Gas Log SizeFirebox Front WidthSee-Thru Depth (If Applicable)24 Inches28-36 Inches16-18 Inches26 Inches30-38 Inches16-18 Inches30 Inches34-42 Inches16-18 Inches36 Inches40-48 Inches16-18 Inches
How do you know what size gas logs to buy?
- Measure the front width of you fireplace.
- Measure the width at the back of your fireplace.
- Measure the depth from the front to the back of your fireplace.
- Measure the height from the top to bottom of the front your fireplace.
What BTU gas logs do I need?
ModelBTUsSpace it will HeatHeirloom 3627,000 – 45,0001,100 – 1,800 square feetHeirloom 4230,000 – 54,0001,500 – 2,500 square feetHeirloom 5036,000 – 65,0001,900 – 3,000 square feet
How big should a fire log be?
Firewood should be split is 3-6 inches wide and 16 inches long, which is optimal for household fires and stoves. Thinner firewood will burn too quickly while thicker logs take too long to season (dry out). Outdoor fires have fewer log size restrictions and any size firewood can be burned.How wide is a standard gas fireplace?
The standard fireplace opening averages between 24 – 36 inches wide, 24 – 29 inches high, and about 16 inches deep. The distance from the hearth to the fireplace damper should be about 37 inches. The rear of the firebox should be 11 – 19 inches wide and right at 14 inches high.
What is the difference between vented and ventless gas logs?
Vented and Ventless Gas Logs are a little different. Vented gas logs burn like a real wood fire with a yellow flame that produces smoke. … Ventless (vent-free) gas logs burn cleanly with a lower flame that does not smoke. You can burn them with the damper closed to heat your room.
Which is better vented or ventless gas fireplace?
Ventless fireplaces are more energy efficient than vented fireplaces because no heat escapes up the flue, so you’ll save money on gas utility bills. A vented gas fireplace uses more gas to create the same level of warmth because some of its heat escapes through the flue.
How do you replace gas fireplace logs?
- Turn off the gas.
- Remove the old logs from the fireplace. …
- Remove the grate. …
- Disconnect the burner and gas line.
- Clean out your fireplace. …
- Connect the new log set’s gas line to the burner.
- Secure the burner and grate. …
- Inspect the log set for leaks.
What kind of gas logs do I need?
When shopping for gas logs, you’ll need to choose vented or vent-free logs. This decision comes down to many factors, including looks versus efficiency, local building codes and fireplace placement. With vented logs, you’ll enjoy a large, realistic-looking flame that operates with an open chimney flue or damper.
What is the thinnest gas fireplace?Heat & Glo®, the leader in fireplace design and innovative technology, is proud to offer REVO™ Series direct vent gas fireplaces. They are among the thinnest fireplaces ever made with 7-inch deep profiles, making it possible to install or hang them just about anywhere.
Article first time published onWhat length do you cut logs?
Find yourself a nice and straight stick, preferably green and hard like oak or ash. Use a tape measure and cut the stick to either 4 feet or 6 feet exactly. I like to use 4-foot-long sticks because most log lengths are divisible by 4 feet. Mark the stick by cutting a groove in it at 2-foot increments.
What diameter logs should be split?
It is a good idea to split pieces less than 6 inches in diameter because this increases the exposed area of the wood. The greater the surface area, the faster wood dries and the better it burns. Pieces 3 inches and smaller should be used unsplit.
How long should fireplace logs be?
Measure the opening in your fireplace, fire pit or wood stove before you buy pre-cut firewood to be sure the logs will fit. The standard length for a piece of firewood is 16 inches. Firewood is usually sold by the pallet, cord, face-cord or bundle.
How many BTUs is a typical gas fireplace?
Gas fireplaces have a wide range of heat output, from about 7,000 to 60,000 Btus. Use this formula to determine which models generate enough heat to warm your room. The formula assumes that your house is well insulated and has tight windows, and that you like the temperature set at 72 degrees F.
What is a good Btu for a gas fireplace?
Although it varies greatly, Regency’s gas fireplaces typically produce between 20,000 and 48,000 BTU’s, enough to heat an apartment or a mid to large room.
How many BTUs should a gas fireplace have?
