvantage of the Ford N’s was, they are not Live pto and Live hydraulic. When you push the clutch in, they stop. The mower stops mowing and if it was raised, it lowers to the ground.
How many horsepower does a Ford 6000 have?
Fifty-five years ago in March 1961, the Ford Motor Company introduced the Ford 6000 as its high-horsepower, row-crop tractor. It was rated as a 5-plow tractor with 66 PTO horsepower. The Ford 6000 featured new styling with a steel casting on the front of the tractor with two built-in headlights.
What years did they make the 9N Ford tractor?
The Ford N-series tractors were a line of farm tractors produced by Ford between 1939 and 1952, spanning the 9N, 2N, and 8N models. The 9N was the first American-made production-model tractor to incorporate Harry Ferguson’s three-point hitch system, a design still used on most modern tractors today.
What is a live PTO on Ford tractors?
Live (two-stage clutch) A live PTO works with the use of a two-stage clutch. Pressing the clutch half-way will disengage the transmission while pressing it fully will disengage the transmission and the PTO. This allows the operator to slow down or change gears while the PTO is still operating.
What's a Ford 9n worth?
A good condition Ford 9n tractor is about $3,000 if it’s a later model. A Ford 9n Tractor from the 1940’s is about $1,500. A mint condition 1939 Ford 9n tractor was going for $15,000 on the internet.
What is 134d hydraulic fluid?
Multi G-134 hydraulic fluid is a multi-purpose fluid for hydraulic systems, wet brakes, various PTO clutch systems, differentials and transmissions in farm tractors. It creates a rust- and corrosion-resistant lubrication, and is slow to oxidize. It is a medium-duty oil, with good anti-wear properties.
What is UTF fluid?
Universal Tractor Fluid (UTF) is the multi-functional fluid formulated specifically for tractors and off-road equipment using a centralized system to lubricate the transmission, hydraulic system, clutches, wet brakes, pumps and other components.
How much horsepower does a Ford 8N tractor have?
Engine and Performance The 8N features a 23.22 belt horsepower with a 27.32 maximum. The tractor has 92 ft-lbs of torque, reached at 1,500 rpm.
How many HP is Ford 2N?
Ford 2N PowerDrawbar (claimed):12 hp 8.9 kWPTO (claimed):23 hp 17.2 kW
How much does a Ford 2N tractor weigh?
DimensionsLength:115 inches 292 cmHeight:52 inches 132 cmWeight:3070 lbs 1392 kgGround clearance:13 inches 33 cm
How much did a Ford 8N tractor cost new?
ProductionManufacturer:FordFactory:Highland Park, Michigan, USATotal built:524,000Original price:$1,404 (1952 )
Where is the serial number located on a 1953 Ford Jubilee tractor?
Ford Jubilee & NAA 1952-1954. The serial number on the first 22,238 NAAs made was on the left side of the engine block, just below the head. On later models the serial number was on the left side of the transmission housing, just behind where the starter is.
