What is a furr down

The furr down is the enclosed area between the cabinets and ceiling. An enclosed area between the top of a kitchen cabinet and the ceiling is often called a “furr down.” Removing the furr down can give a kitchen a more open feel but it can also expose plumbing, wiring or duct work that may be hidden inside.

What is the difference between a fur down and a soffit?

Fur down is the wall over your cabinets. Many people call it soffit but I was corrected when using that term and was told the construction term is fur down. … Some of you might have an empty space between the cabinets and ceiling.

What does furring mean in construction?

Definition of furring 1 : a fur trimming or lining. 2a : the application of thin wood, brick, or metal to joists, studs, or walls to form a level surface (as for attaching wallboard) or an air space.

What is a fur down in a house?

When you build a fur, you are entrapping a pocket of air somewhere in the space. When you build it against the ceiling, you fur it down (toward the floor), and thus it becomes a “fur down” when colloquially described in noun form.

What is a kitchen soffit?

A kitchen soffit is usually a boxy structure built to hide wiring, pipes, or other mechanicals, or to fill the space between the top of your cabinets and the ceiling. Depending on the age of your home they may be very large and perhaps even extend out past the cabinets.

Are bulkheads and soffits the same?

Soffits describe the area between the top of cabinets and the ceiling. Bulkheads describe the structure that fills in that area. … Instead of empty space above cabinets, bulkheads are solid and box-like structures that fill in that wall soffit.

Is it Furr or fur down?

The furr down is the enclosed area between the cabinets and ceiling. An enclosed area between the top of a kitchen cabinet and the ceiling is often called a “furr down.” Removing the furr down can give a kitchen a more open feel but it can also expose plumbing, wiring or duct work that may be hidden inside.

Why do bathrooms have soffits?

Bulkheads, or soffits, are areas of the ceiling that have been lowered and enclosed. They typically are installed above cabinetry to fill the space between the cabinet and the ceiling. They may also be used to conceal pipes or electrical wires that were installed after the room was framed.

How do you Furr a wall?

Equip yourself with a tape measure and spread it cross the bottom of the wall your about to furr out. With a pencil or a marker, mark a dot every 16 inches. Now, repeat this process at the top of the wall. These markings will indicate where you will vertically attach your furring strips.

Can you build with furring strips?

Furring strips are usually very rough, with lots of imperfections and warping. They are made for use in construction when you need to raise or level things, but are not meant to be seen.

Article first time published on

How thick is a furring wall?

Standard 1-inch-thick furring strips take up less room, an important consideration in small areas where you don’t want to lose space. In larger rooms, the bulk of framing is typically irrelevant. However, framing allows more insulation space than furring strips.

Are kitchen soffits outdated?

Kitchen soffits are out of style, with fewer people retaining these fixtures in their homes and fewer still having them installed at all. Their outdated look often makes a room look smaller, and when building new kitchens, it’s better to free up that space for a bigger and brighter feel.

Why do kitchen cabinets not go to the ceiling?

Disadvantages of Kitchen Cabinets That Go All The Way Up to the Ceiling. Ceiling height cabinets are not easy to access as they are very high up in the ceiling. Anything up there at the top of these cabinets is quite hard to access hence you will need to have something to step on in order to reach these things.

What is interior soffit?

A soffit is an exterior or interior architectural feature, generally the horizontal, aloft underside of any construction element. Its archetypal form, sometimes incorporating or implying the projection of beams, is the underside of eaves (to connect a retaining wall to projecting edge(s) of the roof).

What is a fir out?

Furring out is the act of adding extra wood to a structure to give it additional depth. … It’s usually a 1×2 or 2×2 attached to the face of each stud to help make a wall flat, or make walls meet correctly, or to make room for something like a wire or pipe.

How can I make my kitchen soffits look better?

1. Fill in the space with trim.
2. Fill in the space with a furr down.
3. Fill the space with trim in a contrasting color.
4. Get some really tall upper cabinets.
5. Add a second row of cabinets.
6. Add a window.
7. Paint the wall the same color as the cabinets.
8. Embrace it.

What are bulkheads in a house?

1 : an upright partition separating compartments. 2 : a structure or partition to resist pressure or to shut off water, fire, or gas. 3 : a retaining wall along a waterfront.

Why do you have bulkheads?

Bulkheads are typically used to conceal something. It could be plumbing pipes, electrical wires, duct work, or exhaust fans. When we create a new design for your home, we may want to remove these to make way for higher ceilings or to extend cabinet height. There are also times when we will add bulkheads to a room.

Why are there bulkheads in kitchens?

A bulkhead is a lower portion of the ceiling and is predominantly installed for functional reasons: to conceal services, to project air conditioning and to mask changes in ceiling heights. But kitchen bulkheads can also serve as decorative design features, as well as defining the kitchen area in an open-plan setting.

What is furred ceiling?

[¦fərd ′sē·liŋ] (building construction) A ceiling in which the furring units are attached directly to the structural units of the building.

What is a furring strip made of?

A furring strip is basically a long, thin strip that is typically made from wood or metal. A furring strip is generally used to level a surface in order to finish it.

What is Z furring?

Furring Channel for Walls and Ceilings ClarkDietrich Z-furring is used to furr out interior masonry or poured concrete wall substrates and to support rigid polystyrene, mineral, or fiberglass batt insulation while providing a uniform plane for gypsum panel attachment.

Can you attach drywall to furring strips?

By using furring strips, you can install drywall over a masonry wall. … If you want to install drywall over a masonry wall, an old plastered wall, or over a wall where the studs are uneven, you can install furring strips first, and then install the drywall to the strips.

Are furring strips necessary?

Whether it’s the ceiling or the walls, furring strips are essential to ensuring that you’ll always get a flat and smooth surface when the project is complete. When applying furring strips to your walls, they will have to be directly screwed or nailed into the wood or concrete wall.

What are 2x2 furring strips used for?

This furring strip is used for furring out walls, ceilings or other non-structural applications.

Can you put a drop ceiling in a shower?

When building or remodeling a basement bathroom, it is OK to have dropped ceilings above a shower but moisture damage is a concern. For this reason, choose moisture-resistant nonporous ceiling tiles for the project.

Why is shower ceiling lower?

Some say 7 feet is tall enough for a shower ceiling. It’s functional because it keeps the heat in allowing for a warmer shower. … Look at this low ceiling. So as you can see, the shower ceiling in this bathroom was very close to the shower head, dropped down about a foot from the rest of the room.

Why is there a bulkhead over bathtub?

They do serve a purpose, typically it is to hide pipes, ductwork, and electrical. I find that, most of the time, they are empty or filled with insulation, if it’s on your upper level. Once the demolition is done and the space is inspected, it can then be determined whether or not the bulkhead can be removed.

What is a Furr wall?

What’s a furred wall? For people who are unfamiliar with this term, a furr out wall is when you expand the thickness of a wall using furring strips. Some people refer to this as building one wall inside of another.

How much do wahoo walls cost?

Wahoo Walls costs about $500 for five panels that are 20 linear feet long.

Can you put Sheetrock over concrete?

You can put drywall over concrete, but it is important to be mindful of the process. Drywall should never be installed directly to a concrete slab, and should be installed over a barrier wall to prevent any type of moisture transfer, which could create mold and damage the drywall.