You can expect a standard gas fireplace to be around 30-40,000BTUs.
What is a normal size fireplace?
The average fireplace has the following dimensions: An opening that’s between 24-36 inches wide, 24-29 inches high, and 16 inches deep. On average, the distance between the hearth and the damper is about 37 inches. The fireplace’s rear firebox is generally between 11-19 inches wide, with a height of 14 inches.
Are fireplace inserts standard size?
Fireplace inserts are not one-size-fits-all. They must be the right dimensions for your particular space, so measure the height, width and depth of your fireplace from the back wall to the front opening. Use those specs to ensure a proper fit.
What is the average size of a fireplace hearth?
Basic Hearth Dimensions To keep fire, ashes and embers a safe distance from the floor in front of a fireplace that has an opening 6 square feet or smaller, the hearth should extend at least 16 inches in front of the fireplace opening. The hearth also needs to extend 8 inches to each side of the opening.
Do gas logs need a chimney?
Gas logs are a stack of ceramic logs that sit inside your existing fireplace. Gas logs have a gas burner and they come in vent-free and vented options. Vented gas logs vent up your existing chimney, while vent-free gas logs vent all of the heat, and exhaust, into the house (they do not require a chimney or flue).
Are gas fireplaces bad for your health?
Gas fireplaces are generally considered cleaner than traditional wood-burning fireplaces, but they can also pollute indoor air quality if not properly vented. Toxic gasses emitted include deadly carbon monoxide and nitrogen dioxide — a gas particularly harmful to those with asthma.
Can you use a gas fireplace without logs?
You can use a gas fireplace without logs because the heat source is the burner connected to your gas line. Don’t use wood in your gas fireplace, as they weren’t built for wood to be their fuel source. Instead, use a ceramic log in your fireplace for additional reflective heat.
How should gas logs be arranged?
- Place the largest ceramic logs on the bottom to serve as the foundation for the fire. …
- Leave 2 inches (5 centimeters) between logs.
- Make sure none of the logs is blocking the gas flow. …
- Arrange smaller logs on top of the foundation logs.
Do gas fireplace logs heat a room?
Vent-free gas logs are an inexpensive and efficient way to add extra heat to a room without having to open the damper on your fireplace. These logs use the air from within the room for combustion and then put heat back out into the room.
Can I use vent-free gas logs in a vented fireplace?
You can use ventless logs in a vented fireplace. If you do use a vent-free logs, you won’t have to open the damper since these logs don’t require venting. Even though the chimney can remain closed, you will still lose some of the efficiency and heat from using this type of set in a vented fireplace.
Can I install gas logs myself?
Gas log installation should only be done by a certified professional. Homeowners should never install their own gas logs unless they have the tools and training to do so.
How long do ventless gas logs last?
If you have a vented fireplace with ceramic logs, that’s well-maintained, your log set can last a very long time, maybe even ten years or more. However, if you have a ventless fireplace with ceramic logs, and it’s well maintained, those will generally have a 3-5 year lifespan.
Who makes the most realistic gas logs?
#1 CHARRED OAK GAS LOGS By Real Fyre The Charred Oak Gas Log Set by Real Fyre is our top-selling vented log set, and it’s easy to see why! Our customers love this set because it’s an excellent value for the price, easy to install, and the logs, flame presentation, and ember bed are incredibly realistic.
Why are my gas fireplace logs turning black?
Soot buildup is commonly caused by clogged burner ports and improperly positioned fire-logs. A fire-log that’s out of position can obstruct the flame path that ensures the clean-burning of gas. This contributes to soot formation on the fireplace. … If this happens, you’ll need to clean off the fire-logs and doors.
How can I make my gas logs more realistic?
- Step 1 | Install the burner bed on andirons with a grate or in a fire basket. …
- Step 2 | Invest in beautiful ceramic logs. …
- Step 3 | Place a fireback against the back wall of the fireplace. …
- Step 4 | Place antique fireplace accessories around the fireplace.
Can you burn wood in gas fireplace?
To sum things up: never burn wood in a gas fireplace, especially if it’s a gas-only fireplace. There are some types of gas fireplaces that might allow wood burning, but you have to talk to a professional before trying to light up logs on your own.
