What is the proper height for a hanging rail in a wardrobe

A typical closet can include two levels of hanging rods. As a rule, place the top rod 80 to 82-inches up from the floor and the bottom rod about 40-inches up from the floor. For a single rod application, plan 60-inches from the floor for placement.

How far should closet rod be from shelf?

A minimum of 10 inches is best, but it’ll depend on the size of your hangers. If there is a shelf above the rod, determine the vertical distance from the rod to the shelf; two inches should be suffice.

How high should the top shelf be in a closet?

Ideally, the top shelf of a closet is high enough to tuck items out of the way, but low enough that you can retrieve them without a stool. The recommended shelf height is between 87 and 96 inches from the floor. The shelf should also sit at least a foot away from the closet ceiling.

How much space do you need for a hanging rail?

A hanging rail in a traditional closet requires a space 60cm deep. Where space is limited, you could fit the rail perpendicular to the wall, in which case you will need to leave 30cm clear each side of the rail to accommodate the hangers and their coats.

What depth is a wardrobe?

Most wardrobe cabinets typically are 24 inches deep, but can be as narrow as 18 or even 12 inches in depth. Height also depends on application, but standard height is usually no more than 72 inches.

What size should I hang my clothes?

If you’d like to hang garments in your new storage area, we recommend you allow 55cm – 60cm / 22″ – 24″ of space for adult clothes. This will vary slightly depending on the garment and the size of the hangers you use, but 55cm is the minimum dimension you should aim for!

What depth do you need for a wardrobe?

The average standard depth of a hinged wardrobe is 60 cm. However, most wardrobe manufacturers will provide you with depth options between 50 cm to 70cm. If your room is very small, the 50 cm option may work best for you.

What is the standard shelf height?

Shelves and RodsMeasurementShelf depth11 to 15 inchesSingle rod height60 inchesDouble rod height80 inches top, 40 inches bottom, 3 feet apart

How do you install a wall rail?

You’ll find that you can hang most clothes rails in the same way. Firstly, measure your wall and mark the position of the wall brackets. Then drill the required holes for the brackets and fix them to the wall securely with screws. Finally, attach your hanging rail to the wall brackets and screw in place.

How high do you hang double closet rods?

If installing a double-rod closet system, mount the top rod 81-¾ inches above the floor and the lower rod 40-½ inches above the floor.

Article first time published on

Can a closet be 20 inches deep?

When designing a closet, consider the specific efficiencies of each different storage element to better serve your closet needs. The comfortable recommended depth of a closet is 24” (61 cm), but closet depths as narrow as 20” (50.8 cm) can be used if desired.

How far should closet rod be from wall?

For a single rod application, plan 60-inches from the floor for placement. You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging. When spanning an opening of more than 48-inches, consider adding a center support to the closet rod for added stability.

How big should a master closet be?

A walk-in master closet should be a minimum of 7-by-10 feet, and preferably 100 sq. ft. for two users. That gives you space to line two or three walls with shelves, cubbies, and poles, and the elbow room to reach them easily.

What is the average hanging space per person?

Aim for a minimum of 2.4m of wall space per person (without additional bedroom furniture). Allocate 600mm for the widest items you wish to hang, plus an extra 100mm for easy viewing. You’ll need a corridor of at least 800mm as your ‘walk-in’ space.

How do you cut a metal rail?

An oxyacetylene torch or a titanium-coated, high-speed steel saw blade on a hacksaw or right angle grinder can all be used to cut wrought iron. The torch can cut close as long as the rail is attached to concrete or some other nonflammable surface.

Can a closet be 22 inches deep?

The standard minimum depth for a reach-in closet is 24 inches, but a closet intended to store coats or other bulky hanging items may need to be as deep as 28 inches. A closet less than 22 inches deep isn’t deep enough to allow hanging clothes.