DensGlass® Sheathing is a gypsum panel made of a treated, water-resistant core, surfaced with fiberglass mats and a GOLD colored primer coating.
Is DensGlass a gypsum?
DensGlass® is a gypsum panel with fiberglass mat facings and its widely recognized GOLD colored primer coating for superior mold and moisture resistance. … Ideal for EIFS, brick and other exterior cladding applications.
Is DensGlass structural?
DensGlass SilverTM residential structural wall sheathing incorporates the proven glass mat Dens TechnologyTM with a moisture-resistant core to produce a residential exterior sheathing that: … Provides moisture resistance.
What is the purpose of DensGlass?
DensGlass® Sheathing It is a preferred substrate under brick, stone, stucco, siding and EIFS due to its ability to protect a structure against incidental moisture during and after construction. DensGlass Sheathing adds performance and durability to a wide range of fire-rated and non-fire-rated building assemblies.Is DensGlass sheathing waterproof?
It is a ready-mixed, flexible, waterproof coating which can be used on gypsum, cement or wood based sheathing substrates. Sto VaporSeal over DensGlass panels can be used on vertical above grade walls.
Can you screw into DensGlass?
Fasteners should be driven flush with the panel surface (not countersunk) and into the framing system. Locate fasteners at least 3/8” (9 mm) from the ends and edges of the sheathing. Nails or screws, as listed in the fastener chart, may be used to attach DensGlass Sheathing to framing.
Can you put stucco on DensGlass?
You can install stucco over DensGlass for a long lasting finish. DensGlass exterior sheathing is a paperless board that prevents moisture wicking and the interior of your home from becoming exposed to the elements. … You can apply stucco to DensGlass yourself, using some basic tools.
Is DensGlass a drywall?
DensGlass 5/8-in x 4-ft x 8-ft Mold Resistant Moisture Resistant Drywall Panel.Can you use DensGlass on roof?
With DensGlass Sheathing as a substrate, roof system warranties may not apply. Some roof system manufacturers say, “If the membrane bonds satisfactorily, we’ll accept DensGlass Sheathing as a substrate, but we won’t warrant it.”
Can DensGlass be used for interior walls?Interior Walls DensGlass® Shaftliner is a 1inch / 25mm gypsum panel used in fire-rated shaftwall, stairwell, mechanical duct, and residential area-separation-wall assemblies.
Article first time published onCan DensGlass be used for shear wall?
The DensGlass® sheathing panels may be used as a component of engineered shear walls when designed in accordance with IBC Sections 2305 and 2306 for wood framed walls or Section 2211.6 for light-gage steel- framed walls.
Is DensGlass an air barrier?
It is a polymer-modified emulsion and designed for spray or roller application. The membrane is also an air and water barrier. ExoAir™ TWF is a self-adhered 40 mil (Thru-Wall Flashing) membrane.
Can DensGlass gold be painted?
DensGlass Sheathing is an ideal product for exterior ceilings and soffits for both cold and warm climate zones. It resists sagging, even under exceptionally humid conditions. Panels are applied directly to structural framing. Surface and joints may be finished and painted, or surfaced with an exterior finish system.
Can you paint exterior gypsum sheathing?
The surface or face of Exterior Gypsum Sheathing is not designed to be finished similar to traditional wallboard nor is it a sub- strate for the direct application of stucco, paint or textures. … Sufficient risers must be used to assure support for the entire length of the wallboard to prevent sagging.
How do you seal DensShield seams?
By caulking the intersecting corners of DensShield Tile Backer panels and around a tub base or shower pan with flexible sealant, a moisture-resistant envelope can be established. The sealant should be applied to the DensShield Tile Backer corners PRIOR to taping the joints.
What is the best backer board for a shower?
Cement board is a good, reliable backer board that works well on both floors and walls. Keep in mind that most tile setters err on the side of caution and brush a waterproofing membrane on top of cement board when it is in wet areas like showers or tub surrounds.
Can you paint over DensShield?
Easier to handle than cement board, DensShield Tile Backer cuts and installs like drywall without special tools or fasteners. It can also be painted or used in non-wet areas.
Does DensGlass have an R value?
R-Value (ASTM C518): 0.56.
Who makes DensGlass?
Rely on Georgia-Pacific Gypsum’s industry-trusted line of high-performance exterior gypsum panels, including DensGlass®Sheathing– the #1 architecturally specified fiberglass-mat gypsum sheathing. Widely recognized by its GOLDcolor, DensGlass®Sheathing has an exemplary track record that spans more than 30 years.
What is eXP sheathing?
eXP® Sheathing consists of a moisture- and mold-resistant gypsum core encased in a coated, specially designed PURPLE fiberglass mat on the face, back and sides. The glass mat is folded around the long edges to reinforce and protect the core, and it provides superior weather resistance.
What is used for exterior sheathing?
There are many exterior wall sheathing options available, with wood sheathing being one of the most commonly used materials. Wood sheathing materials include plywood, oriented strand board (OSB), and waferboard. Plywood is made of whole sheets of wood that are cross-laminated.
How do you cut dense glass?
The nice thing about this product is you can cut it with a utility knife just like using regular drywall. Georgia Pacific publishes a pretty good resources for showcasing and using DensGlass Sheathing.
What does sheathing mean in construction?
Sheathing is the protective covering or casing used on flooring, walls and roof assemblies on both residential and commercial buildings. Why is sheathing essential you may ask? Sheathing is the base on which material will be applied onto such as flooring, roofing shingles, and siding.
Can you walk on DensDeck?
Allow primer to dry before walking on the DensDeck Prime substrate. Cover the membrane with the exposed roofing material as soon as possible.
What is roofing Coverboard?
A cover board is a thin substrate to which a roof membrane is adhered. However, the use of a cover board far exceeds that of a substrate — it also serves as a critical component that helps to extend the life of a roof.
Is DensDeck waterproof?
The patented DensDeck® design employs glass mat facings front and back that are embedded into a water-resistant gypsum core providing excellent fire resistance, moisture resistance, and wind uplift properties.
What is exterior gypsum sheathing?
Description. Exterior Gypsum Sheathing is a water-resistant product designed for attachment to exterior side-wall framing as an underlayment for various exterior siding materials such as wood, metal or vinyl siding, masonry veneer, stucco, shingles, etc.
Can you paint glass mat sheathing?
Conventional paint systems won’t hide joint telegraphing with glass mat gypsum board. Additional finishing steps are needed. Conventional paint systems cannot hide such substantial differences in surface appearance, so additional steps must be taken.
Is DensShield fire rated?
DensShield Tile Backer is composed of a water-resistant treated core that is covered front and back with fiberglass mats. … DensShield Tile Backer has been shown to be excellent for tile and non-tile installations in wet and non-wet applications, in areas of high humidity, and in appropriate fire-rated wall assemblies.
