What is the difference between a regular tree and a pro tree

The “Standard” tree will light up each large amber light consecutively with a . … A “Professional” tree will light up all of the large amber lights simultaneously, and then after a . 400 second delay, light up the green light.

What does pro Tree mean?

The first type which is mainly used by the NHRA Pro drag racing is called the Pro Tree. … The Pro Tree is when all three amber lights flash simultaneously followed four-tenths of a second later by the green light ( green is when you gas the vehicle forward).

What is a practice Tree race?

Today, many racers have found a way to fulfill their need for competition and socialize with friends by attending organized practice Tree events. … Each “race” is contested using a full three-amber Tree, and each competitor has the option to fine-tune their reaction times using a delay box.

What is a 400 pro Tree?

400 Pro Tree. This is the Pro Tree. With the “Pro Tree” you stage just like in the Sportsman Tree but the three amber lights illuminate at exactly the same instant and the green follows exactly . 4 seconds later.

What is a .500 pro tree?

500 Professional tree, where the delay is . 500 seconds instead of the . 400 seconds used in a standard Professional tree. On the activation of the green light from either style of tree, the drivers are supposed to start the race.

What's a good reaction time drag racing?

400 seconds is considered a perfect Reaction Time). Leave too soon and you “red light,” or foul and are disqualified. Leave too late and you may give your opponent a head start that you can’t overcome, even with a quicker and faster car.

What is the light called in drag racing?

Depending on the type of racing, all three large amber lights will flash simultaneously, followed four-tenths of a second later by the green light (called a Pro Tree), or the three bulbs will flash consecutively five-tenths of a second apart, followed five-tenths later by the green light (called a Sportsman, or full, …

What does a drag race entail?

A drag race is an acceleration contest from a standing start between two vehicles over a measured distance. A drag racing event is a series of such two-vehicle, tournament-style eliminations. The losing racer in each contest is eliminated, and the winning racers continue until one remains.

What does tree mean in drag racing?

You could also say: ‘Tree. Definition: The starting line light fixture that lets racers know when the car is properly positioned for a start and when to start. Trees often have the following bulbs: Pre-staged and staged (yellow), countdown (three amber bulbs), start (green bulb), and foul start (red bulb).

What does top bulb mean in drag racing?

Top bulb racing is delay box racing which is the use of a timer and your enter a time to make it where the rider can let off a button on the top yellow and the bike leaves the line once timer runs out…

Article first time published on

How far is the Christmas tree from the starting line?

When the front tires of a vehicle break the first light beam, called the pre-stage beam, the pre-stage light on the Christmas Tree indicates that the racer is approximately seven inches from the starting line.

What is double bulb in drag racing?

The opposite of courtesy staging is generally called double bulbing. Which is when a racer turns on the first and second stage bulb before their opponent turns on their first bulb.

What does ET mean in drag racing?

Elapsed Time (E.T.) The time of a training run or a race. The time is measured precisely between the start an finish light barrier down to a thousandth of a second.

What does staging mean in drag racing?

Shallow staging involves rolling through the starting area until both the prestage and stage lights are lit. This maximizes the amount of rollout you have, which improves elapsed time at the expense of reaction time. This is the technique recommended for new bracket racers until they learn proper launch procedures.

What is a no time race car?

No Time or N/T means, as in grudge racing, no times are given out by the announcers or displayed on the scoreboards. The time slips are cut in half, as well as the winning margin being cut away. Secrecy is a major part of the game.

When should you leave on a sportsman tree?

A sportsman tree is where the three amber lights flash consecutively five-tenths of a second apart, followed five-tenths later by the green light. React or leave when you immediately see the last yellow come on.

What does box and no box mean in drag racing?

A delay box is a device that assists in perfecting your reaction time in a drag race, however some drag racers conceal the device and race in a no box class. … During a race, a driver releases a button that internally countdowns the electric signal until it releases the trans-brake to almost a perfect light.

What is giving the hit in street racing?

To get the “go”, jump, break, hit, kick, or move is to start the race without the flagger. This is another system of handicapping that requires one car to wait until they see the other car start to move before they are allowed to leave their starting line.

Who invented the drag race?

Drag racing as an organized sport began in the 1930s on dry lake beds in southern California, and it gained greater respectability after Wally Parks helped organize the Southern California Timing Association (SCTA) in 1938.

What is red light in drag racing?

Foul Start Also known as a red-light. When a vehicle leaves the starting line before the green light, indicated by the red light on the Tree. When a foul start occurs in eliminations, the racer is eliminated from further competition at the event (unless his or her opponent commits a worse infraction).

What does 1320 mean in racing?

1320. Slang for the quarter mile (street racing)

Who is Jim Head?

Jim Head is a producer and writer, known for Behind the Camera: The Unauthorized Story of Mork &…

Why does 1320 mean quarter mile?

The 1320 part of its name comes from the distance in feet in a quarter mile. Don’t let its normal Challenger looks fool you: This Scat Pack 1320 is the fastest naturally aspirated showroom stock drag car you can buy.

What is the best Transbrake button?

The TERMINATOR button is the smoothest, most consistent, and most reliable bottom bulb transbrake button on the market.” Designed by the Biondo Racing family, the “Terminator” button was specifically designed for the new NHRA Super Stock, Competition Eliminator, and bottom bulb bracket rules.

What is crosstalk in drag racing?

Cross talk is when the the slower racers tree falls both top yellow bulbs come on then the slower racers tree continues and then the faster one will follow in the difference in ET’s cross talk is to help you always be focused on your top yellow no matter if its eliminations or time runs!

How many professional categories are there in drag racing?

The four Professional categories are Top Fuel, Funny Car, Pro Stock, and Pro Stock Motorcycle. They, along with Top Alcohol Dragster and Top Alcohol Funny Car, the three “Super” classes – Super Comp, Super Gas, and Super Street – and Pro Mod feature a single class of vehicle in heads-up competition.

Can you put a Christmas tree on a car?

It’s not recommended that you put your tree on your car’s roof unless it has a roof rack. … This can damage the tree’s needles, so put something under it, such as an old blanket. Before you leave the lot, make sure to give the tree a firm tug to ensure that it’s not going anywhere.

How does a Transbrake work in drag racing?

In drag racing, a Transbrake is a mechanism that selectively places the transmission in A forward and reverse gear simultaneously. This allows the engine to create full power without transmitting that power through the driveline, allowing the car to stay in one place.

What is a 1 foot rollout?

‘Rollout’ is the distance travelled by a vehicle before the timing lights on a drag strip are triggered. When running performance tests, such as a quarter mile test, this distance is typically 1 foot (12 inches).

What is staging a car?

Staging cars in this context is referring to particular makes, models, or aftermarket part manufacturers that use “Stage 1, Stage 2, etc.” to describe power modifications being added. This method is used to describe a list of parts and/or a tune to increase the amount of power and torque a car will be capable of.

What two performances are being monitored for each run drag race )?

Two performances are monitored for each run: elapsed time and speed. The elapsed time is started when the vehicle first leaves the starting line, breaking the beam that activates the electronic timer.

You Might Also Like