The DeWalt DWS780 has a stainless-steel detent plate with a cam lock. … On the other hand, the DeWalt DWS779 has a double horizontal rail with an excellent clamping system. It works rather well and features a linear ball bearing, which makes cutting more accurate.
What is the difference between DeWalt model DWS779 and DWS780?
The DeWalt DWS780 has a stainless-steel detent plate with a cam lock. … On the other hand, the DeWalt DWS779 has a double horizontal rail with an excellent clamping system. It works rather well and features a linear ball bearing, which makes cutting more accurate.
Which DeWalt saw is best?
DEWALT Miter Saw DWS780 – Best overall Our favorite DeWalt miter saw is the DeWALT DWS780. This precise miter saw gives the best of cuts when you are working on wood and this guarantees professional-grade finishes and a fine look.
Is DeWalt DWS779 discontinued?
The DeWALT DWS779 is now discontinued and selling at a reduced price. It was replaced by the DWS780 which is the updated model with some additional features. Unlike the DWS780, the DWS779 does not have the XPS light that indicates the cut line on the workpiece.Does the DeWalt DWS780 have a laser?
A: The 779 does not have a laser guide. The major difference between this saw and the 780 is the addition of the XPS LED (for a $300 price addition.). … A: There is no laser system. For $200.00 more, the DWS780 has an LED that projects a straight line shadow onto the material you are cutting..
What blade comes with the DeWalt DWS779?
Inside the big yellow box, you’ll find everything you need to put the DeWalt DWS779 to work. A 12”, carbide-tipped 32-tooth blade comes pre-installed on the saw. It’s a decent-quality blade, and it’s fine for general construction.
What is XPS technology Dewalt?
Essentially XPS technology uses an LED to project light down either side of the blade, creating a shadow of the blade in the work area. As the blade lowers, the shadow sharpens, darkens and shows exactly how wide the cut will be once it’s made.
Where is the DeWalt DWS779 made?
It is pretty much the 780 without the XPS light. Like the Flexvolt saws this is made in Taiwan instead of Mexico. This allows for a lower price point without sacrificing quality.Does the DeWalt DWS779 have a light?
The XPS work light cut-line technology for the Dewalt DWS779 miter saw is vastly preferred by woodworking professionals over older laser light options offered on lesser miter saws. The LED light is positioned directly above the miter saw blade and casts a shadow of the blade kerf directly onto the piece being cut.
Where are DeWalt Mitre saws made?Where Are The DeWalt Manufacturing Facilities In The United States? DeWalt currently has manufacturing plants in Maryland, North Carolina, South Carolina, Tennessee, Kentucky, and Connecticut.
Article first time published onWhat is a bevel cut?
A bevel is an angled cut relative to the face of the material. This can be an angled cut along the entire side of a plank of wood, or cut at the end of the wood. The picture above is a bevel cut into the end of a piece of wood. Mitre. A mitre is an angled cut cut relative to the square side of the material.
What is the best Mitre saw to buy?
- Ryobi. EMS190DC 18V ONE+ Mitre Saw.
- Evolution. R255SMS 240V 255mm Sliding Mitre Saw.
- Makita. LS0714LN 190mm Slide Compound Mitre Saw 240v.
- Evolution. FURY6 210 Multi-Purpose Mitre/Table Saw.
- Draper. Precision Hand Mitre Saw.
What is the Dewalt integrated cutline blade positioning system?
The saw features a Cutline Blade Positioning System where a light on the blade creates a shadow indicating exactly where the cut will be made on the workpiece.
Can a 12 miter saw cut a 6x6?
The bevel ranges max out at 45 to 48 degrees. Performance and Cutting Capacity. … No saw could cut through a 4×4 at a 45-degree bevel angle, nor could any cross-cut a 6×6.
What is DeWalt back fence design?
Dewalt makes the back fence feature so you can cut really wide boards. There is added time for set up when using this feature for really wide cuts.
What is XPS shadow line?
How The XPS Shadow Line Works. … There are two led lights that shine onto either side of the blade of the saw which creates a shadow on the cutting surface so you can see exactly where the blade will cut. Not only will it show you the line that the blade will cut it will also show you thickness or kerf of the blade.
Can you add a laser light to a miter saw?
If you’ve seen those laser cutting guides on miter saws and wonder if you can add one to your old saw, take heart. It’s possible, and not terribly expensive. The guide fits alongside the blade, replacing the outer washer.
Does DWS779 come with blade?
Yes, DWS779 will include blade #DW3126.
How much does a Mitre saw cost?
A basic compound miter saw starts at $100, while miter saws with sliding blades start at $125. Dual-bevel miter saws start at $200, and professional-level miter saws with special features can cost as much as $800.
How wide is a Dewalt miter saw?
BrandDEWALTBlade Length12 InchesItem Dimensions LxWxH27.17 x 22.44 x 19.88 inchesPower SourceCorded ElectricSpeed3800 RPM
Can I add XPS to DWS779?
The DWS779 and DWS780 are the same saw mechanically, but the DWS780 includes XPS light technology as standard equipment. … An XPS light upgrade kit can be purchased for the DWS779 saving you hundreds of dollars and can be installed in just a few minutes.
Who is DeWalt owned by?
One, a whole bunch of the top power tool brands — including DeWalt, Black & Decker, Craftsman, Porter-Cable and more — are all owned by the same company, Stanley Black & Decker.
Did DeWalt get bought out?
TypeSubsidiaryParentStanley Black & DeckerWebsitewww.dewalt.com
Is DeWalt good quality?
The most trusted power tool brands, in order, were Dewalt, Craftsman, Milwaukee, Makita, Bosch, Stanley, Black+Decker, Ryobi, Kobalt, Hitachi, Ridgid, Husky, and Irwin. Dewalt received the best reviews and trust ratings among the most popular power tool brands as judged by consumers.
What is a pocket cut?
Pocket cuts. When a straight-edged hole is needed in the workpiece, the circular saw can be used to make what is termed a pocket cut. … Angle the saw on the toe of its shoe immediately above a line to be cut.
What is plunge cut?
May 11, 2016. When you need to cut a shape inside a piece of wood, a plunge cut is pretty much your only choice. Typically, you might use a drill with a small bit to bore a hole that you can drop your jigsaw blade into to start cutting.
What is a chamfer cut?
In machining a chamfer is a slope cut at any right-angled edge of a workpiece, e.g. holes; the ends of rods, bolts, and pins; the corners of the long-edges of plates; any other place where two surfaces meet at a sharp angle. Chamfering eases assembly, e.g. the insertion of bolts into holes, or nuts.
How do you rotate a Dewalt saw?
Once the miter saw is turned to the angle that you want to set it at, simply press the handle down to lock it. Adjusting the bevel angle is also easy, simply loosen the bevel lock knob and rotate to the angle desired and tighten up the knob.
Is DWS716XPS discontinued?
Dewalt has come out with a new 12″ dual bevel compound miter saw, DWS716XPS. … Upon seeing this saw being described as discontinued, I reached out to Dewalt, asking for more information about the product update and changes.
