What is a pop up sprinkler – Google Search

The pop up sprinklers rise from the ground whenever the system is activated, and then retract back down when the system is turned off. Pop up sprinkler systems are ideal for many different types of gardens, and are used primarily for watering grass areas, but can also be used for watering flower beds and borders too.

Are pop up sprinklers good?

Pop-ups are the ultimate in water delivery systems for your lawn and garden. They offer great usability while being concealed when not in use and are specifically designed as part of a system to offer maximum water efficiency. pop-up sprinkler systems are ideal for many different types of gardens.

How far apart do you put pop-up sprinklers?

Meaning that spray heads should never be placed further than 15 ft. apart as this would create dry spots (i.e. dead grass) in your lawn. It is always important to install sprinklers with overlap for full coverage.

What is a pop up sprinkler head?

Pop-up Spray and Rotor Heads This type of sprinkler head is the most commonly used for residential and small commercial applications. Designed to supply a continuous stream of water, pop-up spray sprinkler heads use a variety of nozzle patterns to distribute the stream of water to suit the contours of your landscape.

How much water do pop-up sprinklers use?

That might not sound like a lot, but your sprinkler system uses about 12 gallons of water per minute, which works out to 2,160 gallons or $13 over three hours.

Which pop up sprinkler is best?

2.5 K-Rain Pro-S 4″ Professional Pop-Up Sprinkler Head.
2.6 Hunter Industries Hunter Pro 4″
2.7 Orbit 55201 Pulse XL Sprinkler Head.
2.8 Orbit 54054 Brass Shrub Sprinkler Head.
2.9 Orbit 54242 400-Series Professional Sprinkler Head.
2.10 Rain Bird Professional Pop-Up Sprinkler Head.

What type of pop up sprinkler is best?

Pop ups are typically installed around the outside of your lawn and spray water from overhead to water your lawn. The most efficient and versatile are the Rotator type sprinklers such as Hunter MP rotators and Rainbird R-Vans.

How much do pop up sprinkler heads cost?

Head TypePart CostReplacement CostPop-Up 2”$3–$4$8–$11Pop-Up 4”–6”$2–$5$8–$11Pop-Up 8”–12”$10–$12$19–$21Fixed$7–$11$12–$16

Where should I put sprinklers?

For less easily divided dimensions, place a sprinkler head in the corners and work out the fewest number of heads for each long side based on how far the spray heads or rotors throw. Put a sprinkler head in the middle of the lawn if the area is wider than the sprinkler heads can throw.

Are pop up sprinkler heads Universal?

A replacement sprinkler head doesn’t have to be the same brand as the broken head. But it does have to be the same type: pop-up (stationary, rotor- or gear-driven rotor) or impact. And the new head must also match the inches-per-hour (iph) or gallons-per-minute (gpm) delivery rate of the old head.

Article first time published on

What are the different types of sprinkler heads?

There are three basic sprinkler head types– Spray Irrigation Heads and Spray Rotary Sprinkler Heads, Bubbler Irrigation Heads, and Drip or Soaker Systems. Each different sprinkler head will water your plants in the particular way they like.

How much pressure do pop up sprinklers need?

We’re Talking PSI The optimum operating pressure for most residential sprinkler heads is between 30 and 50 pounds per square inch (PSI). With correct water pressure, each head will perform the way they were designed, and the result will be even spray-patterns and efficient use of water.

How many sprinklers can I put on one zone?

At different pressures, the sprinkler head and nozzle will consume different amounts of water. For example, at 35 pounds per square inch (PSI) the 5000 Series Rotor using the 3.0 nozzle will use 3.11 gallons per minute (GPM). If your home’s water capacity was 10 GPM, you could place 3 heads per zone.

How many sprinkler heads do I need?

As a general rule, HomeTips experts recommend placing the sprinkler heads, so their spray doesn’t overlap. The optimum distance is for one sprinkler head’s throw (how far the water from the sprinkler will travel) to touch the next sprinkler head, or “head-to-head” coverage.

How far will a Rainbird 5000 spray?

Rain Bird 5000 Series Rotors are ideal for medium to large-size lawns and evenly distribute water from 25 to 50 feet. 5000 Series Rotors with Rain Curtain Technology are engineered to deliver a uniform spray pattern, giving you superior distribution uniformity and a consistently greener lawn with less water.

