What is an eight point buck

The eight point rule is the primary harvest strategy of some managers trying to increase buck antler size. Managers using the eight point rule allow harvest of bucks with eight or more antler points while protecting bucks with fewer points.

What does an 8-point buck mean?

A buck with two standing normal points per side is an 8-pointer, one with three standing points is a 10-pointer, and so on.

Is an 8-point buck good?

Good bucks will have at least seven or eight inch second points. Outstanding animals may have G-2’s 9-11 inches long. The third point may be shorter or longer than the second, but it too should be eight inches or longer on an outstanding buck.

How do you count points on a buck?

Measure each protrusion from the area where it leaves the main beam to its tip. If it measures at least 1 inch in length from the main beam, it is counted as a point.

Is an 8-point buck always an 8-point?

No, in California it will probably be a 4-point buck but on the East coast it’s an 8-point buck. Generally, the West coast refers to the highest count on one side while the East coast refers to the total points.

Is a 8-point buck big?

Research shows that most bucks are 8-pointers, like this one killed by Wyatt Reinhardt of New Hampshire, once they get to age 3 or older. No matter what part of the country or older age class, the 8-point buck comprises most of the antler makeup — which is fine with most hunters.

How old is a 10 point buck?

To provide parameters, a ten-point buck is considered mature around three and a half to fours of age and in its prime from six years and older.

How big is a 140 class buck?

These measurements would be somewhere in the ballpark of 3.5-4 inches. The third and fourth circumference measurements are around ¾ the size of the eye so can be estimated to be around 3 inches. The sum of the example buck’s circumference measurements is 14 inches.

How do you score a 8 point buck?

On an 8-point, you take the smallest circumference measurement between the burr and brow tine (G1), one between the G1 and G2 tines, the third circumference measurement between the G2 and G3 tines, and the last measurement comes half way between the centerline of the G3 tine and the end of the main beam.

What is considered a trophy buck?

The term “trophy buck” has been around about as long as black powder. Or maybe a lot longer, since big antlers have been found in prehistoric campsites. … But what do veteran hunters call a trophy. To most, it is probably a deer with antlers that score over a certain minimum.

Article first time published on

How old is a typical 8 point buck?

Nearly all bucks with superior genetics and adequate nutrition have eight or more points when 2 years old. Bucks with inferior antler genetics may never have more than seven points, even when mature.

How big is a 150 class buck?

These measurements would be somewhere in the ballpark of 3.5-4 inches. The third and fourth circumference measurements are around ¾ the size of the eye so can be estimated to be around 3 inches.

How big is a 170 buck?

than the ear measurement of 7-8 inches, you can quickly gather a rough sum of the tine measurements. This buck’s tines can roughly be summed to roughly 18 inches.

Can you have a 9 point buck?

Some national magazines compared it to a South Dakota record deer shot in 1965. … Both those deer netted 1803⁄8. “Boone and Crockett accepted it as a 9-point buck, and that didn’t change its status,” Walmsley said. “It would have been the record 8-point, but it is now the largest 9-point typical ever accepted.”

What's a 5 point buck?

It is the number of antler points. In the East a 5 point dear means total points, both sides, ie; 2 pts on one side, and 3 pts on the other. In Western count, a 5 pt deer means 5 point on each side. A 3×4 would be 3 pts on one side, and 4 pts on the other.

What determines the size of a buck's antlers?

Three major factors that determine antler size are: age of the buck, genetics of the animal, and nutrition. Said another way, you will not get maximum antler size unless the animal has the genetics, is a healthy mature buck >5years old, and has consumed the nutrients needed to achieve the genetic potential.

What is the biggest point buck?

Rack Report DetailsWeapon:Savage .270 / Bushnell Scope

Can you age a deer by its antlers?

Aging a Buck Based by Its Antlers. Look at the length of its antlers. Get a side view of the deer and take a look at how long the antlers extend in front of its face. An older buck’s antlers will stick out about as far as the deer’s nose.

What age do bucks grow antlers?

Antler growth of male fawns, or “button bucks,” is generally noticeable at 4 to 5 months of age by the presence of “buttons.” At 1-1/2 years of age (yearlings), males grow their first noticeable antlers, which can range in size from spikes to 10 or more antler points.

What is considered a big 8 point whitetail?

Every deer hunter loves a big 8-pointer! It takes some impressive measurements for a buck to crack the 170-inch minimum to make it into the Boone and Crockett record book with only eight scorable points. In fact, it has happened less than 40 times in the club’s storied history.

What is a good score for a whitetail deer?

For a typical whitetail, meaning the antlers are symmetrical, the minimum score is 125 inches. A non-typical whitetail must have a minimum score of 155 inches for entry. A typical mule deer has to tape out at 145 inches or greater, while a non-typical muley is eligible at 170 inches.

Do bucks get bigger antlers every year?

Since most free-range deer are hunted during their prime age of five to seven, you will find few deer older than eight years old. Until this age, deer antlers get bigger each year. As deer age, the shape and size of their antlers will decrease and their body mass will shrink.

How many points are deer antlers?

Most bucks will have 8 to 10 antler points when they reach maturity, but there are often deer that have non-typical antler development which results in more. Deer antler mass increases with age and good nutrition, but only until maturity is reached.

What is a G1 on a deer antler?

G1 refers to the first point on an antler. This is typically the location of the brow tine (if the brow tine is missing, the G1 is missing). G2 is the next tine, then G3, and so on (see photo above). A normal 8-point buck would have a G1, G2, and G3.

How big is a 130 buck?

Adding the Measurements For this buck, a very symmetrical buck, we can total the antler measurements to be roughly 51-52 inches.

How big is a 160 buck?

These measurements would be somewhere in the ballpark of 3.5-4 inches. The third and fourth circumference measurements are around ¾ the size of the eye so can be estimated to be around 3 inches.

How big is a Boone and Crockett whitetail?

The average Boone and Crockett-class buck has main beams measuring 25.63 inches. For field judging purposes, it’s about 8 inches from a buck’s eye to the end of its nose, so look for main beams at least three times that length. The next-most important factor is mass.

Is a 120 inch deer good?

good width, good mass, good tines. just not great in anything. pic makes him look better than he is. Deer in the middle is a 10 point that should be right at 120!

What is considered a wide whitetail buck?

An Ear’s Width A wide spread between antlers also indicates long beams, with a trophy-caliber deer requiring an outside spread of at least 20 inches. Since the tips of a mature buck’s ears are about 18 inches apart, look for a spread that reaches beyond the ears.

What is a 14 point buck?

In certain cases, the points are especially notable; bagging a 14 point buck, for example, is considered to be quite an accomplishment for a hunter. Male moose have palmate antlers, while other moose have a dendritic configuration like deer.