Where is the serial number on a chainsaw

Most serial numbers are stamped in the motor housing or crankcase to the left or right of the muffler looking down from the top on a flat surface. They will in most cases be 9 digits long and begin with the number 1, 2 or 5.

How do you tell what year a chainsaw is?

  1. Locate the serial number for your saw. …
  2. Read the front and back pages of the owner’s manual for your saw, if you still have it, which may indicate the year the saw was made or sold. …
  3. Contact the manufacturer of the saw to find out information on it based on the serial number.

Where is the serial number on a Craftsman generator?

The model and serial numbers are located on a sticker right under the seat. The model number usually begins in “917.”

Are craftsman and Poulan chainsaws the same?

Since Poulan is owned by Husqvarna, the two brands often share technologies. … Most mid-level Craftsman products in the power equipment segment are slightly altered Poulan products.

How do I look up a serial number?

  1. Option one: Open Settings > About Tablet > Status > Serial Number.
  2. Option two: For most products, the serial number can be viewed at the bottom of the device back cover.

When was Husqvarna 61 made?

it was made in the 47 week of 1995.

Where is the serial number on Stihl ts410?

I believe it is a Stihl TS 410 or 420. The serial number should be located on a horisontal flat to the right of the muffler, and with the serial number in hand it should be possible to find out which model it is. Good luck with it!

How much horsepower does a Stihl chainsaw have?

MODELDISPLACEMENTENGINE POWERMS 361 C59.0 cc (3.6 c.i.)3.2 kW (4.3 bhp)MS 440 STIHL Magnum70.7 cc (4.3 c.i.)4.0 kW (5.35 bhp)MS 460 STIHL Magnum76.5 cc (4.7 c.i.)4.5 kW (6.0 bhp)MS 460 M Rescue76.5 cc (4.7 c.i.)4.5 kW (6.0 bhp)

Where is the serial number on a Husqvarna chainsaw?

The Husqvarna model number, part number, and serial number tag can be located on the frame near the left rear wheel. The model number tag can also be located on the inner frame near the right wheel fender. You may have to lift the seat to gain access to the sticker.

Who makes a Craftsman chainsaw?

Although Craftsman chainsaws are made by Husqvarna, or one of their subsidiary companies, they are generally cheaper than those bearing the Husqvarna brand. Though, the best technology is reserved for Husqvarna products, with Poulan and Craftsman being more affordable options of a high quality standard.

Article first time published on

Are Craftsman chainsaws made in America?

ECHO chainsaws are built in the United States but include components from both foreign and domestic locations. Manufacturing plants for ECHO products include Yokosuka and Morioka, Japan; Shenzhen, China; and Illinois, United States.

Who makes Troy Bilt chainsaws?

TypeJoint venture of the Moll Family and Stanley Black & DeckerWebsiteMTD Products Inc.

How do you read a craftsman serial number?

Write down the first six numbers of the mower’s serial number. The first two numbers are the mower’s month of manufacture. The second two numbers indicate the day of manufacture and the third two will signify the year of manufacture.

What is model number for Craftsman YS4500?

Model #YS4500 917287220 Craftsman lawn tractor.

Where is the model number on Craftsman tool box?

The model and serial numbers of tool chests are normally on a tag on the back of the cabinet. Pull the tool chest out and look on the back of the cabinet.

How do I check my US serial number?

A unique combination of eleven numbers and letters appears twice on the front of the note. Each note has a unique serial number. The first letter of the serial number corresponds to the series year. A “star” suffix is used to identify notes that serve as replacements during the production process.

How do I find out my laptop serial number?

Open up the command prompt window on your computer. You can do this by searching for “cmd” or right clicking on the windows home icon in the bottom left corner of the screen. In the command window type in “wmic bios get serialnumber”. The serial number will then be displayed.

How can you tell what year a serial number is?

As noted, the vehicle’s year is identified by a letter or number in the 10th position from the left in the VIN. As shown above, the 10th character of the VIN indicates its model year.

Where is the serial number on a Stihl disc cutter?

The serial number on most Stihl chainsaws is on the top side of the saw body, right of the muffler (see image). The number is stamped onto a flat metal surface on the motor housing or crankcase, but may also be dot-printed into plastic in some newer models.

How do you read a Husqvarna serial number?

On the plate, the top number is the Husqvarna model number, the second is the part number of the unit, and the bottom number is the serial number of the unit.

How do you decode a Husqvarna serial number?

Nameplate fieldExample values:Year of manufacture:1998Serial number:8401234Company name:Husqvarna AB

How do I tell what year my Husqvarna chainsaw is?

Call Husqvarna customer service at (800) 487-5951 and relay the model and serial numbers to the representative. He should be able to help you pinpoint the year of your Husqvarna product.

Where is the serial number on a Husqvarna z254f?

ON the Husqvarna site, it says it’s on the back of the bulkhead on the left side near the engine.

What do Husqvarna serial numbers mean?

The first two digits are the year 05 = 2005. The next two digits are the week 42 = 42 week of the year. The next five digits are the sequential production = 00362 how many units produced. Click here for a comprehensive list of how to find model and serial number format on all Husqvarna products.

Where is the serial number on a Jonsered chainsaw?

Your Jonsered equipment has a factory model number and serial number on a sticker-like label or metallic tag attached to the unit in a place away from moving parts (usually near the handle, under the seat, or on the side of the unit).

What does MS mean on STIHL chainsaws?

What does MS mean? We’ll start with an easy one. Every STIHL chainsaw model name starts with MS, MSA, or MSE. The common part, MS, stands for Motorsäge which is German for chainsaw. MSA indicates that it’s a battery chainsaw and MSE tells us that it’s an electric model.

What is the most powerful chainsaw in the world?

Technical dataValuePower-to-weight ratio kg/kW1.5STIHL Oilomatic saw chain pitch/type.404″ Rapid Super

How old is a 038 STIHL chainsaw?

The Stihl 038 chainsaw was made in the early 1980s and proved to be popular. It originally came in two models, one slightly more powerful than the other. Buyers had a choice of four bar lengths – 14 1/2 inch, 16 inch, 18 inch and 20 inch.

Who makes the best gas chainsaw?

RatingProductBest OverallRemington RM4214 Rebel Gas ChainsawCHECK PRICEBest ValueHusqvarna 455 Rancher Gas ChainsawCHECK PRICEPremium ChoicePoulan Pro 20″ Gas-Powered ChainsawCHECK PRICEBlue Max 8901 Gas ChainsawCHECK PRICE

What company makes Ryobi chainsaws?

Who makes Ryobi chainsaws? The manufacturer Ryobi is owned by Techtronic Industries, based in Hong Kong. Techtronic Industries is the original manufacturer for cost effective brands such as ‘Craftsman’ and ‘Ridgid’ as well.

Where are Echo chainsaws made?

The ECHO brand is owned by Yamabiko Corporation of Japan. Products are designed by Yamabiko engineers and manufactured in Japan, and globally, to Japanese standards. Products are distributed by ECHO Incorporated, a Yamabiko subsidiary based outside Chicago, IL USA.

You Might Also Like