What is the function of the Dslam in a broadband DSL network

DSLAM: a device for DSL service. The DSLAM port where the subscriber local loop

What does Dslam stand for?

DSLAM Definition: A DSLAM, or Digital-Subscriber-Line-Access-Multiplexer, is a network distribution device that aggregates individual subscriber lines into a high-capacity uplink. These high capacity uplinks, either ATM or Gigabit Ethernet, connect subscribers to their Internet service providers (ISPs).

What are two WAN connection enhancements that are achieved by implementing PPPoE?

What are two WAN connection enhancements that are achieved by implementing PPPoE? CHAP enables customer authentication and accounting. PPP enables the ISP to assing an IP address to the customer WAN interface.

How does a DSL modem differ from a Dslam?

How does a DSL modem differ from a DSLAM? A DSL modem produces Ethernet 10Base-T packets so it can be connected directly into a computer or router and hub so that it can serve the needs of a small network. The DSLAM de-multiplexes the data streams and converts them into ATM data, which are then distributed to the ISPs.

What is used by BGP to determine the best path to a destination?

If there are no specific settings that can affect the outcome, BGP Best Path Selection Algorithm determines the best route by selecting the shortest path to the destination. An Autonomous System is a single network or a set of networks and routers, which are under the control of one administrative entity.

Which of the below describes function of DSLAM?

Stands for “Digital Subscriber Line Access Multiplexer.” A DSLAM is a device used by Internet Service Providers (ISPs) to route incoming DSL connections to the Internet. The DSLAM processes each incoming connection and may limit the bandwidth of certain DSL lines. …

Does NBN use DSLAM?

Fibre to the Building (FTTB): Fibre runs to a multi-unit building into an nbn™ co-installed device called a DSLAM. From there, service is delivered to customers over existing copper wires. … FTTC connects a distribution unit, usually housed in a pit in the ground, with the existing copper network via fibre.

What's better DSL or fiber optic?

Fiber is way faster than DSL, more reliable, and sometimes actually more affordable as well. … DSL runs at much slower speeds than fiber, though it’s still fast enough for most of what you’ll want to do online. It’s available practically anywhere, making it ideal for the average user.

Which is better cable modem or DSL explain?

Cable internet runs on the same copper coaxial cable lines that deliver cable TV to your house, so it’s available in most areas that support cable TV service. A cable internet modem usually delivers faster internet than DSL. Cable is highly reliable and isn’t subject to outages due to storms, like satellite internet.

Whats the difference between a cable modem and a DSL modem?

The main difference between DSL and cable modems is with what devices and what services they are linked with. The DSL modem is connected to the telephone line and is thus linked together with your phone service. A cable modem connects to your cable box and is an add-on to your cable service.

Article first time published on

What function does NCP perform in the establishment of a PPP session?

What function does NCP perform in the establishment of a PPP session? It completes the specific configuration of the network layer protocol that is being used.

What are two common types of circuit switched WAN technologies?

The two most common types of circuit-switched WAN technologies are the public switched telephone network (PSTN) and the Integrated Services Digital Network (ISDN).

What is the geographic scope of WAN?

A WAN operates beyond the geographic scope of a LAN. WANs are used to interconnect the enterprise LAN to remote LANs in branch sites and telecommuter sites. A WAN is owned by a service provider whereas a LAN is typically owned by an organization.

How does BGP do load balancing?

BGP load balancing through route recursion The matching route with the direct next hop is called the recursive route. The process of finding a recursive route is route recursion. If multiple recursive routes to the same destination are load balanced, BGP generates the same number of next hops to forward packets.

How does a router choose the best route?

A primary function of a router is to determine the best path to use to send packets. To determine the best path, the router searches its routing table for a network address that matches the destination IP address of the packet.

How does BGP choose routes?

BGP tries to narrow its path selection down to one best path; it does not load balance by default. To do so, it examines the path attributes of any loop-free, synchronized (if synchronization is enabled) routes with a reachable next-hop in the following order: Choose the route with the highest weight.

Does VDSL require a phone line?

While SDSL also requires a separate line from your phone, it uses only a single line instead of the two used by HDSL. Very high bit-rate DSL (VDSL) – An extremely fast connection, VDSL is asymmetric, but only works over a short distance using standard copper phone wiring.

What is the best VDSL modem?

Per-user monitoring.
Compatibility with ASUS AICloud service.
Time-based parental controls.
USB LTE support.
Failover.
Load balancing.

Will a VDSL modem work with NBN?

IS VDSL THE SAME AS NBN? No, put simply a VDSL is a type of modem. You will need a VDSL modem to access the high speed nbn service if you do not have a DSLAM attached to your premises.

What is central office in DSL?

Definition. DSL (an acronym for Digital Subscriber Line) is. [a] high-bandwidth Internet access service offered by some ISPs and telecom operators. DSL incorporates existing copper telephone lines with a specialized modem at the customer’s end and a multiplexer at the central office.

What is the ADSL connection?

Asymmetric Digital Subscriber Line (ADSL) is a technology that provides high transmission speeds for video and voice to homes over an ordinary copper telephone wire. It will be most cost-effective in areas with a low market penetration of cable TV.

What is the speed of HDSL?

TypeDownload SpeedUpload SpeedADSL1.5–9 Mbps16–640 KbpsSDSL1.544 Mbps1.544 MbpsHDSL1.544 Mbps1.544 MbpsVDSL20–50 + MbpsUp to 20 Mbps

How can I make my DSL Internet faster?

When you want to make your DSL connection faster all you have to do is connect your computer to the DSL line. Then you need to connect your computer to a second Internet connection. This could be a separate DSL line, a nearby Wi-Fi hotspot, a cable line, or even a satellite internet connection.

What happens if you don't use a DSL filter?

DSL filters separate the incoming signal, so you can be online and still use your phone, DVR and other devices. When devices aren’t connected to a filter, or filters are installed incorrectly, you can experience: Static or a hissing sound on your telephone line. Slow Internet speeds.

When using DSL or cable to connect to the Internet an external modem is needed?

DSL requires an external powered modem in order to access the Internet. Similar to cable modems, a DSL modem has a line-in connection for a phone line, as well as a single USB port and single Ethernet port.

Is DSL more secure than cable?

Cable is widely considered to be faster than DSL, so if speed is your prime consideration, a cable internet connection is the way to go. Historically, cable was seen as a less secure option because residential cable internet is provided using a shared line, which everyone in the neighborhood uses.

What is PLDT DSL?

When it comes to connectivity services, PLDT has cemented its strong reputation through its Direct Subscriber Line (DSL) internet services. … Fibr, on the other hand, uses fiber optic technology where the internet connection comes from light signals running through thin glass wires.

Which is more stable DSL or fiber?

Fiber internet connections deliver faster download and upload speeds than DSL and cable, usually 250–1000 Mbps. … However, cable and DSL upload speeds are normally much lower, in the 5–30 Mbps range. Fiber may be priced a bit higher, but the service is more reliable.

Can a cable modem router be used for DSL?

The DSL-side cable is a phone line, so, yes you can use any phone line cable to connect. It’s not the router itself which is connected to the DSL line, it’s a modem, which in turn connects by Ethernet cable to the router. However, there are combination router/modems available.

Will a cable modem router work with DSL?

Fiber/Cable Access The WAN port of DSL modem routers also accepts connection from a Cable Modem or Fiber Modem. The modem router woks purely as a wireless router in this scenario, so it needs another modem to connect to your ISP and then provides internet connectivity to your other devices.