What sprinkler covers the most area?

The Melnor XT Oscillating Lawn Sprinkler with Width & Range Control could be the best sprinkler for a large area, thanks to its wide base, 20 nozzles, or its adjustable width and flow. It can cover up to 4,200 square feet, which is a huge space.

What is the best sprinkler for low water pressure?

Dramm ColorStorm Spinning Sprinkler. …
Gilmour Circle Pattern Spot Sprinkler. …
Orbit Garden Enforcer Motion Activated Sprinkler. …
Gardena ZoomMaxx Oscillating Sprinkler on Weighted Sled Base. …
GrowGreen Rotating Lawn Sprinkler.

How many minutes should I water my lawn?

It is ideal to water lawns about one inch of water per week. To determine how long you need to water to get one inch, place a plastic container in your yard and set a timer. On average, it will take 30 minutes to get a half inch of water. So, 20 minutes, three times per week will give a lawn about an inch of water.

Does a sprinkler use a lot of water?

Watering with a typical sprinkler using a standard 5/8″ garden hose for one hour uses about 1,020 gallons of water; if you water three times per week, that’s about 12,240 gallons per month.

Which is better hunter or Rainbird?

Hunter products are slightly more durable than Rainbird. They can handle a greater PSI which is important when it comes to water pressure, winterization and extreme weather. Sprinkler heads sit in the ground which experience extreme temperatures. … Hunter Controllers are way easier to program than Rainbird.

How do you protect a pop-up sprinkler head?

Sprinkler donuts wrap around your sprinkler heads when they are inactive as an added layer of protection. They are made of various materials, like plastic or concrete. Find a donut the right size for your sprinkler heads. Sprinkler donuts can be purchased at any lawn care store or online.

How many sprinklers can I run?

For example, you generally have a flow rate of 10 gpm from a ¾-inch spigot where you connect your hose. With your 10 gpm flow rate at your spigot, you could run two sprinklers at 5 gpm each. The best set-up is to run two hoses from the spigot–each to one sprinkler.

Are Rainbird sprinklers good?

Today, however, the battle is between two great sprinkler systems: Hunter and Rainbird. … But for homeowners who want a sprinkler system that is well-built, reliable and relatively affordable, Rainbird and Hunter sprinkler systems represent the gold standards, the best of the best, the right way to water your lawn.

What is the most efficient sprinkler head?

The MP Rotator is the most efficient sprinkler nozzle available on the market today. This high efficiency rotating nozzle has been defined as a water-saving device, perfect for retrofitting older systems and great for new installations. The MP Rotator was designed with efficiency and sustainability in mind.

Does Home Depot sell Rain Bird sprinklers?

All Rain Bird Sprinkler Systems can be shipped to your home, even delivered to you from your local Home Depot. What is the top-selling product within Rain Bird Sprinkler Systems? The top-selling product within Rain Bird Sprinkler Systems is the Rain Bird 3500 Rotor with Nozzle Tree (12 Pack-Pro Pack).

How deep are sprinkler lines?

Basic Depth Requirements In most areas, burying the pipes 8 to 12 inches below the surface is adequate. This measurement is from the top of the pipe to the surface of the soil, which means your trenches must be slightly deeper to accommodate the pipes.

How far does a sprinkler head need to be from a wall?

All standard spray sprinklers have four-inch minimum spacing from walls and maximums that vary with room shape and size. All standard sprinkler heads—pendent, upright, and sidewall—have the same minimum sprinkler distance from walls: four inches.

Can you cap a sprinkler head?

To cap a sprinkler head, you’ll have to remove the existing sprinkler cap and replace it with a flat cap that will prevent water from flowing into that head. You can also completely remove the sprinkler head and cap it with a PVC pipe cap.

How do I buy a sprinkler head?

Tip: When choosing your sprinkler heads, identify oddly shaped areas and borders as well as sections that may need less water than others (for example, shrubs and trees require less water than grass and flowers).

Should sprinkler heads be flush with the ground?

STEP 2: Dig up the broken sprinkler head. Sprinkler heads sit just below or flush with the ground, so a sturdy trowel is typically suitable for digging up the head. … Then dig a hole about 6 inches deep and a foot in diameter around the broken sprinkler head, taking care not to puncture the water line with your trowel.