What size wood is best for decking frame

Commonly used joist sizes are 2-by-6, 2-by-8 and 2-by-10. For example, when you space joists 16″ apart — which is standard for residential decks — a deck spanning 9 1/2′ would require 2-by-6 joists, a 13′ deck would need 2-by-8 joists and a 16′ deck calls for 2-by-10 joists.

What size timber should I use to build a deck?

45×90 H3 treated pine works great. Spread them at 450 metre intervals and lay them on top of the bearers. Remember that all framing timber should be placed long side to the ground for more strength.

What lumber should I use to build a deck?

The three common choices when it comes to wood decks are redwood, cedar and pressure-treated wood that can be made of various types of wood species. Redwood and cedar are both naturally insect and rot resistant and have a natural look, but each has its own inherent issues.

Should deck joists be 2x6 or 2x8?

For upper-level decks, 2×10 is recommended as the minimum size to use for strong guard post connections. 2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards. … Most decks use 16″ on center spacing for joists.

Can I use 4x2 for decking frame?

4 x 2 Timber Rail / Joist These decking joists are the most common sized framing timber for decking. They provide a solid structure for fixing your decking boards too. When making your decking frame you should use a 400mm spacing between your timber joists.

How far should deck posts be apart?

Starting with your perimeter, mark the location of each deck post to locate the fitting position. In general, posts should be spaced no more than 8 feet apart. Some builders position them every 4 feet for a completely rigid frame. The maximum distance between footings is determined by the size of your joist material.

How far apart should joists be on a deck?

Deck joist spacing should never exceed 16″ on center (with the exception of MAX deck boards, which allow for maximum 24″ on center). For a more rigid feel, 12″ or less may be preferred. If adding additional framing, be sure to keep all boards level and in plane across the tops.

Can I use 2x8 for deck boards?

Q: Can I use 2×8 treated lumber as deck boards? A: No, that’s a not a good idea. Lumber wider than 6 inches should not be used as a flat surface. Wide, flat boards have a tendency to pool rain water, which can lead to cupping problems.

Can you use 3x2 for decking frame?

Building a deck requires joists or framework that are fully treated to cope with all the extreme conditions for external use. Whether you require 3×2, 4×2 or even 6×2 we are able to supply the required timber for the job.

Can 2x6 be used for deck joist?

You can use 2×6 as deck joists if the deck is low enough to the ground as not to require guard railing. When using S-P-F 2×6 deck joists, the span must not be greater than 9’0″ (2.73m) with joists at 16″ o.c. (400mm), and 9’10” (3.01m)with spacing at 12″ (300mm).

Article first time published on

How far can a 2x8 span without support?

In general, a 2×8 will span 1.5 x 8, so 12-feet. Based on all factors though, a 2×8 joist span is 7′-1” to 16′-6”, and a rafter 6′-7” and 23′-9”. In this guide, we’ll explain what span means in terms of construction, factors that impact the span, and how much weight a 2×8 can support.

Can I use 1x6 for deck boards?

Width of material: We recommend only 1×4, 5/4×4 or narrower boards. Never use 1×6 or 5/4×6 material in close to ground applications. Spacing between boards: You must allow space for your deck boards to expand when they take on moisture, as they will inevitably do when exposed to wet weather, rain or high humidity.

How thick should decking boards be?

Most composite brands have the same thickness, but softwoods and hardwoods will range from 1″ to 2″ thick for decking. Softwoods should be at least 1 1/4 inches thick for a 16″ on center span. 2 inches thick will allow for a 24″ on center span.

How many posts do I need for a 12x16 deck?

A standard deck will need four footings parallel to the house, but they will need to be temporarily braced by 6 inch-by-6 inch posts. Using doubled boards, you will then need to build beams on the top row of the posts to frame the edges of the deck. These must be topped with adjustable post caps.

Should I use deck boards or 2x6?

2×6 is thicker and is stronger, but is also more expensive. Spacing between deck boards provide a few critical functions. The primary function is to drain water from the deck. Gaps that are narrow (1/8”), can catch debris, specifically on top of the joists, and can be difficult to clean out.

Do you need to use joist hangers when building a deck?

Are Joist Hangers Necessary? No, joist hangers are not necessary.

Can I use 2x8 for deck joists?

2×8 for joists will be fine, with 16″ OC. Should use 2×10 for beams but 2×8 will be fine as well. If you are worried you can triple the 2×8 for the beams but double will be sufficient. You should put the beams at 7 and 14 feet out from the house, with the piers you should do 3 per beam with spacing of 1, 7, 13.

How many posts do I need for a 12x12 deck?

Before starting to build, the first question is: How many footings do I need for a deck? For an attached 12 x 12′ deck, you’ll need at least 3 footings, plus at least 2 more if you’re planning on building stairs with it.

What should you not do when building a deck?

Poor planning. Building a deck takes a lot of planning. …
Improper footers. Every structure is only as good as its foundation. …
Wrong materials. …
Improperly installed ledger boards. …
Not following manufacturers’ instructions.

How many posts do I need for a 10x10 deck?

A freestanding 10′ x10′ deck needs 4 posts, supporting two pairs of 2-ply non-incised 2×8 beam, upgrading the beam to 3-ply using incised wood.

What is 2x8 lumber used for?

2×8 Yellow Pine Lumber, #1 Grade, S4S Kiln-dried and #1 framing grade. This board is a more economical choice and often used for construction, rustic furniture making and bed frames. Boards are S4S where both side and edges are planed smooth.

How far can I span a 2x8 for a deck?

Using this rule, a 2×6 will span 9 feet, a 2×8 will span 12 feet, and a 2×10 will span 15 feet. As you can see, the larger the depth, the longer the span.

Should deck boards be spaced?

Proper wood deck board spacing should have at least a 1/8 inch gap after the decking has dried out. If you install your wood or treated deck boards while they are still wet boards, then they should be attached without a gap between them.

How far can a 2x6 span for deck?

A decking board made up of 2x6s can span a maximum distance of 24 inches from joist to joist.

How much weight can a 2x6 deck support?

According to the Codes, a 2×6 on edge with the weight pressing through 5.5” of wood will support approximately 53lbs per linear foot. So, an 8-foot length will support about 424lbs. However, a short span 2×6 on edge can support between 600 and 900lbs depending on wood species, grade, and other factors.

How far can a 2x6 beam span on a deck?

A 2×6 joist can span up to 9 feet, a 2×8 can span up to 12 feet, and a 2×10 can span up to 15 feet. With this in mind, the depth of the joist determines the spacing of the beams.

How far will a 2x10 span?

Douglas fir 2-by-10 joists graded as “Structural Select” allows joist spans up to 21 feet for a live load of 30 pounds per square foot when spaced 12 inches apart, 19 feet 1 inch for 16 inch spacing and 16 feet 8 inches for 24 inch spacing.

How much load can a 2x8 carry?

Span (feet)Weight Supported (lb)2 x 2″ x 6″2 x 2″ x 8″42250469061680313082660

Does double joists increase span?

For example, if you double the thickness or number of joists in a floor, the distance the boards can span will increase by approximately 25%. But if you double the width of the boards, the distance the joists can span increases between 80% to 100%, even though you’re using the same board feet of lumber.