What lane position is best for approaching the crest of a hill

Lane position 2 is recommended when approaching the crest of a hill. Intersections are the highest risk areas you will encounter when driving. It is illegal to pull into a shared left turn lane and wait for traffic to clear when executing a left turn from a driveway.

What lane position should you use when approaching a crest of a hill?

When approaching the crest, reduce your speed and move into Lane Position 3. Keep your eyes on the road ahead as far as your line of sight will allow, making any necessary adjustments to lane position and speed as you progress over the hill.

Is the best position to approach a hill or curve?

Motorists must be prepared to adjust their lane position several times while driving through a curve. Generally, approaching a curve while positioned just inside the right edge of the roadway is the safest move, as this will keep you as far away from oncoming traffic as possible.

Is lane Position 2 is recommended when approaching the crest of a hill?

Never enter an intersection until you identify an open space for your vehicle on the other side of the intersection. Lane position 2 is recommended when approaching the crest of a hill. … It is not necessary to signal before returning to your lane after passing another vehicle.

What lane position is best?

Lane position 1 Lane position one is your primary or “default” position, as it is the safest position to drive in under normal circumstances. Your vehicle is in lane position one when it is central, with at least three feet of space between the sides of the car and the left and right lines.

When you approach the top of a hill you should?

As you approach the top of a hill, you should: Speed up slightly. Prepare to stop, if needed. Maintain a steady speed. Explanation You may not know what is on the other side of a hill or just around a curve, even if you have driven the road many times.

What are the three lane positions?

The three main positions are lane position 1 (center of lane), lane position 2 (left side [3-6]), and lane position 3 (right side [3-6]).

Which lane position should you use if you are in the apex of a curve to the left?

As you approach a curve, move to the side of your lane opposite of the direction of the curve. For example, if the road curves to the left, move to the right side of your lane. As you continue through the curve, position your vehicle towards the other side of your lane.

When nearing a crest of a hill on a two lane roadway you should quizlet?

What should you do when nearing the the crest of a hill on a two-lane roadway??? Reduce speed and move your vehicle to the right half or your lane.

When approaching the crest of a hill on roadways with opposing traffic and limited sight lines you should?

Hillcrests on roadways with opposing traffic and limited sight lines should generally be approached in lane position 3 near the right edge of the roadway.

Article first time published on

How should you approach the crest of a hill?

Keep to the left and slow down. Correct. Keeping to the left gives other vehicles more room, and slowing down ensures that if you reach the crest and see a previously hidden obstacle on the other side you have more time to stop.

Who gives way on a hill?

Always give way to the drivers coming uphill whenever it’s possible. If needs be you should reverse until you reach a location where both vehicles have enough room to pass. It is also recommended by the highway code to slow down on a hill when passing pedestrians, cyclists or horse riders.

What are the four lane positions?

Lane positions – there are five choices for lane position with in a lane: center, left, right and far left and far right.

What is the safest position in traffic?

The safest position in traffic is with few or no vehicles around you. When possible, surround your vehicle with space. Choose the proper lane and adjust speed accordingly to maintain your space cushion. If you lose part of the cushion, work to keep at least the front and one side open.

When coming to a curve or the top of a hill you should?

Only pass the vehicle if a hill or curve is at least ⅓ of a mile away, because you need at least that much room to pass safely. Do not drive on the left side of the road when coming to a curve or the top of a hill, because you cannot see far enough ahead to know if it is safe to pass.

Which lane is the acceleration lane?

Acceleration lane means a short supplementary traffic lane, immediately adjacent to an intersection, by use of which vehicles may enter the intersecting roadway and accelerate to the general speed of passing traffic thereon before emerging onto the continuous lanes of such roadway.

Where do you look when merging?

Look in the rearview mirror, then at your driver’s side mirror.
Glance to see that there is no vehicle in your blind spot (close behind you in the lane that you are merging).
Check whether someone has slowed or stopped in the ramp/merge lane in front of you.

When approaching the top of a hill passing is not allowed when?

When approaching the top of a hill, passing is not allowed within 700-1000ft before.

When driving on a multilane highway you should usually position your vehicle in?

Position your vehicle more than three – four seconds behind the vehicle to be passed. Check mirrors and blind spots for oncoming traffic. Check the passing lane ahead to make sure there’s plenty of space before you try to pass. Signal intent to pass and accelerate quickly to match the speed of traffic flow.

When driving down a mountain road you should never?

Don’t go down a mountain road any faster than you can go up it. Don’t use your brakes to hold your downhill speed. Down shift to S or L – the only time you should step on your brake pedal is to slow while you are shifting down to a lower gear. Resist the temptation of zooming down a hill.

Which lane position should you be in if you are making a left turn and there is no left turning lane?

If there are no signs or lane markings to control turning, you should turn from the lane that is closest to the direction you want to go, and turn into the lane closest to the one you came from.

What is the safest lane for a motorcycle?

1. What’s the safest part of a lane for a motorcycle to ride in? As the Motorcycle Safety Foundation’s (MSF) rider manual explains, you can imagine any lane divided into three equal parts: left, center and right. The safest “default” lane position for a motorcycle is in the leftmost third of the lane.

What is a crest driving?

Road sign – crest This class 1 retroreflective crest road sign is a road obstacle warning sign. … A warning sign is a type of traffic sign that indicates potentially hazardous conditions on or adjacent to the road which may not be readily apparent to a driver.

When approaching a curve or hilltop and you Cannot see the road ahead you should?

Explanation Always slow down near a curve or in any area where you cannot see clearly ahead. Reduce your speed before you enter a curve in the road so you do not have to brake in the curve. Braking in a curve can cause a skid.

What is crest of the hill?

a : peak especially : the top line of a mountain or hill. b : the ridge of a roof. c : the top of a wave.

How do you drive on hills safely?

Weather check. Plan ahead! …
Fill-up on fuel. Most fuel stations in hilly areas shut down in the evening. …
Right of way. Always keep in mind that the vehicles going uphill have the right of way. …
Headlights and high beam. …
Using sprinklers. …
Fog and rain.

What will happen to your car if you drive up a steep hill?

Explanation: The engine will need more power to pull the vehicle up the hill. When approaching a steep hill you should select a lower gear to help maintain your speed. You should do this without hesitation, so that you don’t lose too much speed before engaging the lower gear.

Who gives way on narrow road?

If there is no obvious passing place, one driver must give way. Always drive defensively and be willing to yield to the other driver. Motorists may indicate they are giving way with a wave or a flash of the headlights, but never make assumptions.

What is a single lane road?

Definitions of single-lane. adjective. (of roads) having a single lane for traffic in both directions; when vehicles meet one must pull off the road to let the other pass.