What is a chase pipe

A pipe chase is sometimes also referred to as a plumbing wall. In other words, it is any type of wall that has plumbing piping inside. You may also hear it referred to as a wet wall when in the residential setting or a wet column in the commercial setting.

What does Chase mean in construction?

A chase, as it pertains to new home construction, is a vertical space in a wall that provides an area for pipes or wires to run through.

What is the difference between a chase and a shaft?

Shafts are Fire Protected chases. Chases are vertical and hide pipes, wires, ducts, etc. Soffits are most common outside as the flat underside of the roof to hide the rafter tails; however a drop ceiling or frame down inside may be referred to as a soffit.

What is chasing plumbing?

Probably the simplest way to explain what a plumbing wall/chase is to say it’s any wall with plumbing piping inside. Two other terms that are virtually interchangeable are wet wall and in commercial, industrial and institutional settings when floors are stacked on top of one another, the term wet column is used.

How do you cut a chase in concrete?

During concrete chasing, we use a hand-held cutting machine with a diamond blade to carefully create an opening in the material being cut. The blade and guard can be set to cut the width and depth required. Parallel cuts can be created depending on the number of cables and sockets required.

What is a plumbing chase wall?

A: Chase walls are typically comprised of a double row of framing studs, providing extra depth of wall that serves as a vertical and horizontal shaft for plumbing and other service installations. … These aligned studs are then cross-braced with gypsum board.

What is a chase cut out?

Chase cutting The builder simply sets the depth gauge, then runs the grinder up/down, or across the wall making two parallel cuts, the waste between the cuts is then knocked out used a cold chisel.

Can you chase gas pipes into a wall?

well actually you can chase gas pipes into the wall, but personally I avoid it wherever possible. Here is an old post from doitall which I think explains it well: “First Horizontal piperuns should be avoided. Check for any electric cables, you are not allowed to run along side or cross over cables.

How deep should a chase wall be?

The document states that, vertical chases shouldn’t be deeper than 1/3 leaf of the wall, and horizontal chases shouldn’t be deeper than 1/6 of the leaf.

How do you chase a pipe through a wall?

Always cut a chase vertical or horizontally, never diagonally. This reduces the chances of someone driving a nail into cables or pipes in the future. If making a vertical chase, the chase should not be deeper than a third of the wall’s thickness.

Article first time published on

Should electric cables be in conduit?

9 Answers from MyBuilder Electricians All cables should either be contained in steel conduit or protected by 30mA RCD. If these two cannot be met, then the cables should be installed at least 50mm (2″) from the surface.

What is a mechanical chase?

Mechanical chases are large openings in the attic plane that allow ducts, pipes or wire bunches to pass from the living space into the attic area.

What are utility chases?

A utility tunnel, utility corridor, or utilidor is a passage built underground or above ground to carry utility lines such as electricity, steam, water supply pipes, and sewer pipes. … One may also be referred to as a services tunnel, services trench, services vault, or cable vault.

What is a shaft wall?

Shaft wall systems are a specific category of interior fire-rated partitions designed to be installed from only one side. … A vertical shaft wall system starts at one corner or up against an adjacent column or wall using a vertical segment of tabbed track.

What is chasing a slab?

Concrete chasing is a technique employed for cutting neat channels in masonry or concrete structures known as chases. … The process involves cutting two slots to a precise depth and width, then the concrete centre piece gets removed using a small breaker or a hammer drill.

Can you bury cables in walls?

Burying a cable in a wall is a traditional way to hide and protect the cable. Modern cables can be buried directly in plaster, or protected with capping before plastering. Before a cable can be buried however, a chase needs to be cut!

How do you chase breeze blocks?

1. Decide socket box placement.
2. Mark placement.
3. Chase out the socket box. Attach the Extreme Diamond blade to your multi-tool and begin to cut the notch. Find your local SMART stockist today to get your hands on the Extreme Diamond blade.

Why is it cut to the chase?

Cut to the chase was a phrase used by movie studio executives to mean that the audience shouldn’t get bored by the extra dialogue, and that the film should get to the interesting scenes without unnecessary delays.

What is a chase in a kitchen?

A Chase Scene Trope. Our hero flees the pursuing bad guys through a back door which leads to a kitchen, usually a commercial kitchen, like the kind you see in restaurants, though writers have used an ordinary home kitchen or the kitchen set of a cooking show. … Not to be confused with Cooking Duel.

How do you cut to the chase?

Let’s cut to the chase. After the customary greetings and handshakes, we cut to the chase and began negotiating with our clients. He was busy with his work, so I cut to the chase and told him that the project had been cancelled. I don’t have time for idle talk, so cut to the chase and tell me what you want.

How wide should a plumbing chase be?

Plumbing service chase access will be through a door no less than 30” wide. … Restroom Layouts in new construction and restroom renovations where space permits will incorporate a plumbing service chase with a minimum clearance of 18” from point of access to and behind all plumbing fixtures.

What is a chase ceiling?

An interior duct system is built inside a home’s thermal and air barrier. A dropped ceiling or fur-down chase places the duct system below the ceiling plane of the house in a framed chase. … This space allows the chase’s ceiling drywall to extend beyond the borders of the chase.

What is furring in plumbing?

When the water is heated the calcium or magnesium salts separate from the liquid and build up over a period of time on the inside pipes and boilers. This effect is referred to as “scaling” or “furring” and greatly reduces the efficiency of plumbing and central heating systems.

Do cables in walls need trunking?

If the cable is protected by RCD and comply with the safe zones,you don t need any trunking.”

How wide are wall chases?

Horizontal chases should be no deeper than one sixth of the wall thickness – with standard 100mm blocks, that going to be 16mm which is usually quite sufficient – that’s not allowing for any plaster coating.

Is surface wiring legal?

It is important to realize that surface wiring is only an acceptable practice indoors, and poses many safety concerns when implemented outside.

Can I bury a gas pipe in concrete?

You can bury pipes in concrete as long as they’re protected against corrosion, denso tape will be fine for the water pipes. The gas pipe should be factory coated (yellow) and have no joins or fittings underground, keeping the gas pipe in a duct would be handy, but gas pipes can be buried in concrete too.

Can gas pipe be exposed inside house?

Getting right to the answer, it’s yes, gas piping can be exposed. You should follow certain good piping practices like keeping the piping in protected areas and hanging or strapping the pipe every four feet or less. The type of pipe you use would again depend on what your county allows for piping materials.

Can gas pipe be concealed?

Never conceal your gas line, gas meter, or regulator valves. Always make sure that you do not use a pipe that is longer than 1 meter to connect your gas stove / geyser. Always use prescribed and approved gas pipes.

Can you plaster directly over cables?

2 Answers from MyBuilder Electricians It will not damage the wiring and as long as the cables are RCD protected then everything will meet the current regs.

What is Thistle undercoat plaster?

Thistle’s undercoat plaster is a gypsum-based, internal basecoat that’s used to build up the desired thickness of plaster. … When used in conjunction with Thistle Finishing Plaster or Gyproc EasiFill, you’ll get a smooth, high-quality surface to internal walls and ceilings that’s durable and resistant to knocks.