The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″.
How far should a toilet be from the back wall?
The Distance To Set The Toilet Flange From The Back Wall. You’ll want to set the center of the water closet flange 12 inches from the finished back wall.
How do you measure a rough-in corner for a toilet?
To determine the toilet rough-in location, measure and mark the rough-in length out from the corner on each wall. For this example, a toilet with a 12″ rough-in was used. 2. Use a straight edge to draw two perpendicular lines from the marks created in the previous step.
How do you measure a 10 inch or 12 inch rough-in for a toilet?
If the old toilet is still there, measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard). There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline. If your measurements are between 11.5 and 12.5 inches, it is a 12-inch rough-in.Can you replace a 12 inch rough in toilet with a 10 inch rough in toilet?
A toilet with a 12-inch rough-in will definitely not fit into a space with a 10-inch rough-in, but a toilet with a 10-inch rough-in actually has extra space in a 12-inch rough-in space.
Can I move a toilet a few inches?
Yes, you can actually move a toilet. Even moving a toilet by a few inches without having to make a new hole in the floor is possible. You can use an offset toilet flange to move the toilet by a couple of inches on any side. This will allow you to use the same wastewater line and in turn help to save you a lot of money.
How do I know what size toilet I need?
Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.
How much clearance do you need for a toilet Canada?
Toilets should have at least 15 inches clearance to side obstructions such as walls, tubs and showers. Measurement is from the center of the toilet. Toilets and sinks should have at least 21 inches (more in some jurisdictions) clearance in front.How far away from the wall does a toilet drain need to be?
Standard drywall is 1/2 inch thick, so the plumber should set the toilet flange at least 15-1/2 inches from the center of the flange to the wall framing. The standard distance from the back wall is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing.
How do you measure toilet depth?To measure the depth of your current toilet, measure from the front edge of the toilet bowl to the back of the tank. If you are comfortable with your current toilet’s depth, then select a new toilet with a similar depth.
Article first time published onDo all toilets fit the same?
For a standard toilet, the rough-in measurement should be between 11 inches and 13 inches. … If the rough-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the space, and you will need to look for a toilet designed for that specific rough-in distance.
What is a compact toilet?
Essentially, a compact toilet simply takes up less space. This is done by giving it a smaller water tank or seat or opting for a round bowl instead of an elongated one. … There are compact toilets that sit on the floor like a standard toilet, and then there are those that are mounted to the wall.
Can I put a regular toilet in a corner?
Yes, you need to move the drain. A typical installation is a 12″ rough in (from back wall) and 15″ -18″ from the side wall. The corner toilet is 12″ from both walls.
Do corner toilets save space?
Do corner toilets really save space? Yes! The toilet tank is typically smaller, and shaped like a triangle to allow the toilet to fit into a corner space of a bathroom. Space that is normally wasted.
Why do toilets have a corner?
Corner toilets are ideal for small toilets because they squeeze into the corner. This leaves more open space for the user’s legs … and for the door to close. But if you don’t like the look of a triangular tank, you could forego the cistern altogether. Tankless toilets are a good workaround.
Why would I want an elongated toilet bowl?
Elongated bowls are also considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.
How do you measure a toilet rough in without a toilet?
To measure the rough-in for your toilet, measure from the wall behind to the toilet to the middle of the closet bolt caps on your current toilet. The closet bolts are the bolts holding your toilet to the floor. If you have baseboards or tiling on the wall behind the toilet, do not include those in your measurement.
What is an offset flange?
Unlike a standard flange, which is centered on the waste pipe, an offset flange is off-center—that lets you shift the location of the toilet by a couple of inches (left, right, forward or back).
Can you replace a round toilet with an elongated toilet?
It’s a good thing that almost all toilets have 12-inch rough-in. Hence, it’s possible to put an elongated seat on a round toilet. You can still do it even when there’s a larger rough-in. However, plumbing configuration or moving the wall to give some more space to the toilet is required.
Are toilet sizes universal?
Are there different sizes of toilet? Yes, toilets come in a range of different sizes, that’s why it’s important to measure your existing toilet seat before you buy.
How big should a toilet room be?
Toilet Compartment Recommendations The size for a separate toilet compartment should be at least 36×66 inches with a swing-out or pocket door. Code Requirement: The minimum size for a separate toilet compartment is 30×60 inches.
How many inches does an offset toilet flange move?
The typical offset is 12-inches for most residential toilets.
Can you move a toilet over 2 inches?
To move the toilet more than just a couple of inches, you will have to demolish the concrete to access and relocate water and waste lines. Then you will have to rebuild the concrete foundation and replace the sub-flooring, flooring, and fixtures.
Is it expensive to relocate a toilet?
The cost to move a toilet or sinks can be $2,500-$3,500 per fixture. Plumbing can be a significant cost factor in a remodel when a bathroom floor plan is altered. The toilet is the most expensive to move. Connecting the toilet to the existing sewer line can be a bit tricky for your plumber.
How much space do you need around a toilet?
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.
How far should a toilet flange be from the side wall?
What should the distance be from the toilet flange to any sidewall or nearby fixture? 15” is the minimum distance from the toilet flange to any sidewall or nearby fixture. You can add more space if you want, but 15” is the very minimum.
How far can toilet be from vent stack?
According to the UPC, the distance between your trap and the vent should be no more than 6 feet. In other words, for the vent to work properly, it needs to feed into the drain line within 6 feet of the trapways that connect to it.
How much space does a toilet need Ontario?
Room or spaceMinimum required floor areaMaster bedroom (without built-in closet)9.8 m 2 (95 ft 2)Other bedrooms (without built-in closets)7 m 2 (75 ft 2)BathroomEnough space for sink, toilet and shower stall or bath
How much space is needed between toilet and vanity in Canada?
A toilet should have some elbow room between it and another fixture or vanity. The NKBA’s recommendation is at least 18″. Codes allow a minimum distance of 15″.
How much space do you need for a toilet UK?
Minimum sanitaryware sizes The toilet and bidets must have a minimum space of 70cm in width and 120cm in length. If they are next to a wall, the minimum free space should be 20cm, and if there is an element on their side, they should not be placed less than 15cm away for greater usability.
Do toilets have different size holes?
Not every toilet requires the same size hole, and clearances also vary, but there is a standard size and placement that works for most models.
